QA

Question: Why Is My Whirlpool Fridge Not Making Ice

A Whirlpool refrigerator not making ice may come down to incorrect temperature settings. For proper ice production, the freezer should be set between 0-5°F. If the temperature is too warm, ice may not adequately freeze and can appear smaller or misshapen.

How do you reset a whirlpool ice maker?

The reset button is usually located at the bottom of the ice maker unit or in some cases at the top or on the bottom of the ice tray. Once located, press the button down for a few seconds until you hear a beep sound. Once you hear the beep sound, let go of the button. Once reset, check if the problem has been solved.

Why my refrigerator is not making ice?

If your ice maker isn’t producing ice at all or is producing crescents or cubes that are smaller than usual, it’s typically indicative of a clog somewhere along the supply line. Cause: A common cause for a clog is frozen water in the line. Fix: To repair a frozen line, slide the refrigerator and unplug it.

Why is my ice maker not dropping ice?

One of the most common – and innocent – causes of an ice maker that won’t dispense ice is that an ice clump has formed inside. In order to drop the ice cubes from the mold, heat is released to lightly melt them. Sometimes you may need to remove the entire bin or even defrost the ice maker.

Will unplugging my fridge reset the ice maker?

Leave the refrigerator unplugged for 5 minutes. This will allow the ice system to reset. After 5 minutes, replug the refrigerator and turn the switch back on. This should cause the ice maker to start working again.

Where is the reset button on ice maker?

The reset button is on the right side of the ice maker – it is a clear, rectangular, rubber button. Press and hold the reset button. For 2010 models or newer: You will hear a chime when the reset begins. For 2009 or older: Press and hold the reset button for a full 10 seconds.

How do you troubleshoot an ice maker?

Ice Maker Not Making Enough Ice Check your refrigerator and make sure it’s perfectly level. Check your ice maker unit and make sure it’s level. Check the water supply line for damage, pinching, or kinks. Check the fill cup; make sure it’s aligned correctly with the water funnel.

Can water filter cause ice maker not to work?

While a clogged water filter could be the cause of your ice maker not working, there are more common causes. If there is ice blocking it, then the ice maker will get the message it should not be producing more ice. Check the water supply to make sure it is going from the fridge to your freezer.

Is there a reset button on a Whirlpool refrigerator?

Some Whirlpool refrigerators allow a soft reset. If your Whirlpool refrigerator is not functioning correctly, locate the door switches inside the refrigerator. Once you find them, press and release them. The fridge display will temporarily go blank and then kick back into normal operation.

Why won’t my Whirlpool ice maker dumps ice?

What it Does: A common cause for a Whirlpool ice maker not working is jammed ice crusher blades. If so, pour warm water over them until the ice melts. However, if the blades are damaged or broken, they will need replacement.

How do I manually reset my ice maker?

Turn The Ice Maker Off and On Again This is a simple matter of resetting the power to your ice maker. By flipping the switch off and back on, you may be able to reset the functionality so that your ice maker begins to dispense ice again.

How do I reset my Whirlpool ice maker under 5 minutes?

Press the on/off Switch Remove the ice tray and cover plate (or just the ice tray). Turn the switch from on to off. Unplug the ice maker at the mains. Wait 10 minutes. Plug the ice maker in again. Turn the switch from off to on. Replace the ice tray and the cover plate as necessary.

How do I make my ice maker cycle?

How to Force an Ice Maker to Cycle Open the freezer door to remove the ice bin from below the ice maker. Empty the ice from the bin. Press the ice maker toggle switch to the “On” setting if it is not already activated. Pop off the front cover of the ice maker with the tip of a flat-blade screwdriver.

How often does Whirlpool refrigerator make ice?

A typical ice maker cycle can take up to 90 minutes to produce 8-10 ice cubes. That’s about enough cubes for 1-2 glasses of ice. On average, your ice maker should be producing between 80-90 cubes per day, which is about 3 lbs of ice. Most refrigerator ice maker bins hold between 4-11 pounds of ice.

How long does a Whirlpool refrigerator take to make ice?

It will take 6 to 12 hours for the fridge-freezer’s ice maker to make ice after you have installed it. The first three batches of ice cubes should be thrown away to make sure all the ice cubes you use are made from clean water.

How do you turn on the fast ice on a Whirlpool?

Press FAST ICE to turn on the Fast Ice feature. When the feature is on, the Fast Ice icon will appear on the dispenser display screen. The Fast Ice setting will remain on for 24 hours unless manually turned off. To manually turn off the Fast Ice feature, press FAST ICE again or adjust the freezer temperature set point.

How do I know if my ice maker is bad?

If the ice maker makes cubes and kicks them into the bucket – the water inlet valve is bad. If there are no new cubes in the bucket – the ice maker is bad.