QA

Question: Why Is The Glass On My Gas Fireplace Cloudy

The process of burning natural gas produces moisture that has a high level of sulfuric acid. That acid etches the glass, making the foggy appearance permanent.

How do you clean cloudy fireplace glass?

Use a cream cleanser like Imperial Gas Fireplace Glass Cleaner. Pour about 2 tablespoons directly on to the glass. Spread the cleaner around using a soft cloth – preferably cotton. Leave the cleaner to sit on the glass until completely dry, this takes about 15 minutes.

What causes white film on gas fireplace glass?

The main reason the glass develops a white powdery film is due to moisture in the gas (both natural gas and propane gas) it burns not being completely dried before turning off your fireplace. The other cause of dirty glass is`1 black soot. The soot will continue to build and can cause a dangerous situation.

How do I get my fireplace glass clear again?

Using a spray fireplace glass cleaner is one way to clean a fireplace glass door. Spray the solution to the glass and let it sit for a few minutes. Then, grab a soft, clean rag (or paper towel) and gently wipe in a circular motion. Repeat if soot is still present.

Does vinegar clean fireplace glass?

You can clean your fireplace glass with distilled white vinegar; and by adding a small measure of baking soda, this will form a paste that can serve to loosen and remove stubborn soot marks. Use old newspaper to clean the glass interior surface.

Can you use Windex on fireplace glass?

DO NOT USE WINDEX or other glass cleaners – gas fireplace glass is special and so it needs a special cleaner. It’s a cream-based cleaner that will help lift that white film without scratching or doing damage to the glass.

Can I use oven cleaner on fireplace glass?

If the deposit build-up is too thick or hard for basic glass cleaner or ash to work, then a commercial oven cleaner can be used. The fireplace glass should be completely cooled before applying the oven cleaner. Wipe the glass with a damp cloth or sponge after the time indicated on the product.

What is the white stuff in my gas fireplace?

New Member. One of the byproducts of the combustion process in a gas appliance, is a mineral which can show up as a white film on the ceramic glass of the viewing door.

How do I keep my fireplace glass from turning black?

Tips to Prevent Soot Build Up on Wood Stove Glass Always burn well-seasoned wood in your wood stove. Try burning harder woods like oak, cherry, or walnut, and avoid burning woods known for their higher sap content. If your wood stove has a heat setting, try turning the heat controls up a few notches.

How do you clean a gas fireplace screen?

How to Clean a Mesh Fireplace Screen Wet a cloth and use it to wipe down the front and back of the mesh screen. Rinse your cloth out and then add a squirt of dish soap. Rinse the mesh screen out by holding it under the faucet. Dust the mesh screen in between cleanings so that the soot does not build up as quickly.

Can I remove the glass from my gas fireplace?

Can I remove the glass panel on my gas fireplace? The glass panels on Direct Vent gas fireplaces cannot be removed. They are sealed combustion systems and need the glass to function properly.

Can you clean fireplace logs with water?

Brush and Inspect Use a hand broom or soft paintbrush to carefully brush away dust and dirt on each log or decorative component. Never spray cleaners or water onto gas fireplace components.

What are the glass doors on a fireplace for?

Glass doors actually help your fire burn better. By enclosing the burning area, firewood is able to burn greater and produce more heat. The glass doors also absorb and radiate heat into the room better than a fireplace without doors.

How do you clean smoke out of glass?

Here’s how to do it: Pour alcohol or vinegar solution, then seal the bag/container. Soak for 30 minutes minimum (longer for frequently used pieces). After the soak is complete, shake well, then scrub where needed with a cotton tip or brush. Rinse thoroughly with warm water.

How do you clean burnt glass?

Steps to Remove the Burnt Stains: Moisten the sponge or soft cloth with water. Pour a couple teaspoons of baking soda onto the cloth or directly into the glass cookware. Scrub the burnt areas with the baking soda and soft cloth until they are removed. If the stains remain, rinse with water.

Why is Windex bad for fireplace glass?

You should not use Windex or any other ammonia based glass cleaner as it could have adverse effects. This is because carbon is the primary source of buildup on the fireplace glass, and ammonia-based cleaners are not formulated to clean carbon deposits.

What can I use to clean the inside of my fireplace?

Mix 6 tablespoons of TSP, 1 cup of bleach and 1 gallon of warm water into a plastic bucket. Wearing rubber gloves, dip your nylon brush into the bucket, and then use the solution to scrub the walls and floor of your fireplace until they’re clean. (Old fireplaces may contain stains you can’t remove.).

What removes creosote from glass?

To clean your glass, either leave the damper open while reloading to burn it clean, using the built-in airwash, or wait for your stove to cool, and use damp newspaper dipped in ash to quickly and easily remove some of the creosote buildup.

Can Easy Off be used on glass?

Yes, EASY-OFF® Fume Free Oven Cleaner can be used to clean the glass window on your oven door.

Do gas log fireplaces need to be cleaned?

Yes, your gas fireplace needs to be cleaned regularly. Regular cleaning will help keep your fireplace performing efficiently and safely for years to come. Be sure to clean your fireplace annually for best results.

Can you get carbon monoxide poisoning from a gas fireplace?

Yes, gas fireplaces are one potential cause of carbon monoxide poisoning. While there are many potential sources of such exposure, including certain appliances and devices, motor vehicles and wood stoves, gas fireplaces are a common culprit.

Do gas fireplace logs need to be replaced?

The good news is you don’t need to replace your entire fireplace setup to improve its performance or appearance. Changing just the logs can give your fireplace the reboot it needs. The ceramic logs for gas fireplaces have improved through the years so that they mimic real wood with great detail.