Table of Contents
How to Arrange Gas Logs Place the largest ceramic logs on the bottom to serve as the foundation for the fire. Leave 2 inches (5 centimeters) between logs. Make sure none of the logs is blocking the gas flow. Arrange smaller logs on top of the foundation logs.
Can I rearrange logs in gas fireplace?
You may need to adjust your gas fireplace log placement after you’ve arranged the logs. If you realize the flame is burning some of the logs directly, it’s not an immediate safety issue, but you may want to rearrange the logs to prevent soot buildup on them. Your logs won’t last as long if soot builds up.
How do you use ceramic logs?
These logs can be placed in many different types of fireplace spaces. The pipes pump invisible gas through holes in the logs. When the gas logs are ignited, the ceramic logs will produce a steady flame. As propane or natural gas is pumped through the pipes, it burns harmlessly on the surface of the ceramic logs.
Do gas fireplace logs need to be replaced?
Q: Do gas logs require maintenance? A: Gas log sets require no daily maintenance but should be inspected annually by a professional. Logs need to be inspected for cracks and breaks and replaced if they are not in sound condition. Valves, pipes and gas connections should also inspected to ensure they are in good repair.
How do you place rocks in a gas fireplace?
To place the rock wool, grab some tongs and carefully pull small pieces out of the bucket and onto your vermiculite. Your gas logs will lay on your burner pan, so make sure to have the rock wool almost hanging off the edges. This will ensure you can see more “coals” when your fire is burning.
Where do you put rock wool in a gas fireplace?
Do not remove or lift your gas burners when installing glowing embers. Place gas logs in the exact same position they were in beforehand. Insert the glowing embers directly below the fireplace burner. Do not put embers on, between, or above your gas log set.
How do you set up a gas fireplace?
How to install a gas log set in your fireplace Read the installation manual thoroughly. Turn gas off and locate the gas supply stub in the side of the firebox. Connect the gas supply to the burner using a flexible gas line. Place the burner in the proper position in the firebox.
How do you stack decorative logs on a fireplace?
To stack wood in a fireplace: Arrange the kindling in a crisscross formation so that the bits of wood are laid on top of each other while also allowing plenty of space between the bits of wood for airflow. Lay logs in a fireplace overlapping each other.
What is the purpose of ceramic logs?
Refractory ceramic gas logs are made of a mixture of cement and ceramic, which allows them to give off more heat than other types. They tend to last longer and are more durable than other options thanks to their ability to withstand very high temperatures. They can be used in both vented and ventless fireplaces.
Do ceramic logs give off heat?
Providing a beautiful and realistic fire, vented-heater gas logs are made from ceramic fiber that glow and radiate heat.
Can ceramic logs catch fire?
Most are made from a ceramic or a refractory cement (cement made from brick) mixture. They’re fire resistant and are designed to last for years. They can also be installed in traditional wood-burning fireplaces.
What is the lifespan of a gas fireplace?
The normal life expectancy for a gas fireplace varies, but it’s been our experience that most fireplaces need to be replaced somewhere between 15-25 years.
Why are my gas fireplace logs turning black?
Soot buildup is commonly caused by clogged burner ports and improperly positioned fire-logs. Another primary cause of soot is clogged gas burner ports. It creates an unbalanced or incomplete burn, allowing soot to form on the doors and logs. If this happens, you’ll need to clean off the fire-logs and doors.
When should I replace my gas fireplace insert?
When to Replace a Gas Fireplace The fireplace is out of date. It needs significant or constant repair. You also want to replace or update the facing or surround material. You plan to sell your home. You want to use your fireplace more. You want the latest gas hearth features.
How much rock do you put in a gas fire pit?
For your gas fire pit to work the way it was designed you’ll need to get the amount of lava rock you put in the burner tray right. Most gas fire pits need 2-4 inches of lava rock but your situation may be different.
How can I make my gas fireplace look better?
Towards a gas fireplace that looks like a ‘real’ fireplace Step 1 | Install the burner bed on andirons with a grate or in a fire basket. Step 2 | Invest in beautiful ceramic logs. Step 3 | Place a fireback against the back wall of the fireplace. Step 4 | Place antique fireplace accessories around the fireplace.
How many lava rocks do I need?
Simply find the size of the fire pit you have and see how many bags of lava rock you will need to cover the fire pit insert correctly.Square Flat Gas Fire Pit Inserts. Fire Pit Size Number of Lava Rock (657) Needed 24″ 2 Bags 30″ 2 Bags 36″ 6 Bags 42″ 6 Bags.
Where do you put vermiculite in a gas fireplace?
Vermiculite is mostly used for Propane (LP) gas logs.Installation: Fill the burner pan completely with vermiculite. Avoid spilling on the pilot assembly. Do not place vermiculite on other parts of the burner or heat shield. Slope the vermiculite at the same angle as the burner pan to aid in even flame distribution.
How long do ember fibers last?
Embers can last up to five years depending on how frequently you use your fireplace.
What do you put in the bottom of a gas fireplace?
Silica sand is used in the bottom of the burn pan of VENTED NATURAL GAS log sets. The gas is dispursed though the sand spreading it around before it is ignited. This gives you more flame action in your gas logs. Replace the sand every few years to keep your flames dancing.
