Table of Contents
How do I connect Bluetooth art sounds?
Quick press the [Multi] button on either earbud. After a moment, the LED indicators will slowly flash BLUE and the two earbuds will re-pair to each other. pause media playback. telephone contact number, and the defective unit within the package.
How do I connect Bluetooth headphones to pairing mode?
Activate Pairing mode on the Bluetooth headphones. Press and hold the Power button or the ID SET button, as shown in the illustration below. When the indicator starts to blink quickly, release the button. The blinking means the Bluetooth headphones have entered Pairing mode.
How do you connect Bluetooth headphones to audio?
Enable media audio If you’re getting no sound out of your Bluetooth headphones, make sure that the Media Audio setting is turned on. With your Bluetooth headphones connected, go to Settings, and click Bluetooth. Select your Bluetooth headphones from the list. On the next screen, make sure that Media Audio is turned ON.
How do I charge my art speaker Bluetooth?
Connect an external USB device (5V,2A) to this port in order to charge your device. NOTE: this USB port is intended for charging only. In order to charge an external device, the device has to be turned on.
How do I reset my art sound?
Pause and then play your audio source, as your wireless network may have had issues affecting all of your devices. Perform a factory reset. Hold the Setup and Party Mode buttons on the speaker at the same time for 3 seconds. The LED will turn red.
Why is my Bluetooth not pairing?
For Android phones, go to Settings > System > Advanced> Reset Options > Reset Wi-fi, mobile & Bluetooth. For iOS and iPadOS device, you’ll have to unpair all of your devices (go to Setting > Bluetooth, select the info icon and and choose Forget This Device for each device) then restart your phone or tablet.
Why does my iPhone not find Bluetooth devices?
You should first make sure Bluetooth is turned on and try connecting your device in the Bluetooth settings. If your iPhone still won’t connect to Bluetooth, you can try deleting other devices from Bluetooth settings, updating your iOS software, resetting your network settings, or restarting your iPhone entirely.
Why my Bluetooth earphone is not working?
If your Bluetooth devices won’t connect, it’s likely because the devices are out of range, or aren’t in pairing mode. If you’re having persistent Bluetooth connection problems, try resetting your devices, or having your phone or tablet “forget” the connection. Visit Business Insider’s homepage for more stories.
Why is my phone not playing sound through headphones?
Try this: Go to Settings >> Sounds >> Vibration. Tap on Volume and similar settings to make sure your sound settings are turned on. Note: Several companies make Android smartphones, so the steps to correct your sound may be slightly different.
Why is my Bluetooth connected but no sound?
Make sure that the speaker has a BLUETOOTH connection with the BLUETOOTH device. Pair the speaker with the BLUETOOTH device again. The volume of the speaker or BLUETOOTH device may be low. If a cord is connected to the AUDIO IN jack of the speaker or to the BLUETOOTH device, unplug it.
How do I connect wireless Bluetooth headphones to my phone?
How to Connect Bluetooth Headphones to Android Phone First Open Settings. Next, tap Connections. Then tap Bluetooth. Then tap Scan at the top-right corner of your screen. Next, press and hold the power button on your headphones. Finally, find your headphones and tap them.
Why are my TWS won’t pair?
Step 1: Delete the left and right earbuds pairing information (Reset the i12 TWS). In pairing mode, 5 click the power button until LED lit RED. Step 2: Long press the function key for 5 seconds to turn on the i12 TWS. Step 3: Enter pairing mode, pairing time is about 5 seconds, prompt tone “pairing mode”.
How do I pair my art speaker?
To pair your Bluetooth-enabled device with the speaker: Make sure your device’s Bluetooth is turned on. If the speaker isn’t already on, press and hold the button for 3 seconds to turn it on. Press and hold for 3 seconds the Pair button to enter pairing mode. Open the Bluetooth settings menu on your device.
How do you reset Bluetooth earbuds?
Turn off Bluetooth setting on your device. With the earbuds still in the charging case, hold down buttons on both earbuds for around 10 seconds. The LEDs will blink Red and White 3 times. This will reset your earbuds.
How do I connect my Bluetooth speaker to my phone?
Step 1: Put the speaker in pairing mode. Switch on the speaker and long press the Bluetooth button on the device. Step 2: Switch on Bluetooth on mobile phone. Go to settings in your phone (both Android and iOS) and select the Bluetooth settings option. Step 3: Wait for the phone to connect.
How do I get my iPhone to recognize my headphones?
For iPhones Running iOS 11 Or Newer Then, press and hold the audio box in the upper right-hand corner of Control Center. Next, tap the AirPlay icon and make sure there’s a check mark next to Headphones. If the check mark is next to a different device, you can switch to headphones by tapping on Headphones.
How do I connect Bluetooth headphones to my iPhone?
Bluetooth Headsets: How to Pair with an iPhone On your iPhone, press Settings > General > Bluetooth. If Bluetooth is turned Off, tap to turn it On. Place your Bluetooth headset into pairing mode. When you see your Plantronics device name, tap it to pair and connect.
Why is there no sound coming from my Bluetooth headphones Iphone?
You may find that Media Audio has been switched off for your headphones. This is how to check this setting: Open the [Settings] App on your device. Ensure the toggle for [Media Audio] is switched on.
