Table of Contents
To add a thermostat, door lock, or module to your system, complete the following steps: Go to your touchscreen panel and touch the home button. Tap Services. Tap the wrench icon. Enter your 4-digit PIN. Tap Add Devices. At this point, go to the device you want to add (door lock, thermostats, light module, etc.).
How do I add a device to my Vivint panel?
How Do I Add a Device to Vivint? Press the Home button on your Vivint security system’s touchscreen panel. Select Services. Select the Wrench icon. Enter your secret 4-digit pin. Tap Add Devices.
Do Schlage locks work with Vivint?
Technically, Vivint may well work with any Z-Wave enabled lock, but it specifically uses Kwikset Z-based locks. So you may want to try Yale, August, and Schlage Z-Wave enabled locks. But for perfect and easy integration with Vivint, we strongly recommend Kwikset Z-based locks (see our picks above).
How do I connect my Vivint lock to my Yale?
If you own a Yale Assure Lock and want to pair it to the Vivint platform as well, first delete the Assure lock’s wireless connection. Then, put in the lock’s master code and press *, then 7 *, then * 3*. The Vivint panel will then be able to discover and connect to your system.
What is the Vivint installer code?
Enter the default installer PIN code (2203) 3.
What type of door lock does Vivint use?
So here’s the main Smart Lock that Vivint uses — Kwikset SmartCode 888 Deadbolt. With this lock installed, getting in and out of your house is as easy as you can imagine.
How do I fix my vivint lock?
Factory Reset: Remove the battery pack. Press and HOLD the Program button. Re-insert the battery pack (keep holding the Program button for 30 seconds). The lock should beep and the LED will flash red. Release and press the Program button once more. The lock will re-initiate the handing process (extend/retract the bolt).
How do I adjust my vivint lock?
Walk-through for calibrating the deadbolt: Slide the back plate up off of the back of the deadbolt. Remove the battery pack. Wait for 10 seconds. Press and hold the Lock button on the deadbolt keypad. Replace the battery pack. There will be a loud beep. Release the Lock button once the deadbolt motor starts to initiate.
Can I use Vivint door lock without service?
Can I use Vivint without a subscription? You can use Vivint equipment without a subscription, but you wouldn’t have the benefit of professional monitoring, couldn’t access the mobile application, and won’t be able to use the 24/7 technical support service.
Does Kwikset aura work with Vivint?
Kwikset locks integrate with your Vivint system to ensure your entryway—and home—is protected.
Does Z-Wave work with Vivint?
Vivint works well with Z-Wave.
How do I add Z-Wave to Vivint?
At the Vivint panel, press the Home button, then select the three dots in the bottom right-hand corner of the panel. Select Software Version and enter the 4-digit code that appeared in Site Manager after unlocking the Installer Toolbox. Select Smart Home Devices > Z-wave > Add Node.
What is Z-Wave door lock?
Z-Wave Locks Your front door lock is the most utilized entry into your home. Z-Wave offers a variety of home entry solutions by upgrading and replacing outdated wifi or bluetooth smart door locks. Manage your entry codes from any wifi connected device and never worry about leaving the house unlocked.
Why is my keypad door lock not working?
If the keypad buzzes twice after a code is entered and the door fails to unlock, this means the keypad is not communicating with the lock. A reset should fix this issue. If you find that the issue is the lock, try rebooting the lock first. To reboot the lock, remove one battery from the lock and replace it.
What is Vivint master code?
From the home screen of the 2GIG GC2, go to Security > Menu > Toolbox > enter the current master code (the default code is 1111) > User Management.
How do I unlock my Vivint installer toolbox?
Property staff have the ability to unlock a unit’s Installer Toolbox at any time in Site Manager. If troubleshooting requires that you use a PIN, find the unit in Site Manager, select the unit options, and unlock the Installer Toolbox.
Where do I find my Vivint pin?
Go to www.alarm.com, and click Login. Enter the same email and password you use for your Vivint account. Click Users. The PINs will be hidden from view.
How much does a smart lock cost?
The national average cost is between $150 and $400 for an installed smart lock and related accessories, with most homeowners paying $200 for a wifi-enabled smart lock with one accessory.Cost to Install Smart Lock. Smart Lock Cost National average cost $200 Average range $150 – $400 Low-end $100 High-end $1,200.
How does Vivint smart lock work?
Smart locks are keyless door locks that allow you to open your door without a physical key. Many models feature a numeric keypad on the lock for entering a unique access code. A smart lock connects to your home’s WiFi network, which allows it to receive the code or smartphone command to lock or unlock.
How do I change the code on my Vivint door lock?
SkyControl 3.0 – Change Door Lock Code At the home screen, tap the menu icon in the lower right. Tap Users. Enter your 4-digit PIN. Select the user you want to edit. Make sure their Separate lock PIN option is toggled on. Select Lock PIN to add or edit their door lock code.
