Quick Answer: How To Change Oil On Harley

How often should you change oil in Harley-Davidson?

While some may recommend having different intervals for all 3 components, we like to change the oil in all 3 every time we do a change, which is typically every 3000-4000 miles. Consult your owner’s manual for recommended numbers, but the fresher you keep the oil, the better the bike will run.

Should I warm up my Harley before changing oil?

Before you begin, it’s a good idea to start your engine and let it run for a bit. This will warm up the oil so it flows easily when you’re ready to drain it.

How much is an oil change on a Harley?

Service Pricing Menu INSPECTION PRICE* Multi Point Inspection [FREE with any service] OIL & FILTER CHANGE PRICE* Street [black filter only] $99.95 Sportster $99.95.

Should I run synthetic oil in my Harley?

The best lubricant for your precious Harley Davidson Twin Cam engine is synthetic oil. There are other options, too, such as mineral and semi-synthetic. But you should choose synthetic oil for the best results. Synthetic oil has a higher viscosity index, lower friction and a lower Noack value.

What kind of fluid goes in a Harley primary?

You actually have a couple of choices for the primary drive. The optimum product would be Mobil 1 Racing™ 4T 10W-40 motorcycle oil, but it is also okay to use Mobil 1™ V-Twin 20W-50.

How do you know if motorcycle oil is bad?

What are the signs my motorcycle needs an oil change? Black or gritty oil. Check engine/oil light is on. Can’t remember the last time you did it. Blueish exhaust. Oil level is constantly too low or below the minimum mark. Increased engine noise. Your “new” oil was past its expiration date.

Does motorcycle oil go bad?

Under optimal conditions (stored in the original, unopened containers at moderate temperatures), motor oil usually remains stable for an extended period of time. That said, an engine oil’s properties are best if it is used within two years. After that, we recommend replacing the oil.

How long does Harley oil last?

Motorcycles needing semi-synthetic motor oil can usually last between 5,000-8,000 miles before needing to change the oil. Finally, motorcycle engines running off fully synthetic motor oil will be able to last between 7,000-10,000 miles before needing to change the oil.

Should you run your motorcycle before changing oil?

It’s not absolutely necessary, however , warm oil is less viscous and so drains more easily making the oil change easier and far quicker than from a ‘cold’ engine. Probably best to warm is up mildly so the oil is less viscous but not hot enough to burn you if it splashes on you ( which it may well do!).

Should I run my bike before oil change?

Just make sure the ignition is immobilized, if there’s any chance your nosy neighbor might come over and decide this would be a fun time to start up the bike — or so you don’t forget and start the bike without oil in it.

Do you check motorcycle engine oil hot or cold?

Tips to help check your engine oil Always wipe the dipstick with a lint/fluff-free material upon removal and then check the oil level. Never place the dipstick on dirty ground where it could pick up grit. Never check engine oil level with a hot engine unless the manufacturer states this is the case.

Is Harley Davidson maintenance expensive?

Harley-Davidson recommends periodic servicing every 5,000 miles, meaning you’ll have four scheduled servicing appointments. If the average 5,000-mile service for a Harley motorcycle costs $400 on average, your annual maintenance costs will be $1600.

How often should a Harley be serviced?

Harley-Davidson® recommends that your motorcycle receive servicing at least every five thousand miles, depending upon rider, riding style and conditions. Sometimes more frequent oil changes can be warranted.

How many quarts of oil does a Harley take?

Using a funnel, fill the oil to the proper level. You should need about three quarts.

What oil does Harley use from the factory?

Motorcycles with a Twin Cam 103 engine are shipped from the factory with GENUINE HARLEY-DAVIDSON H-D 360 MOTORCYCLE OIL 20W50. For these motorcycles, H-D 360 is the preferred oil under normal operation conditions.

When should I use 20W50 oil?

What Is 20W-50 Oil Used For? 20W-50 is a common motor oil used in moderate-to-large diesel and gasoline engines, high-performance motorcycle bikes, and aviation vehicles. Its resistance to thinning at high heat also makes it popular as a racing oil and high temperature driving.

How often should I change transmission fluid in my Harley?

How often should I change the tranny oil in my Harley? According to the manufacturer’s service manual, you should change the engine oil at 5,000 miles. Primary oil should change at 10,000 miles, and trans fluid at 20,000 miles. A transmission oil change should happen every year.

Is Harley primary oil the same as engine oil?

Many motorcycles including V-twin motorcycles, like modern Indian* and Victory* bikes, use a shared sump, meaning they use the same lubricant in the engine, transmission and primary chaincase. Most Harley-Davidson* motorcycles, however, use a separate sump for each lubricant.