Table of Contents
Prepare the Floor for Refinishing. Take the following steps before wood floor refinishing. Pull Up the Shoe Base Moulding. Rough-Sand the Floor. Sand the Edges and Corners. Screen Sand the Floor. Remove All Dust. Apply the Wood Stain. Apply the Finish.
Can I refinish hardwood floors myself?
If you only have some minor scratches and dings or a dull finish, you might be able to simply buff and add a new coat of varnish. But, even if your floors need a complete makeover, refinishing hardwood is a very manageable and rewarding do-it-yourself job that can save a lot of money.
What are the steps to refinishing hardwood floors?
Your 9 Step Guide to Refinishing Hardwood Floors Step 1: Remove the Shoe Base Molding. Step 2: Fixing the Squeaks and Creeks. Step 3: Sand the Floors. Step 4: Sweep and Vacuum Between Sands. Step 5: Edges and Corners. Step 6: Screen Sand. Step 7: Dust Removal. Step 8: Staining Your Hardwood Floors.
Can I sand and refinish my hardwood floors myself?
If the scratches don’t go all the way through to the wood, you can scuff-sand your floors with a buffer and apply a fresh coat or two of finish. The hardwood floor refinishing process is easier and less expensive than sanding down to bare wood and takes less time. In a few hours, your floors will look as good as new.
What is the difference between refinishing and resurfacing wood floors?
Refinishing involves sanding down the uppermost layer of the floor and applying fresh stain and lacquer over the existing wood. Resurfacing your floor involves more than just putting a layer of polish on top.
What is the cheapest way to refinish hardwood floors?
Applying a revitalizer gloss is the simplest and cheapest way to refinish hardwood floors. This approach works best on floors that only have surface-level scratches and other minor wear and tear issues. You can get the job done without the need for equipment rentals or hard-to-find materials.
What grit sandpaper do you use to refinish hardwood floors?
Start with 36-grit sandpaper for a floor that hasn’t been sanded in a long time or that has a lot of heavy finish on it. Floors that have been painted may even require you to go tougher and use 24 or 16-grit paper. Maple floors are so hard that they often require 36-grit sandpaper as well.
Is it cheaper to sand and refinish hardwood floors?
In general, it will almost ALWAYS be less expensive to refinish your hardwood floors. If you replace them, you need to pay for additional wood as well as ripping up and hauling away existing hardwood. Even if you have this, it will still be less expensive then replacing the whole floor.
How much does it cost to refinish $1000 square feet of hardwood floors?
The cost to refinish 1,000 square feet of hardwood flooring averages between $3,000 to $8,000.
How do you tell if your hardwood floors can be refinished?
Water Test Pour a spoonful of water onto the floor. If it forms droplets that stay on the surface of the wood, the floor finish is still good. If the water is slowly absorbed into the wood, the finish is worn and needs to be restored.
How do you restore hardwood floors without sanding?
3 Approaches to Refinishing Hardwood Floors Without Sanding Use a store-bought chemical abrasion kit. Buff and recoat floors with polyurethane. Use a revitalizer.
How many coats of stain do I need for hardwood floors?
How many coats will be applied? The standard for a hardwood floor is at least three coats. This consists of one seal coat (which may be the stain) and two coats of finish. Additional costs of finish may be applied depending on the need.
What is the best time of year to refinish hardwood floors?
If you are in the market to have your hardwood floors refinished this summer, then you might want to consider having it done while you are on vacation.
How often do wood floors need to be refinished?
A solid hardwood plank at least 3/4 inches thick will likely need to be refinished four to six times during its total lifespan. It’s commonly accepted that you refinish every seven to ten years. Important note: some hardwood is only 1/4 inches thick. In this case, a refinish could strip away all traces of the floor.
How long do refinished hardwood floors last?
How long will my new finish last? On average, a hardwood flooring finish lasts approximately ten years.
Can you refinish floors in one day?
A screen and re-coat is a one-day process that doesn’t give you a blank slate like a full sand and refinish, but it DOES give your hardwood floors a fantastic refresh. The process is dustless (as is our full sand and refinish, by the way), and takes ONE DAY to complete.
How can I refinish my hardwood floors in one day?
Refinish Hardwood Floors in One Day: How to Refinish Wood Floors Step by Step Step 1: Buy special hardwood floor refinishing kit. Refinishing kit and other tools. Step 2: Clear the floor and clean the room. Step 3: “Sand” the floor with liquid. Step 4: Damp mop and touch up the floor. Step 5: Apply the new finish…fast!.
Can you refinish hardwood floors without removing baseboards?
Installing hardwood floors without removing the baseboards is possible, and it’s a suitable option for other types of flooring as well. If your baseboards have been glued to the wall and would cause damage if you tried to remove them, it may be best to leave them.
