Table of Contents
How do you connect earbuds to art and sound?
Quick press the [Multi] button on either earbud. After a moment, the LED indicators will slowly flash BLUE and the two earbuds will re-pair to each other.
How do you connect wireless headphones?
How to Connect Bluetooth Headphones to Android Phone First Open Settings. Next, tap Connections. Then tap Bluetooth. Then tap Scan at the top-right corner of your screen. Next, press and hold the power button on your headphones. Finally, find your headphones and tap them.
How do you put earbuds in pairing mode?
In the Bluetooth menu, you want to make sure that Bluetooth is turned on. Then go to your headphones or earphones and press the Bluetooth pairing button. If you’re not sure which button that is, your manual will tell you if there’s a dedicated Bluetooth button or if the power button doubles as the Bluetooth button.
How do I connect my Bluetooth speaker to my art and sound?
To pair your Bluetooth-enabled device with the speaker: Make sure your device’s Bluetooth is turned on. If the speaker isn’t already on, press and hold the button for 3 seconds to turn it on. Press and hold for 3 seconds the Pair button to enter pairing mode. Open the Bluetooth settings menu on your device.
How do you pair headphones with Iphone?
Pair your device with a Bluetooth accessory On your device, go to Settings > Bluetooth and turn on Bluetooth. Place your accessory in discovery mode and wait for it to appear on your device. To pair, tap your accessory name when it appears onscreen.
How do you use headphones?
Pull on your earlobe with the other hand to create enough space to gently push the ear tip inside your ear canal. For most over-the-ear in-ear headphones, the lower end of the headphone driver (the part that connects the cable to the driver) should be facing upwards when worn inside the ear.
Why are my Bluetooth headphones not connecting?
For Android phones, go to Settings > System > Advanced> Reset Options > Reset Wi-fi, mobile & Bluetooth. For iOS and iPadOS device, you’ll have to unpair all of your devices (go to Setting > Bluetooth, select the info icon and and choose Forget This Device for each device) then restart your phone or tablet.
How do you pair TWS earbuds?
Enable the bluetooth pairing mode on your phone device. Tap on “Air plus” to connect. Right earphone will response with a voice prompt: “CONNECTED”and blue light flash when connected successfully. When power on,the earphones will connect the last paired mobile automatically.
Why are my TWS won’t pair?
Step 1: Delete the left and right earbuds pairing information (Reset the i12 TWS). In pairing mode, 5 click the power button until LED lit RED. Step 2: Long press the function key for 5 seconds to turn on the i12 TWS. Step 3: Enter pairing mode, pairing time is about 5 seconds, prompt tone “pairing mode”.
How do you charge a art sound speaker?
Connect an external USB device (5V,2A) to this port in order to charge your device. NOTE: this USB port is intended for charging only. In order to charge an external device, the device has to be turned on.
How do I reset my art sound?
Pause and then play your audio source, as your wireless network may have had issues affecting all of your devices. Perform a factory reset. Hold the Setup and Party Mode buttons on the speaker at the same time for 3 seconds. The LED will turn red.
Why won’t my iPhone find my headphones?
Make sure that your Bluetooth accessory and iOS or iPadOS device are close to each other. Turn your Bluetooth accessory off and back on again. Make sure that your Bluetooth accessory is on and fully charged or connected to power. If your accessory uses batteries, see if they need to be replaced.
Why won’t my headphones connect?
On Android, tap the Settings cog next to a paired device and choose Unpair (or Forget, as it’s labeled on some phones). Recharge the battery. Try plugging them in and charging them fully before pairing, even if they say they have some battery left. Make sure both devices are compatible.
How do you use Bluetooth earphones?
Step 1: Put your earphones in the pairing mode. The initial step is to put your earphones in pairing mode. Step 2: Go to Settings – Bluetooth on your phone. Step 3: Scan for new devices under the Bluetooth category. Step 4: Select your device and connect. Step 5: Play your favorite music.
How do I force a Bluetooth device to pair?
Go to settings, Bluetooth, and find your speaker (There should be a list of Bluetooth devices that you last connected to). Tap on the Bluetooth speaker to connect, then turn the speaker on AFTER you pressed the connect button, while your device is trying to connect to it.
How do I turn on TWS headphones?
Press and hold the power/pairing button on each earphone for up to 2-3 seconds to turn them on. You will hear a voice prompt with “Power On”.
How do you use TWS headphones?
How do I Pair TWS Bluetooth Headphones with my Cell Phone? Make sure that your phone has the Bluetooth turned on. Your phone and earbuds should be within 3ft (1m) of each other. Turn your earbuds on and search for new devices in your phones Bluetooth settings. You’re connected and ready to listen to music!.
Can’t connect both earbuds?
Step 1: While the headphones are charging (the white LED indicator of earbuds is on), double-press the power keys of both sides to reset the headphones. Remove both the headphones from charging case, then both headphones power on automatically and connect each other within 60 seconds.
How do I reset my TWS earbuds?
From OFF status, press & hold the power button for about 15 seconds, LED will light on BLUE once then no LED light for about 7-10 seconds, at last it will flash BLUE & RED simultaneously (looks PINK) twice. Then it will power off along with the LED turns off. Step 3: Pair both RIGHT and LEFT earbuds.
How do you charge Bluetooth earphones?
How to charge Bluetooth headset？ Use a suitable charger. Generally, Bluetooth headsets have dedicated chargers. Insert all the plugs when charging. Charge on the base or charging box. Charge your Bluetooth headset. Don’t use the headset when charging.
Is it OK to use Bluetooth headphones while charging?
Headsets cannot be used while charging. The Bluetooth headset uses a lithium ion, rechargeable, non-replaceable battery. Under normal use, the expected life of the battery is approximately 400 charges.
