QA

How To Clean Your K&N Air Filter

Can I clean my K&N air filter with soap and water?

To clean them you can use any soap the will dissolve oil(Dawn soap works well). Just make sure the dirty water doesn’t get on the inside of the filter. Don’t brush! gently agitate the soapy water and let soap do it work.

How often should I clean a K&N air filter?

The general rule of thumb is that the filter needs to be cleaned when the dirt build up gets as thick as the wire mesh. The usual interval is 30,000 – 50,000 miles depending on driving conditions. We recommend that you check your filter about once a year in normal usage.

Can I clean my K&N air filter with WD40?

The question this article wants to answer is, could you use WD40 to re-oil your K&N air filter? (or any other oil-based performance filters). Quick answer – no, you should not use WD-40 to oil your air filter because they dry up too quickly and leave behind residue that could even block airflow.

What oil can I use on K&N filter?

What type of oil can you use with a K&N filter? K&N® oil filters are compatible with conventional, synthetic, and blended motor oils. K&N now offers premium full synthetic motor oil to pair with your oil filter for the ultimate filtration combination.

Can I use degreaser to clean K&N air filter?

The degreaser should be applied liberally to the filter. Warm soap water is a good way to use it. It’s okay to scrub it with your hand or a plastic bristle brush.

Do you oil both sides of K&N filter?

When using the air filter oil squeeze bottle found in K&N® filter cleaning kit 99-5050, apply K&N air filter oil evenly along the crown of each pleat. Allow the oil to wick for approximately 20 minutes, and then touch up any light areas on either side of filter until there is a uniform red color on all areas.

How do I know when my K&N filter needs cleaning?

K&N recommends that you visually inspect your air filter once every 25,000 miles to determine if it needs to be cleaned. Cleaning your K&N Air Filter is not required if you can still see the wire screen on the entire air filter, regardless of how dirty it may appear.

Do K&N filters damage engines?

K&N filters will not damage the engine internals but they can damage or at least coat the Mass Air Flow sensor if your car has one and most cars now do. The oil that the K&N filter is soaked in can separate and contaminate the wires of the MAF.

Can you clean an air filter with alcohol?

(4) Alcohol. Isopropyl alcohol is commonly used to help the oil penetrate into the pores of the filter better. It thins out the oil, making it watery and easy to apply. But, it must be given ample time to evaporate before the filter is used. Otherwise, the oil will get sucked into the intake or even catch fire.

Should you oil your air filter?

Remember to liberally apply oil to the filter. The oil’s purpose is to prevent dirt and debris from passing through. Failing to use enough oil is counterproductive to the filter’s job. Make you’re using application specific cleaner and oil for your air filters.

What kind of foam is used for air filter?

Foam filters are air cleaner filters that use polyurethane foam elements as the filtering material to trap unwanted air contaminants and particulates. Foam filters are made up of tiny interlocking cells that prevent the passage of dirt particles and distribute these throughout the entire volume of the foam.

What is K&N cleaner?

K&N Air Filter Cleaner is the only cleaner recommended to clean K&N cotton air filter elements. K&N Power Kleen works to dissolve the dirt build up and old filter oil, and can be washed away with water. The use of other cleaning solutions can void the air filter’s warranty.

What happens if I don’t oil my K&N filter?

K&N filter elements have larger holes than stock air filters to allow more air through. The trade off is that without the oil, those larger holes would let in more dust type particles which, as anyone who knows engines will tell you, is not good for the engine.

What happens if you over oil a K&N air filter?

Yes, you can over-oil a cotton/gauze type filter. Usually what happens from this is that the filter oil will foul the MAF sensor.

How long does K&N oil filter last?

HOW DO YOU KNOW WHEN IT’S TIME TO CHANGE YOUR OIL FILTER? K&N premium oil filters are built to withstand the long intervals between service changes, which are often around 10,000 miles for newer vehicles.

Are all K&N air filters washable?

K&N replacement automotive air filter products are available for most cars, trucks, motorcycles, ATV’s, and other vehicles. Unlike disposable filters, which require frequent replacement, K&N air filters are washable, reusable, and engineered to last for the life of your vehicle.