Table of Contents
The actual Trex decking boards are available in 1 or 2 inch thick boards. The three main types of boards are the Fascia, Grooved Edge and Square Edge. The Fascia is available in either 8 inch or 12 inch long boards. The boards are 0.75 inches thick and 11.375 inches wide.
How thick is composite decking?
Most manufacturers offer composite decking boards in 12′, 16′ and 20′ lengths. The width varies by brand and style and can range from one to two inches thick and four to six inches wide.
How thick is Trex Select decking?
Also, Trex says, Select decking has a different grain pattern and color than other Trex decking, and comes in a 7/8-inch thickness compared with the 1-inch thickness of its other boards.
What is the standard thickness of decking?
NOTE: Standard boards are often called a 5/4 board when referring to traditional lumber, which means the actual thickness is typically somewhere between 1” and 1 ¼”. Thicker boards are often called a 2 x 6 when referring to traditional lumber, which means the actual thickness is somewhere between 1.2” and 1.5”.
What size are Trex deck boards?
2 x 6 boards available in 12′, 16′, and 20′ lengths.
What is the thickness of a 5 4 board?
5/4 (five-quarter) lumber is 1.25″ thick when rough sawn. When 5/4 lumber is planed, typically it is finished at 1.063″ thick. 6/4 (six-quarter) lumber is 1.5″ thick when rough sawn.
What is the actual thickness of a 5 4 deck board?
Comparing 5/4 Decking With 2×6 Deck Boards, Pros and Cons 2×6 Deck Boards 5/4 Decking Thickness 1 ½” (38mm) 1″ (25mm) Joist Spanning 24″ (600mm) 16″ (400mm) Weight 2.36 lbs (1.07kg) lnft* 1.59 lbs (0.72 kg) lnft* Profile cut Square Cut Rounded Radius Edge.
What is the difference between Trex and composite decking?
Although Trex contains plastic, it’s a composite decking material. As a result, you get the the eye-catching look of rich wood with the durability of a composite. Backed by a 25-year limited warranty, it’s environmentally friendly and designed to remain free of rotting, splitting, splintering, insect damage.
What are the disadvantages of Trex decking?
Cons of Composite Decking A pricey alternative to wood. Durability comes at a cost, as composite decking is more expensive than wood. Composites aren’t natural. Composite decks aren’t completely maintenance free. You’ll need to comparison shop.
What are the three levels of Trex decking?
Trex deck design comes in three types: Select, Enhance, and Transcend.
What is the most common deck board size?
The most common or standard deck board width is 6-inch wide planks based on square-foot coverage, labor, and material cost.
Can I use 1×6 for decking?
Never use 1×6 or 5/4×6 material in close to ground applications. Spacing between boards: You must allow space for your deck boards to expand when they take on moisture, as they will inevitably do when exposed to wet weather, rain or high humidity.
How thick is a 1×6 deck board?
Nominal vs. Actual 1x Lumber 1×6 3/4 x 5-1/2 1×8 3/4 x 7-1/4 1×10 3/4 x 9-1/4 1×12 3/4 x 11-1/4.
How many deck boards do I need for a 10×10 deck?
For a 10×10 square deck, you would therefore need twenty-two 10′ deck boards. Dimensions for deck boards can vary depending on the look you want and the deck board type you use. However, the most common is a 5/4” thick by 6” wide deck board of any length.
Can you have a fire pit on a Trex deck?
The fire pit is not installed on top of the Trex decking. Wood burning fire pits are not recommended on top of Trex decking unless using a product called DeckProtect™. Wood burning fire pits can damage the decking due to the extreme heat from the bottom of the fire pit and/or burning embers “shooting” onto the decking.
Does Trex make 2×6?
Trex® Select 2×6 Lumber Shell covers top and sides (3 sides) 16′ length.
Why do they call it 5 4 decking?
Quarters refer to the thickness of rough-sawn lumber measured in ¼-inch increments. Instead of reading it as a fraction, it should be read as a number of quarters: 5/4 is five quarters, 4/4 is four quarters, etc.
What does 5 quarter mean?
Definition of fifth quarter : the parts of a slaughtered animal other than offal that supplement the four quarters (as the giblets in poultry and the head, tail, hide, horns, hoofs, fat, tallow, tongue, heart, and liver in cattle and sheep).
What is the actual size of a 1×6?
A 1×6, for example, actually measures 3/4″ x 5 1/2″. In this case, the planing is necessary for a smoother surface, so that the board could be used for interior applications. The length of the boards is generally exactly what you order, though we usually only stock pieces of even lengths.
Can I use 2×6 for deck boards?
Wood decking is commonly available in 2×6 and 5/4 x 6 profiles. 5/4 x 6 is produced specifically for decking and is milled with a radius edge or bull nose. 2×6 is thicker and is stronger, but is also more expensive. Spacing between deck boards provide a few critical functions.
How thick is a treated deck board?
CHOOSING THE RIGHT DECKING BOARD THICKNESS Decking Type Actual Thickness (inches) Suggested On Center Joist Spacing (inches) Tropical Hardwoods 1x 13/16” 16” Thermally-Modified 5/4 1” 16” Pressure Treated Pine 5/4 1” 16” Western Red Cedar 5/4 1” 16”.
Are 2×6 good for deck?
2×6 joists should only be used on ground-level decks that do not require, and will not provide for, any guards. Most decking is not strong enough to support longer spans than 16″. Some builders reduce joist spacing to 12″ on center to strengthen the deck frame or to increase maximum allowable joist spans.
Is Trex decking worth the money?
Yes, composite materials on decking and trim are worth the money. The labor to install composite is the same as the labor to install wood, which will rot and require a lot of maintenance. Sun beaming on the wood deck and foot traffic also is very damaging to wood.
Is Trex hot in the sun?
Does Trex decking get hot on a sunny day? Like many other outdoor surfaces, such as concrete, asphalt, beach sand, wood decking, other brands of composite decking, etc., Trex decking can get hot due to weather and sun exposure.
Is there a cheaper alternative to Trex decking?
Generally speaking, Trex and Fiberon offer the least expensive options while TimberTech and AZEK come in on the higher end. However, keep in mind that the higher-tiered grades of Trex are more expensive than the lower-tiered grades of Timbertech so it’s important to make sure you’re comparing apples to apples.
