Summary: How Many bags Of Concrete Per Fence Post? 1 – 4 bags of concrete per fence post are typically what’s needed. This depends on the type of soil, fence design, height, post size and bag weight. In general the depth of the post’s hole needs to be 1/3 to 1/2 of the above ground height of the post.

How many bags of concrete do I need for a post hole?

Most fence post holes will need between 1 – 4 bags of concrete to securely hold the post in place. The best way to determine the size of the hole is: Diameter of the hole is 3 times the width of the fence post. Depth of the hole is one-third to half the above ground height of the fence post.

How much post mix do I need per post?

How much Post Mix do I need for a fence post? The exact amount of Post Mix Concrete needed will vary depending on the width and depth of the hole, but as a general rule you’ll need about one and a third bags for a standard fence post.

How many bags of concrete do I need for a 4×4 post?

How Much Concrete For A 4×4 Fence Post? Depth 50 Lb Bags 10″-14″ 2 16″-22″ 3 24″30″ 4 32″36″ 5.

How big of a hole do I need for a 4×4 post?

The diameter of your post hole should be three times the diameter of your post. So, if you’re planning on using a four-inch round or 4×4-inch square post, your post hole will need to be 12 inches in diameter. For a six-foot-high fence post, we would need a hole that’s 36 inches deep and 12 inches in diameter.

How many posts will 1 bag of Postcrete do?

Just over one bag per hole should be sufficient, blue circle postcrete suggest 1 bag will fill a 8 x 30 inch hole with a 4×4 post.

Is one bag of Postcrete enough for one post?

“Usually one bag of postcrete per post is enough, however you can use a two bags per post if you feel this is needed.

Is 2 feet deep enough for fence posts?

2 feet is the minimum depth that you should dig your fence post holes for. To dig the holes one-third to one-half of the post’s aboveground height, is a general formula. The deeper you dig the holes, the more stability your fence has.

Can you put dry concrete in a post hole?

Fast-setting concrete is ideal for setting posts because there’s no mixing—you simply pour the dry concrete from the bag right into the hole, then add water.

What is the best concrete mix for fence posts?

For a small to mid sized job I recommend going with premixed. The best concrete mix for fence posts I’ve found is Quikrete Fast Setting Concrete Mix in a 50 lb bag. It’s 4000 psi, easy to work with, sets up fast, and doesn’t need to be mixed. Just pour it in the hole and soak with water.

How far apart should fence posts be?

Most fence posts can be spaced 8 to 12 feet apart. While this is a general criteria, it doesn’t cover all scenarios. For instance, high tensile fence can have larger spacing, requiring line posts every 15 to 20 feet for field fence styles, and as much as 20-30 feet for high tensile barbed and smooth wire.

How long will a treated 4×4 post last in the ground?

How Long Will A Treated 4×4 Last In The Ground? (Explained) A treated 4×4 will last 20 to 25 years in the ground if the conditions in the soil and climate are favorable. That number could increase to 40 to 75 years if you install the treated 4×4 in a cement ring rather than the soil.

How deep should an 8 foot post be in the ground?

In general, holes should be at least 3 feet deep for posts that extend 8 feet or more above ground level. Posts that extend 6 feet above ground level should have holes at least 2 1/2 feet deep.

How do I keep my post level while concrete dries?

You need to level it in two directions with a 4-foot level. After getting it straight in the first direction, hold one of the braces against the post and drive a single screw to connect the brace to the post. You can then level and brace the post in the other direction and begin filling the hole.

What is the difference between Postcrete and concrete?

Depending on its application, traditional concrete can take between 24-48 hours and 7 days to set properly and will reach its optimum strength after 25-28 days. Postcrete, on the other hand, is the name given to a post mix concrete, which is a ready to use blend of concrete ingredients that requires no mixing.

How long does it take for Postcrete to fully set?

How long does it take for Postcrete to set? After adding water to the mix, Postcrete usually sets in 5-10 minutes, with the solution beginning to stiffen within 1-2 minutes.

Can you use Postcrete instead of cement?

Postcrete isn’t designed or suitable for general concreting.

How much concrete do I need blue circle?

Blue Circle Multi-Purpose Concrete is available in weatherproof and tear-resistant plastic packaging. One 20 kg bag will typically produce around 0.01 m3 of fresh concrete (0.33m x 0.33m x 0.1m). by machine is preferable with a mixing time of 3-5 minutes.