QA

Question: Why Is Counter Depth More Expensive

Why does counter-depth cost more?

To achieve the same capacity as a standard appliance, a shallower counter-depth appliance needs to be considerably wider. This can mean a reduction in countertop space, as well as a wider door that requires a larger swing radius. And this special design may cost more than a standard appliance.

Is a counter-depth fridge worth it?

The main reason to get a counter-depth fridge is aesthetics. They just look better! They’re also more expensive and offer less flexibility in terms of features — most are arranged in a French door-style; you won’t find many options for a single-door, counter-depth fridge.

Is counter-depth or standard better?

With a refrigerator depth between 23 to 27 inches, counter-depth fridges are typically wider and taller than standard-depth fridges to compensate for the reduced volume and to be more space-efficient.

Do counter-depth refrigerators have less space?

Because counter-depth fridges are shallower than standard ones, they tend to offer less cubic feet of interior food storage space. Standard fridge/freezer combos average between 22 and 31 cubic feet of space, while baseline counter-depth fridges are between 20 and 23 cubic feet. Shallower depth can be limiting.

Should refrigerator be flush with cabinets?

In short, the answer is yes. Your fridge will need about two inches of space away from the wall in the back to allow for air circulation. On the sides, you’ll want your fridge to have about 1/8 inch for a standard fridge and about 1 inch on each side for cabinet depth.

What is the best month to buy appliances?

September and October: The best time to buy most major appliances is during the months of September and October. During these two months, manufacturers unveil their latest models. This means that the previous year’s models must be discounted in order to make room for the new models that will hit stores in the winter.

Should your fridge stick out?

Standard refrigerators are typically 32 to 36 inches deep or more, and since countertops are normally about 25 inches deep (24 inches for the base cabinet with a 1-inch overhang) this means that a standard refrigerator will stick out from adjoining countertops by 6 inches or more.

Is Frigidaire a good brand?

According to the community survey website Ranker, consumers have Frigidaire ranked as the best appliance brand by a wide margin. Their side-by-side refrigerators have been recognized by Consumer Reports as exceptionally reliable. Frigidaire’s offerings are both basic/easy to use and price-friendly.

How tall is the average counter?

The Standard Counter Height Kitchen – The standard kitchen counter height is 36 inches (3 feet) above the floor. Kitchen islands designed for bar-style seating can climb as high as 42 inches.

What is a French door on a refrigerator?

French door refrigerators have one continuous refrigerator space on top accessed by two doors, with a freezer drawer below. Both models tend to come with a wide range of features such as exterior ice and water dispensers, adjustable shelves and door bins, along with higher-end finish options.

How much space should be between kitchen island and counter?

Distance Between Island and Counter Recommended distance between kitchen work areas, which can include both perimeter countertops and kitchen islands: 42 inches minimum in a single-cook kitchen. 48 inches minimum in a kitchen where more than one cook may be working.

What is full depth vs counter-depth?

Counter depth refrigerators are shallower and wider than standard depth refrigerators, with a depth range of 23 to 27 inches. These units usually have French doors or side-by-side doors, with a smaller freezer compartment on the left and a larger refrigerated section on the right.

What is the difference between counter-depth and regular refrigerators?

Counter depth refrigerators tend to be shallower than standard depth but they generally will be wider or taller. This unit typically is 23 to 27 inches deep; the shallower depth makes it easier to grab items near the back of the fridge and provides a blended look with it’s surroundings.

What is the depth of a typical kitchen counter?

While the standard kitchen countertop depth is 25 ½ inches, most kitchen island countertops can go up to 27 or 28 inches deep and over 30 inches deep if it comes with a breakfast bar.

How many inches deep is a counter-depth fridge?

Most counter-depth fridge dimensions top out with a depth of around 30 inches. By contrast, traditional refrigerators can be as deep as 36 inches. To make up for the shallower depth measurement, standard counter-depth fridge dimensions tend to be wider (around 36 inches).

Will a 36 inch refrigerator fit in a 36 inch opening?

Usually! A 36″ refrigerator is designed to fit into a 36″ finished opening!! A 36 inch wide refrigerator should only be placed in an opening at least as wide as the manufacturer’s recommendation. Remember that appliances are NOT built to machine-shop tolerances and neither are cabinets.

How far away from the wall should a refrigerator be?

You should leave between 12 to 12 of clearance between the walls and cabinets. You should leave at least 1 inch of clearance in the rear. 1-2 Inches is ideal because it will help push the fridge out slightly away from the wall.

What refrigerator has the smallest depth?

Above: The Liebherr 36-Inch Counter-Depth 4-Door French Door Refrigerator (CBS2082) is the most shallow on our list at 24 inches deep.

Is 2 cubic feet a lot in a refrigerator?

Refrigerator capacity ranges It varies, but a general rule of thumb is that you’ll want 4 to 6 cubic feet (cu. ft.) of refrigerator space per adult in your household, along with a little bit of extra contingency room.