Table of Contents
Can you put a hot tub on a wood platform?
You essentially need to double the supports of the deck for it to hold a hot tub. You will need larger lumber and more of it. This all would need to be engineered to your specific project details like how high off the ground, how much total weight, and more.
How do you build a base for a hot tub?
Gravel Base Dig out an area several inches deep and make sure the ground at the bottom is pressed flat. Fill the hole with gravel and press it down to make sure it will not shift or sink once it has weight on it. The gravel will conform to the shape of the bottom of your tub to hold it firmly in place.
How do you support a hot tub on the ground?
Gravel is an excellent choice for a hot tub base. It’s relatively cost-effective and easy to install, plus it’s very good for drainage. This is important because you need to make sure any rain water or overspill from your hot tub is able to drain away from the base. And unlike concrete, gravel won’t crack over time.
What kind of base do you need for a hot tub?
A concrete surface is an excellent base for your hot tub as this material is extremely sturdy and long-lasting. If you have an existing patio made of concrete bricks, make sure it’s in good condition and is level (not angled for drainage). A customized poured concrete pad is an even better choice.
Can you put a hot tub in a shed?
Some sheds are not suitable for hot tubs, such as those not capable of carrying a hot tub’s weight. Normally, hot tubs will need to stand on concrete slabs or other hard floorings in order to function well. Wooden sheds and moisture don’t generally mix, so it’s important to add ventilation so that any steam can escape.
How much weight can a wooden deck hold?
In general, most decks can withstand 100 lbs per square foot. So if a hot tub like the one in the example is under that weight, the average deck should be able to support it.
Will 2×6 hold a hot tub?
What is this? Joist size and spacing for non-hot tub decks commonly are 2x6s spaced on 16” centers. The spacing to support a spa is usually 12” centers and joists may increase to 2x8s or greater.
Can you put a spa on pavers?
Surfaces that suit hot tubs are: Concrete Slab – for spas you require a level base of 100mm (4”) minimum thickness with F72 mesh (subject to soil conditions). Pavers are OK as long as they are flat and are bedded well (concrete base or cement mixed with crusher dust).
Do hot tubs have leveling feet?
If you ever need to move the hot tub, a spa leveler can be relocated and then releveled to the new spot’s contour by simply adjusting the feet again.
What surface can you put a hot tub on?
Outdoor hot tub placement, such as decks, concrete or brick patios, is common. However, the hot tub can be placed on any solid, uniform, level surface. Do not place your hot tub on grass or bare ground.
How much space do you need around a hot tub?
A good rule of thumb for a hot tub is to give yourself about a foot of space on each side of the tub. This leaves room for things like opening the cover. Most covers require at least 18 inches of space behind the tub as well as a few inches on the left and right side for the arm that helps you lift the cover.
How big of a pad do you need for a hot tub?
The spa pad should be at least the size of the spa. If you are going to pour cement pad put a slight slope in it so that water won’t pool under the spa. A 3/4″ slope in a 10 foot wide cement pad is adequate. If you use bricks or patio blocks, they should set on at least a 3″ base of sand, pea gravel or crushed stone.
Can you put a hot tub in a wooden summer house?
It won’t. You’ll need to work with your hot tub and summerhouse company to coordinate delivery (or they can coordinate together if they are really nice). So as long as you make sure one wall can be removed then you will be able to remove a hot tub (and put in a new one) when it comes to the end of it’s life.
Is it safe to put a hot tub in a summer house?
The short answer is yes, you absolutely can! But, before you go rushing out to the nearest hot tub retailer, there are a few things you must consider. With all the will in the world, if your summerhouse isn’t big enough, it’s not going to fit in!Jul 9, 2019.
How heavy is a 6 person hot tub?
There is no single standard hot tub weight. In general, a small two- or three-person hot tub generally weighs around 500 pounds empty and 3,000 pounds when filled with water. A six-person model typically weighs approximately 1,000 pounds empty or 6,000 pounds full.
Do I need to reinforce my deck for a hot tub?
Hot tubs, however, are very heavy, especially when filled with water, and chances are that your existing deck can’t safely support it without additional reinforcement. Fortunately, reinforcing your deck in preparation for a hot tub is a relatively easy task.
How far can a 2×6 span without support?
A 2×6 can support up to 50 pounds per square foot of weight without sagging with a maximum span of about 12 feet when spanning a distance horizontally, with the 2×6 standing in a vertical position. This number includes both live and dead weight.
Will a hot tub work with a 2×10?
A new platform with large footings at least 22″ in diameter should be installed below each corner of the tub to evenly distribute the weight. Use substantial framing materials such as 2×10 or 2×12 joists installed 12″ on center with nailed double beams. Use 6×6 support posts with bracing if necessary.
Can 2×4 be used as deck joist?
The short answer is yes. 2x4s can work for deck joists. However, they aren’t ideal for spanning long distances without bending or breaking, so you have some limitations. Choosing 2x4s for a low-sitting deck is perfect for keeping your feet out of the mud.
