Table of Contents
In most cases a full body stain or acrylic deck finish will be dry to touch within an hour in dry, hot weather. After two hours you could take a chance and walk on it with shoes, though I’d recommend barefoot. After about 4 hours you should be able to safely walk on your deck.
How long before you can walk on a stained deck?
In average conditions, your paint or stain will be dry to the touch within 1-2 hours, but you should not walk on it for probably 4-6 hours. In cooler weather or during periods of high humidity, you will need to wait even longer than this.
How long should a deck dry after staining?
For best results, avoid staining at midday or in direct sunlight. If a second coat is required, wait 4 hours between applications. Depending on temperature and humidity, allow 24 – 48 hours of dry time before using your beautifully restored deck or porch.
How long after staining deck can I put furniture?
I would wait at least 24-48 hours before moving patio furniture back on the deck and returning it to active use.
What happens if it rains on a freshly stained deck?
If it rains within 48 hours after you apply the stain, the water will soak into the wood pores and try to displace the stain. This will result in a splotchy surface rather than an even tone. If it rains right after you apply the stain, the stain will peel and flake off.
How many coats of stain do you put on a deck?
The general rule of thumb is to apply only as much deck stain as the wood can absorb. Typically this will be 2 coats, unless your dealing with extremely dense hardwoods which may only be able to absorb 1 coat of wood stain.
How long does it take for wood stain to cure?
If you use a high-quality exterior wood stain like Olympic Elite stains, it can take a full 24-48 hours to cure, depending on the moisture level within your deck as well as the quality and condition of the wood your deck is made from.
What if it rains 12 hours after staining deck?
It Rained Shortly After Staining my Deck It is best to never stain any exterior wood when inclement weather is forecasted, especially rain. Most deck stain brands will warn against the application of their product within 12-24 hours of rain being forecast. You cannot do much until it stops raining once it starts.
How long does deck stain need to dry before rain?
While latex or water-based stain will be dry in about 4 to 6 hours, your freshly stained deck needs at least 24-48 hours before it rains. Oil-based stains that usually dry in about 12 to 24 hours will require a minimum of 48 hours before the rain.
Can you stain a deck in the evening?
The best time to stain your deck is either the spring or the fall. Applying a deck stain in direct sun will cause the stain to dry to quickly and can result in premature stain failure. In the summer, stain your deck in the morning or evening so the deck surface isn’t too hot.
How long does deck correct take to dry?
Allow to dry 4–6 hours before applying second coat. Requires a 2-coat application.
How long does a stain take to dry?
On average, stains take around 24 to 48 hours to dry. Some brands or stain types may take longer or up to 72 hours. Many factors go into the drying time. Double-check the instructions on the label for the exact dry time.
Can you stain a deck over multiple days?
Ultimately you want two set aside at least two days. If you need to power wash your deck or replace any boards it may take you an extra day or two. It is ideal to stain your deck in a season that experiences mild temperatures. Extreme heat or sun can work against you when you are staining your deck.
How long does it take for TWP stain to dry?
DRY TIME: 24-72 hours depending on drying conditions. Drying conditions will vary greatly depending on applied film thickness and weather conditions. THINNING AND CLEANUP: No thinning required of TWP 100.
Should I use a brush or roller to stain my deck?
You should use a roller brush or sprayer to apply a steady coat of quality stain, such as Olympic Elite stains or Olympic MAXIMUM stains. PRO TIP: Back brushing your stain will help the stain soak into your deck boards, allowing better, long-lasting results.
Can you do a second coat of stain the next day?
Yes. You can apply an additional coat of stain after 24 hours if you want a darker wood color, especially if the first coat takes longer to dry. Just be sure to apply the stain coat the same way you did the first, and wipe off the excess.
What happens if you apply second coat of stain too soon?
If you apply a second, unnecessary coat of stain to wood that is already adequately covered, you risk creating a tacky surface that is prone to early peeling because the second coat is not penetrating the wood surface, but simply laying on top of the first coat of stain.
Why is my stain not drying?
If you applied the stain correctly, and it still remained tacky, it could be due to rainy weather or high humidity. In either case if the tackiness doesn’t go away, wipe the wood down with mineral spirits or naphtha to remove most of the stain, let it dry thoroughly, then try again using a fresh can of stain.
