QA

Quick Answer: Why Is My Car Overheating And Blowing Cold Air

This can have a number of causes, with a faulty radiator cap being the most common. If you notice your engine is overheating, it also could be a blown head gasket, which is much more serious. Air bubbles in the cooling system can cause your heater to blow cold air, but they can do much worse if left unchecked.

What does it mean when your car overheats and starts blowing cold air?

If the heater is blowing cold air and the car is overheating, it is likely that the problem is related to the engine cooling system as well. The following are some issues that may be causing the heater to blow cold air: Low coolant levels. A plugged/clogged heater core.

Why is my car overheating and not blowing heat?

This may be due to a faulty heater blower motor or potentially a bad heater core. Engine overheating can be caused by a number of things such as low coolant levels, a faulty thermostat, or a failing coolant fan switch.

Will a clogged heater core make my car overheat?

A low coolant level (caused by a leaking heater core) can lead to overheating and possible engine damage. Even a clogged heater core has the potential to obstruct coolant flow enough to cause overheating. A low coolant level (caused by a leaking heater core) can lead to overheating and possible engine damage.

How do I know if my thermostat or water pump is bad?

You should be able to turn on your heating or cooling system from the thermostat, or change operation back and forth from heating to cooling. If you make changes at the thermostat and get no response whatsoever from your furnace, air conditioner, or heat pump, it could mean the thermostat is bad.

How much does it cost to replace car thermostat?

But for the average car owner, you can expect to pay between $140 and $300 for a professional mechanic to replace the thermostat in your vehicle for you. The cost of the actual thermostat unit itself is usually between $20 and $80 but can be more for luxury or sports cars.

How expensive is it to replace a heater core?

Replacing the heater core can be an expensive job, and usually costs between $564 – $927 for parts and labor. The parts aren’t particularly expensive, normally costing $80 – $234, but the location of the heater core means that labor costs tend to be quite high.

How do I know if my heater core is clogged?

Heater core failure symptoms Weak or no airflow. Cold air (not warm) coming through the vents when the heater is on. Coolant leakage visible inside the cabin or a damp smell.

How do you know if your thermostat is bad in your car?

One of the first things you will notice is the temperature gauge is higher than normal. It may even start to fluctuate frequently. If you notice the gauge is hovering ¾ of the way from the top, then your thermostat is experiencing damage in the form of overheating. This can soon lead to your engine and car overheating.

How do I know if my radiator is blocked not circulating coolant?

Turn on your flashlight, and point it downwards into the radiator. Look for an uneven flow of coolant. If the radiator is blocked, the coolant will not flow evenly. Another quick way to check for a clogged radiator is to ask someone to rev the engine while you are squeezing the radiator hose.

Will a coolant flush unclog a heater core?

Hot coolant that has passed through other parts of the engine is run through the heater core as air is forced past it and into the cabin of the vehicle to heat it. Flushing the heater core can remove these clogs, but if it fails to work, you may need to have your heater core replaced.

How do you flush a clogged heater core?

Now, here’s how to perform a heater core flush: Step 1: Locate the Heater Core. First thing’s first. Step 2: Disconnect the Heater Hoses. Step 3: Apply the Pressure. Step 4: Hit it with the Hose. Step 5: Reconnect the Heater Hoses. Step 5a: Flush your entire cooling system with Thoro-Flush. Step 6: Refill the Coolant.

How do I test my car thermostat?

Start your car’s engine and allow it to idle. Look through the radiator filler neck to see if the coolant flows. At this time, it should not be flowing as your car has not reached the operating temperature to cause the thermostat to open. If you find the coolant is flowing, it means the thermostat valve is open.

Can you drive a car with a faulty thermostat?

It is not advisable to drive the car with broken thermostat valve. You car can drive when engine condition is cool till it achieve the max temperature. If the thermostat valve of your car is broken or not working properly there may maximum chances of engine over heating.

How do you know if your car needs a thermostat?

If you notice any of these telltale signs, your car may need a new thermostat: The temperature gauge says the engine is very hot or cold. The engine tends to overheat. The temperature in your car often changes drastically. You have coolant leaking under the car.

Do you have to drain coolant to replace heater core?

Drain whatever coolant remains. Before installing a new heater core, transfer any parts from the old heater core to the new one. Install the new core, reinstall or replace the mounting clamps and then the hoses as well as the heater drain tube.

Does coolant go to heater core?

As coolant circulates through the engine, some of that hot coolant passes through the heater core in the dashboard. As you use the temperature controls on your dashboard, your blower fan then moves the warm air to where you need it, for defrosting your windshield or heating the interior.

Where is the heater core in a car?

A heater core is a small radiator located under the dashboard of the vehicle, and it consists of conductive aluminium or brass tubing with cooling fins to increase surface area. Hot coolant passing through the heater core gives off heat before returning to the engine cooling circuit.

How much does it cost to unclog a heater core?

In general, a heater core flush typically costs somewhere in the neighborhood of $75-$100.