Table of Contents
In perfect drying conditions, 48 hours is enough for the wood to get to where it needs to be before staining. Decks that don’t get much sun should be given an extra day to dry out. If after a day or two the wood still looks wet or there are soft spots, give it more time to dry out.
How do I know if my deck is dry enough to stain?
Three Ways to Know Your Deck is Dry Enough to be Stained One way to clear way to check if the deck is dry enough for staining is by using a moisture meter. A second way to test lumber for dryness is put the edge of the wood into a black garbage bag and leave it in the sunlight for an hour or two.
What happens if you stain a wet deck?
It is not recommended to stain a wet deck. You should remove the old stain before pressure washing the decking to ensure the new one has a good surface to stick to. Staining a wet deck will result in an uneven finish. Try to stain your decking on a dry, warm day.
What happens if you stain a deck before it dries?
But consider this, if you do not let the deck dry sufficiently prior to staining, you can actually trap moisture in the wood underneath the new coat of stain. Then the wood is prone to mold and mildew problems, which can lead to rot and decay.
Can you stain a deck in the evening?
If you stain your deck in the summer, make sure you do it out of the direct sunlight. Applying a deck stain in direct sun will cause the stain to dry to quickly and can result in premature stain failure. In the summer, stain your deck in the morning or evening so the deck surface isn’t too hot.
Can I stain my deck if it rained the night before?
First, ensure the deck is completely dry. Remember, no rain 24 hours before you apply stain and no rain 24 hours after the staining project. Assuming the deck is dry and thirsty for stain, it’s time to make your deck amazing. When applying stain, a pad, brush, roller, or rag can be used to apply the stain.
How long does a deck take to dry?
Average Drying Time As a general rule, 48 hours is sufficient drying time for a newly washed deck. But this also assumes optimal drying conditions, such as a sun-facing deck. If you are on the shadow side of the home where little to no sunlight reaches, wait at least 72 hours before applying any stain or sealer.
Should I pressure wash my deck before staining?
There is a common misconception that just pressure washing a deck prior to staining is all you need to do in order to prep your deck for stain. Pressure washing can help, but if you want your stain to last, using a good deck cleaner and brightener on the deck prior to pressure washing will provide you the best result.
What if it rains 12 hours after staining deck?
It Rained Shortly After Staining my Deck It is best to never stain any exterior wood when inclement weather is forecasted, especially rain. Most deck stain brands will warn against the application of their product within 12-24 hours of rain being forecast. You cannot do much until it stops raining once it starts.
Can you stain a deck over multiple days?
Ultimately you want two set aside at least two days. If you need to power wash your deck or replace any boards it may take you an extra day or two. It is ideal to stain your deck in a season that experiences mild temperatures. Extreme heat or sun can work against you when you are staining your deck.
What is the best temperature for staining deck?
Apply stain only at the proper temperature. For most stains, 70 degrees Fahrenheit is the optimum, with the safety range from 50 to 90 degrees Fahrenheit. Stains do vary, so check the label first. Avoid high humidity and staining on hot surfaces.
Can you use a roller when staining a deck?
You should use a roller brush or sprayer to apply a steady coat of quality stain, such as Olympic Elite stains or Olympic MAXIMUM stains. PRO TIP: Back brushing your stain will help the stain soak into your deck boards, allowing better, long-lasting results.
How long after I stain my deck Can I walk on it?
In most cases a full body stain or acrylic deck finish will be dry to touch within an hour in dry, hot weather. After two hours you could take a chance and walk on it with shoes, though I’d recommend barefoot. After about 4 hours you should be able to safely walk on your deck.
Can I stain deck without sanding?
Do I need to sand the deck before staining? The answer to this is “it depends.” You won’t hurt the deck by applying a light sanding. It really depends on the age of the decking and it’s condition. Sanding is more for the feel of the deck than to prepare it to accept a new stain.
How long does Behr deck stain take to dry before rain?
Coating will resist rain after 4 hours. The surface must be completely dry before application. No primer needed on most woods.
Can you stain decking straight away?
There are many questions as to when a newly installed deck should be stained. Some stain manufacturers suggest you should wait 3-12 months to let the wood dry while others say to stain the deck right away. The answer can be both just as long as you prep the new wood properly for an application of the stain.
