QA

Quick Answer: Why Is My Chainsaw Not Cutting

Why is my chainsaw smoking and not cutting?

This most commonly is a result of a dull chain and exerting to much pressure on the bar and chain trying to make the chain saw cut. This could also be either a lack of bar and chain oil ( tank empty, restricted oiler hole ) or an inferior type of oil that is being slung off the chain and not lubricating.

Why does my chainsaw burn the wood?

If the oil pump for the bar oil is not pumping oil on to the bar it will cause the chain and the bar to get very hot. If this is happening, it may cause the wood to burn. The only other thing I can come up with is the chain may be very dull or on backwards.

Why is my chainsaw grabbing?

Teeth are totally broken or worn out unevenly. Regular issues with chain Tension. Presence of smoke when cutting. An unbalanced feel when using the chainsaw or it cuts unevenly during use.

How tight should a chainsaw blade be?

A properly-tensioned chainsaw chain should still be just a little loose on the chainsaw guide bar, but the chain needs to be tight enough that you can’t pull the drive links out of the bar nose.

Is it harder to chainsaw wet wood?

Does this pose any risk to your chainsaw? In all honesty, no! The additional moisture found on wet wood will not make any difference to the cutting process. It doesn’t place any additional resistance on the chainsaw, and no additional effort is required to cut through it.

Is it worth sharpening a chainsaw?

Sharpening your chainsaw chain is definitely worth it as a sharp chainsaw chain is easier to work with. It takes less effort to cut through wood and your chain will make cleaner cuts with sharp blades. A chainsaw chain can be sharpened multiple times without much of a cost.

How often should you replace your chainsaw chain?

When you own a chainsaw and see that it does not cut as well anymore you will have to decide whether to replace it or sharpen the chain. A chainsaw chain could serve you for more than five years if it is occasionally used, and still help you accomplish most of your tasks.

Why does my chainsaw pull to one side?

When you notice your chainsaw pulling to one side as you cut, or your chainsaw is cutting crooked, it’s likely there’s an issue with the chain, advises Madsen’s Shop and Supply. Check the size of the top plates, which sit on the longer sections of each tooth on the chain. These top plates should be the same size.

How long should a chainsaw bar last?

Re: how long does a bar last The next, a Granberg, lasted about 2 months. About that time Stihl started using them with the same results. A good bar can be filed a few times on both sides and the tip replaced when needed. They could last almost as long as the saw.

Can you flip a chainsaw bar?

Every chainsaw bar has been designed to be mounted right-side up or upside down. The reason for this is that it allows the user to extend the life of his chainsaw bar by 50%. Flipping the bar will give the heavily-used areas some relief from wear and tear. This reduces a chainsaw’s ability to cut accurately.

How often do chainsaws need sharpening?

A chainsaw may only need to be sharpened once a year if it is rarely used, but a tool that is frequently used will need to be sharpened regularly to ensure that the blade doesn’t get too dull. On average, a chainsaw blade will retain its sharpness for about 3 hours of actively cutting through wood.

Why does the chain on my chainsaw keep coming loose?

Chain Not Set Properly One of the most common reasons why your chain might be coming loose is because it was not set properly. When you go through the steps to tension your chain, you need to finish those steps by setting the tension so it won’t change as you work your saw.

Why won’t my chainsaw chain tighten?

If you can’t tighten the chain, you may not be implementing the proper tightening procedure. To adjust the chain, loosen the nuts that hold the guide bar in place. Attempting to turn the tension screw without loosening the nuts first may be the reason you can’t tighten the chain.

Is it OK to leave a chainsaw in the rain?

Yes, you can. The pouring rain will not damage your chainsaw, and you can perfectly continue working on your project. Just make sure the engine is not submerged in water. So, if you were thinking about postponing your woodcutting plans due to rain or snow, now you know there is no harm.

Should you split wood wet or dry?

Dry Wood Is Typically Easier to Split Normally, though, you’ll find that dry, seasoned wood is easier to split than wet wood. Regardless of the tree species from which it was harvested, dry wood contains less moisture, so there’s less resistance when cutting and splitting it.