How To Fix A Kenmore Refrigerator

How do you fix a Kenmore refrigerator that is not cooling?

Check the condenser coils to determine if they are dirty—if the condenser coils are dirty, clean them. The condenser fan motor draws air though the condenser coils and over the compressor. If the condenser fan motor is not working properly, the refrigerator won’t cool properly.

Why is my Kenmore refrigerator not cold enough?

If the refrigerator is not cold enough there might be something caught in the condenser fan motor blade, or the condenser fan motor might be defective. The condenser fan motor draws air over the condenser coils to cool them. The condenser fan motor is located underneath the refrigerator near the back.

How do I reset my Kenmore refrigerator?

Open one refrigerator door and press the “Ultra Ice” and “Home” buttons simultaneously for five seconds to turn off the refrigerator’s controls. Unplug the refrigerator’s power cord from the wall outlet. Reconnect the power cord to the wall outlet. The refrigerator is now reset.

Why is my refrigerator running but not cooling?

The most common reason why a refrigerator is not cooling is a problem with the evaporator coils. Over time, evaporator coils can become covered with ice, which prevents the coils from working properly. If the coils are covered in ice, the ice will need to be defrosted to fix the problem.

Why is my Kenmore fridge not cooling but freezer works?

Check the evaporator coils to determine if they are frosted over. If the evaporator fan is not working, the freezer or refrigerator will not cool adequately. To determine if the evaporator fan motor is defective, try turning the fan blade by hand. If the fan blade does not turn freely, replace the fan motor.

How do you fix a refrigerator that is not cooling?

Fridge Still Not Cooling? Follow These Steps to Diagnose & Fix it Condenser coils are dusty. There are coils located under or behind the fridge that cool and condense the refrigerant. The condenser fan is broken. The evaporator fan is broken. Evaporator coils are covered in frost. Air inlet damper is broken.

How do you put a Kenmore refrigerator in diagnostic mode?

Enter the diagnostic mode by pressing and holding the Lock button for 3 seconds, then press and hold the Freezer and Refrigerator buttons while pressing the Acela Ice button 5 times. The digital display will show operating time (number of minutes it’s been plugged in).

How do you clean the coils on a Kenmore refrigerator?

Steps To Clean Kenmore Refrigerator Coils Step 1: Unplug the Refrigerator at The Wall. Step 2: Pull Your Kenmore Refrigerator from the Wall to Access the Fridge Coils Located at The Back. Step 3: Unclamp the Fridge Bottom Panel if Coils are Not at the Back. Step 4: Remove the Dust Using a Soft-Bristled Brush.

Where is the reset button?

Alternatively referred to as the reset switch, the reset button allows devices that utilize it, such as a computer or peripheral to be rebooted. Usually, the button is on the front of the device, next to or near the power button.

How do I reset my Kenmore refrigerator compressor?

4 steps to reset a refrigerator compressor Unplug your refrigerator. Turn off the refrigerator and freezer from the control panel. Reset your freezer and fridge temperature settings. Wait for the refrigerator temperature to stabilize.

Does my Kenmore freezer have a reset button?

Another way you can reset certain Kenmore freezers is by pressing and holding the UP arrow button until the display finally starts showing 10 digits on the display. You will then need to press the Alarm reset button.

Why is my fridge not cold but freezer is?

When the fridge is not cold but the freezer is, the problem is probably tied to one of your refrigerator’s mechanisms not working as designed. A small fan and motor are mounted near the evaporator, helping draw air over the coils and circulate it to the fridge and freezer.

What is the first thing to check when refrigerator stops working?

If Your Fridge Has Stopped and the Light is Off As obvious as this sounds, often a fridge shuts down completely because it’s simply getting no power. The first thing to check is the breaker (in your home’s electrical service panel) of the circuit serving the fridge.

Why has my fridge gone warm?

Refrigerator Is Too Full If there are too many items in your fresh food compartment, that cold air may not circulate properly, resulting in a refrigerator that’s warm. It’s fairly common for a refrigerator to feel warm if it’s overstuffed, and this problem is obviously easy to resolve.