Table of Contents
Is Draw-Tite a good brand?
Draw-Tite Hitches – Quality Craftsmanship They also use this advanced technology to fully lab-test their hitches’ performance, structural strength, and safety. Draw-Tite Hitches come in the full range of Class I-V ratings up to 10,000 lbs GTW, so you can find the perfect hitch for your towing needs.
Which is Better Draw-Tite or Curt?
The Curt and Draw-Tite Hitches have the same maximum Gross Trailer Weight, however, the Curt hitch has a larger maximum tongue weight capacity of 525 lbs. compared to Draw-Tite’s 300 lbs. However, you are limited by your vehicle’s tongue weight capacity of 200 lbs. so both will work for your needs.
What does Draw-Tite do?
The Draw-Tite Activator # 5504 is a time-delayed controller. You use the output control to set how much power the brake controller puts out. It does not matter how hard you push the brakes on the truck, it will always send the amount of power to the trailer brakes that you set it to put out.
Are Reese and Draw-Tite the same?
The Reese and Draw-Tite products are manufactured by the same parent company, this means that the # 26102 and # 26002, Dual Cam Sway Control systems are the same, but there is a difference in the generations of the systems.
Are Draw Tite hitches Made in USA?
Are Draw-Tite hitches made in the USA? No, Draw-Tite hitches are NOT made in the USA, but they are designed in the USA. Draw-Tite is owned by parent company Horizon Global; their hitches are manufactured in Mexico.
Where is Draw Tite located?
Currently, Draw-Tite manufactures over 750 different trailer hitches and over 600 accessories and parts covering approximately 3850 vehicle applications. We operate a manufacturing facility totaling 100,000 square feet of state-of-the-art production capabilities in Goshen, Indiana.
Are CURT Hitches good?
The result is a tough, durable hitch that looks great, installs easily, and lasts a lifetime. Curt Hitches are available for just about any vehicle on the road, and each one is custom-designed so it’ll fit perfectly and you most likely won’t even need to do any drilling.
What is a Draw Tite trailer hitch?
Made of solid, all-welded construction for maximum strength and safety, Draw-Tite has an application-specific, custom-fit hitch that will fit your light-duty towing needs. With easy bolt-on installation and top towing performance, you can tow with confidence wherever your adventures take you.
What is the tongue weight on a trailer hitch?
Tongue weight is simply the downward force that the tongue of the trailer exerts on the hitch that is connected to the vehicle. Too little tongue weight can cause the back end of the vehicle to lift which can result in a very dangerous condition known as trailer sway.
What does OL mean on a Draw Tite brake controller?
If the display on your Draw-Tite Activator Brake Controller, part # 5504, shows the letters OL,or Overload Code, that is an indication that there is a short in the Blue wire circuit. The Blue wire supplies power from the controller back to the trailer connector and to the brakes.
Who owns Drawtite hitch?
That’s because the three biggest names in custom trailer hitches-Draw Tite, Hidden Hitch and lesser-known Reese-are all owned by the same company: Cequent Group.
What can you tow with a Class 1 hitch?
Class 1 hitches are rated for 2000 lb trailers with less than 200 lbs of hitch weight – suitable for towing some of the smaller travel trailers or a fold-down camping trailer. On some vehicles with long rear overhangs and/or soft suspensions, even 200 pounds of hitch weight without weight distribution can be too much.
Who owns Curt Manufacturing?
The Eau Claire based CURT Manufacturing has been sold to LCI Industries. Lippert Components, Inc. (LCI) bought the company for $340 million and the sale is expected to close before the end of 2019. CURT makes various products including hitches, towing electricals and cargo management.
What’s the difference between a Class 2 and Class 3 trailer hitch?
Class 2 vs Class 3 Hitch Class 2 hitches have a 1-1/4″ receiver and generally only go up to 3,500 lbs. GTW. On the other hand, class 3 hitches have a 2″ receiver and can range up to 8,000 lbs. gross trailer weight.
What trailer hitches are made in USA?
About CURT: CURT, a CURT Group brand, is the leading manufacturer of USA-made hitches and a complete line towing products. We offer the broadest selection of custom-fit receiver hitches for nearly every vehicle on the road today.
Are Curt hitches made in China?
The Curt trailer hitch balls are all made in China. Many trailer hitch receivers too are made outside the U.S. but Curt does manufacture their hitches stateside.
What kind of steel are trailer hitches made from?
Technical Details Manufacturer Curt Manufacturing Item model number 49060 Is Discontinued By Manufacturer No Exterior Raw Manufacturer Part Number 49060.
Where are hidden hitches made?
Hidden Hitch and Draw-Tite Hitches are manufactured in Mexico by Cequent Performance products. They’ve been around a long time, they make a quality product and they do an excellent job of standing behind their products.
What is a Class III hitch?
Class III hitches used as weight carrying are rated up to 6000 lbs. gross trailer weight (GTW) with a maximum trailer tongue weight (TW) of 600 lbs. Class III hitches used for weight distributing are rated up to 10,000 lbs.
Where are Curt hitches made?
CURT is one of the leading trailer hitch manufacturers in the towing industry. All CURT custom receiver hitches are made in the USA, meaning they are engineered, fabricated, welded, finished, tested and finally shipped out from our headquarters in Eau Claire, Wisconsin.
