Table of Contents
Gutter hooks or decorating clips. To hang string and rope lights, you’ll want to use outdoor decorating clips that are suitable for string lights to hang them between a series of fixed points. Decorating clips can be stuck onto wooden and uPVC surfaces, such as door frames, gutters and fascias.
How do you secure Christmas lights to siding?
Clear plastic hooks blend in with the house siding and are the least visible. Hooks made to hang light strings have a flap or catch built in to secure the cord. You can also use hooks that have holes or slots, and attach the light string with a cable tie through the slot on the hook.
How do I keep my Christmas lights from falling down?
You can staple plastic ties to the inside of the eavestroughs or place bent nails or hooks that you can use to keep the string of lights hanging from. If you can’t or do not want to hang them from the eaves you can always use the trim as a backdrop for your Christmas lights.
How do you hang Christmas lights without damaging siding?
Vinyl siding clips can be used to help string up lights across the side of your house without nails or glue. The clips are simply installed under the siding — just slide them in and you’re ready to decorate. After the holidays, lift them right off and your siding will be damage-free.
Is it OK to staple Christmas lights to house?
Not only will staples damage your home, you could also damage the lights. One staple misfire can ruin an entire strand of lights. So, the first rule for safe decorating: Put down the staple gun. There are a variety of plastic clips available that can safely hold your lights to any surface.
How do you put lights on the wall without nails?
Luckily there are a number of alternative ways to hang or display fairy lights. Drawing Pins. Blu-Tack. Wrapping around household objects. Wire Suckers. Damage-free Adhesive Hooks.
How do you attach string lights to siding?
Use Vinyl Hooks These are specially designed plastic hooks that will hold your string lights without needing nails or glue. The design has a top and bottom part with the top slipping underneath the vinyl siding. The siding will then hold the hook in place.
How do you fasten outdoor string lights?
Most commercial-grade patio lights come with clips attached to the top of the bulb socket or the wire above the bulb. If you used a mounting wire, clip the lights onto the wire. Once all lights are up, once again plug the string lights into the exterior outlet or extension cord plugged into an outlet.
What are gutter hooks?
There are several brand names, but they’re all basically the same product: a 12-inch acrylic or metal hook that is designed to hold bird feeders, wind chimes, plants, wind socks, and other objects as they hang down from a home’s gutters.
How do you hang Christmas lights on outdoor siding?
OPTION 1 – Siding Hook This is the most efficient method. Slip the top of the hook underneath a piece of siding and wiggle it until it “snaps” into place. This hooks it onto the bottom of the siding. Then hang your decorations on the bottom of the hook.
How do you hang Christmas lights without nails or staples?
Try using plastic clips instead of nails or staples. Plastic clips are the easiest way for hanging Christmas lights on the roof. You can also use a staple gun to hold them in place, but that will also make them more time consuming to remove after Christmas.
How do you hang lights without drilling holes?
Hanging Outdoor Christmas Lights Without Drilling Holes in Concrete Stucco Gutter Hooks. Gutter hooks allow homeowners to attach Christmas lights securely from all types of drain systems. Magnetic Hooks. A set of industrial magnetic hooks also allows homeowners to avoid drilling into stucco walls. Suction Cup Hooks.
Can I staple string lights?
Leave a little slack at the area closest to the power source and use a staple gun with ¼-in. staples to attach the string lights closest to the power source. Unplug the cord from your outlet. Pull the cord taught, but not tight, and continue stapling the string lights along your path.
Do Christmas light clips ruin shingles?
Lighting manufacturers make clips that slide under the shingle bed. These not only are safe to use on shingles but also elevate the light off the shingle itself so that the heat doesn’t cause warping or other damage to the surface of the shingle.
How do you stick lights to a wall?
Use nails, thumb tacks, or clear wall hooks to hang the lights up. Match the color of the nail or thumb tack to the color of the wire. Drive the nails or thumb tacks between the twisted wires. Never drive them through the wires.
How do you stick decorations without damaging walls?
How to Hang Things without Damaging Your Walls Use hooks with special adhesive. Fine some unique decorative tape. Hang your art on clothespins. Use putty to hang up your favorite works of art. Use a wire display. Use decals as decorations. Use magnetic paint. Heers Management.
Can you screw into vinyl siding?
A stainless steel screw is the very best, but also the most expensive. Vinyl coated screws are great too. No matter which screw you buy, make sure it is a Phillips head screw because they are the easiest to use. Obviously, you want to be safe when climbing ladders to drill into the siding.
What is the best way to hang something on vinyl siding?
The safest and easiest way to hang anything from your vinyl siding is to use siding hooks. The hooks slip into the grooves that are between the adjoining slates. It then clicks into place, allowing you to hook things that are 12 pounds or less. This is a great way to hang up most seasonal decorations on vinyl siding.