Table of Contents
The average water pump replacement cost is $550, with prices ranging from $461 to $638 in the US in 2020. But typically depends on the type of vehicle you drive and the auto repair shop you take it to. Labor costs are between $256 and $324 while parts cost between $205 and $314.
Is it worth replacing water pump?
Facts and figures: a working water pump only needs to be replaced after 60,000-100,000 miles, so if you have your car for less than 10 years, you may never have to worry about it. That being said, if you purchase your car used, it is a good idea to find out if the water pump has been replaced.
How many hours does it take to replace a water pump?
On average, water pump replacement is a 3 hour job. You may pay less if you buy the pump yourself and give it to the mechanic to install, though use caution and make sure to buy the parts from a reputable source.
When replacing a water pump What else should you replace?
Generally, the idler pulleys, tensioner and water pump should always be replaced when the timing belt is replaced. In most cases, the timing belt drives the water pump, so it is the right time to replace the water pump. It is also recommended by the manufacturer.
How many years does a water pump last?
The average lifespan of a water pump is similar to the lifespan of a timing belt. They usually last 60,000 to 90,000 miles with the proper care. However, some cheaper water pumps may begin leaking at as low as 30,000 miles.
Should you replace thermostat when replacing water pump?
its a good idea to replace the thermostat whenever replacing a water pump. The thermostat may have suffered some damage during the overheating that occurred before the water pump failed.
How hard is it to replace a water pump?
While removing the pump is not difficult, you must have experience removing and replacing timing belts and their various components. It takes just as much work to get down to the timing belt as it does the water pump, therefore you should plan on replacing the belt at the same time.
How much does it cost to replace a home water pump?
How much does it cost to replace a well pump? The average cost of replacing a well pump is between $900 and $2,500. The cost varies based on the well size, materials used, and installation required. For example, replacing a shallow well pump will cost less than a deep well submersible pump.
How long does it take to fix a water pump in a house?
How long does it take to replace a water pump? Replacing a water pump can be a steady half-day’s work. A simple and straightforward switch might only take 2 hours, but some of the more complicated could take even the most competent mechanic a full day. We’d suggest between 2 and 4 hours for the majority.
Will Stop leak fix a water pump?
It works on plastic, aluminum, and metal radiators in heater cores, engine cooling jacket, gaskets (including head gaskets), water pumps, and freeze plugs.
What items should you recommend when your customer is replacing the water pump?
Other items a customer may need when changing a water pump include gaskets, coolant, a thermostat (recommended if the engine has overheated), and a new OHC timing belt or serpentine belt if the engine has a lot of miles on it and the water pump is driven by the timing belt or serpentine belt.
What causes water pump failure?
The most common water-pump failure is due to worn bearings. Water pumps move a tremendous amount of coolant, and they just simply wear out over time. And mixing coolants, or using the wrong coolant, can cause damage to the water-pump seals and bearings, and can lead to the impeller shaft to fail.
How do you know if your water pump is going bad?
Five Signs Your Water Pump Is Failing Overheating. A dead or dying water pump cannot circulate coolant through your vehicle’s engine and, as such, the engine will overheat. Coolant Leaks. Coolant leaks from the water pump are common and a clear sign that it’s time to replace the pump. Corroded Water Pump. Whining Noises.
Will water pump leak if engine is off?
All cars leak coolant when being turned off after running. it is the way engines release pressure from the hot coolant in the engine when the hot engine is shut off, the pressure from the expansion of the hot coolant is forced out of the radiator, by way of the radiator cap and the return hose.
How long does it take to install a water pump?
The process can take two or three hours or more. If you’re paying a mechanic for the repair, that can lead to an expensive charge for labor. (You can search for the best mechanics in your area with Carfax.) As a result, it’s a good idea to replace your water pump whenever you have your timing belt replaced.
Can you drive a car that needs a water pump?
Heating and cooling may be affected by the vehicle. The car may begin to overheat as well. It is possible to drive your vehicle without a water pump, but not good to. Some people in the racing circuit or who drive racing vehicles purposefully remove their water pumps to obtain more horsepower to their engine.
Is water pump connected to thermostat?
The thermostat is mounted in a housing that is usually attached to the engine near the water pump coolant discharge that flows coolant to the vehicle’s cooling system radiator. At ambient temperature the thermostat is closed.
