QA

Quick Answer: How Far To Space Deck Posts

Layout and Footing Locations Starting with your perimeter, mark the location of each deck post to locate the fitting position. In general, posts should be spaced no more than 8 feet apart. Some builders position them every 4 feet for a completely rigid frame.

How many posts do I need for a 12×16 deck?

A standard deck will need four footings parallel to the house, but they will need to be temporarily braced by 6 inch-by-6 inch posts.

How far apart do deck railing posts need to be?

The structural integrity of the railing depends heavily on the posts that support the rail structure. These posts should be no farther apart than six feet on the flat deck and no farther apart than 5 1/2 feet on stairs. Your local building department might require closer post spacing for added rail strength.

How many footings do I need for a 12×12 deck?

For an attached 12 x 12′ deck, you’ll need at least 3 footings, plus at least 2 more if you’re planning on building stairs with it. If your deck will be a different size, it’s easy to figure out how many you’ll need.

How many joists do I need for a 12×16 deck?

For example, a 12-foot x 12-foot deck of 5/4 x 6 pressure treated wood decking on 16 inches on center spacing of joists will require: A 12-foot long deck with joists 16 inches on center will require 10 joists.

How far apart should 4×4 deck posts be?

For Building a Deck Railing, Deck Frame, or Fence The maximum spacing of 4×4 deck posts should be 6 feet on center, while the maximum spacing of 6×6 deck posts should be 8 feet on center.

How far apart should 4×4 deck railing posts be?

Do not overlook the importance of properly spaced deck post railings in the overall safety of your deck. Standard 4×4-foot deck posts must be spaced no more than 6 feet apart to provide adequate strength.

How far apart should decking posts be UK?

Decking joists should be spaced at 400mm centres. Structural posts should be positioned no more than 1800mm apart.

How do you layout deck footings?

Laying Out Deck Footings Step 1: Mark the Post Center. Step 2: Put in Batterboards. Step 3: Stretch the Line. Step 4: Square the Corners. Step 5: Locate Corner Footings. Step 6: Mark Footing Center.

Where do you place footings on a deck?

Deck footings have to be placed just right so that the posts they support land in the center of each footing. Pay attention to the framing plans. They might not call out the location of the footings, but they will at least show the centerline of the beam and the spacing of the posts.

Is 4×2 OK for decking?

4 x 2 Timber Rail / Joist These decking joists are the most common sized framing timber for decking. They provide a solid structure for fixing your decking boards too. When making your decking frame you should use a 400mm spacing between your timber joists.

Should I use 2×6 or 2×8 for deck?

For upper-level decks, 2×10 is recommended as the minimum size to use for strong guard post connections. 2×6 joists should only be used on ground-level decks that do not require, and will not provide for, any guards. Most decking is not strong enough to support longer spans than 16″.

Can I use 2×8 for deck joists?

2×8 for joists will be fine, with 16″ OC. Should use 2×10 for beams but 2×8 will be fine as well. If you are worried you can triple the 2×8 for the beams but double will be sufficient. You should put the beams at 7 and 14 feet out from the house, with the piers you should do 3 per beam with spacing of 1, 7, 13.

Can you use 4×4 for deck joists?

For most decks, 4×4 lumber is strong enough for structural posts. If a deck is raised more than 6 feet above the ground, codes may require 6×6 posts.

Should deck posts be 4×4 or 6×6?

Deck posts must be a minimum of 4×4 according to the IRC but many jurisdictions require a 6×6 post as a standard. To avoid code violations, many deck builders choose the 6×6 even if the 4×4 is acceptable.

How do you evenly space deck posts?

How to Evenly Space Spindles on Decks Measure the width of the gap between the inner surfaces of the two support posts. Measure the width of a single spindle. Add the two figures together. Count the number of spindles to be used and add one. Divide the sum of the width by the sum of the number of spindles.

How much space do you need between decking joists?

For residential decking, the joist space should not exceed 16 inches as measured on the centre. But if you want a more rigid feel for your decking, you can space the joist by 12 inches on the centre. Additionally, for commercial deckings, the standard joist spacing is 12 inches on the centre.

How far do you space deck joists?

Deck joist spacing should never exceed 16″ on center (with the exception of MAX deck boards, which allow for maximum 24″ on center). For a more rigid feel, 12″ or less may be preferred. If adding additional framing, be sure to keep all boards level and in plane across the tops.

Should deck posts be set in concrete?

A deck post should always be placed on top of footing, not inside concrete because it can break. Concrete tends to absorb moisture and wood expands when it gets wet, so these two factors combined will result in the wood breaking the concrete.

Can I use 4×4 for deck posts?

In the past, many decks were built with 4×4 support posts (also called structural posts). But these can bow seriously, even if a deck is only 3 feet off the ground. For that reason, we strongly recommend that you use 6x6s instead, even if your building department does not demand them.

How many support posts do I need for a deck?

The larger 12-foot side will have a post spacing of 6 feet at a minimum code requirement. That makes a total of eight posts that need to be installed on this average size deck. For aesthetic or symmetry reasons, more posts may be added.