Table of Contents
How do I reset my Maytag washer?
The easiest way to reset a Maytag washer is to disconnect the power to the washing machine for three minutes. Disconnecting the power allows the electrical charge to dissipate from the washing machine, which allows it to reset. If the reset fails, unplug the washer again, this time leaving it unplugged for ten minutes.
How do you fix a Maytag washer that won’t start?
1. Check Power Connection Perform a Maytag washer reset: Try unplugging the washer for 1 minute before plugging it back in to see if power is restored. Power cord: Make sure the power cord is free of damage and completely plugged into a working outlet.
What is wrong with my Maytag washer?
Some common Maytag front-load washer problems include not agitating or spinning, and not draining or filling with water. Perhaps your washing machine is vibrating during spin cycles or making noises during wash cycles. Look, Maytag is a great brand, but if the washer isn’t working that doesn’t work for anybody.
Why is my Maytag washer not draining or spinning?
A top load Maytag washer not draining may have a defective lid switch assembly. On top-loading washers, draining and spinning will only occur if the lid is properly closed and activates the switch. Try depressing the lid switch with your finger to see if the machine drains and spins.
How do you diagnose a washing machine problem?
Washer Troubleshooting Guide Check that the washer is plugged in securely. Check the circuit breaker or fuse box. Test the outlet for current. Check that the water supply valves are turned on. Inspect the filter screens. Test for overheating. Test the water level switch. Test the timer control.
What’s wrong with a washer when it won’t spin?
Normally, your washing machine won’t go into a spin cycle until it’s been drained. The drainage hose may become clogged with debris from your clothing, or it could be kinked. If the hose is kinked or crushed, it will likely need to be replaced.
Why does my Maytag washer have no power?
Check to see if a household circuit breaker or Ground Fault Circuit Interrupter (GFCI) outlet has tripped. If so, reset the circuit breaker or Ground Fault Circuit Interrupter. If the washer is on a fuse box, check to see if a fuse has blown and replaced it, if necessary.
Why won’t my Maytag washer drain?
Drain Hose Is Obstructed An obstructed drain hose is one of the most common reasons a Maytag washer won’t drain. Both kinks and blockages can obstruct the hose, preventing proper draining. However, if your washing machine is leaking, the kink may have damaged the hose, necessitating replacement.
How do I get my Maytag washer to spin only?
Power on the washer. Don’t select or move the main timer knob. Push spin speed button, select speed and push start. That should be a spin only cycle.
What causes a washing machine to stop working?
There are a few possible reasons for this: – The locking mechanism could have jammed (maybe some clothes have gotten in the way). – There could be a glitch in the washer’s computer. – The washing machine may not be draining properly, leaving the washer door locked and the drum filled with water.
How many years should a washing machine last?
How long does a washing machine last? A typical washer should last 10-13 years. Top-loading washers typically last a few years longer than their front-loading brethren.
What can go wrong with a washing machine?
7 Common problems with washing machine Washing machine not starting. Washing machine is noisy. Excessive vibrations during operation. Washing machine making noise when draining or not draining at all. Washing machine over-filling or under-filling. Washing machine not spinning. Water leaking from soap drawer.
How do you fix a washer that won’t spin or drain?
What to Do When Your Washing Machine Won’t Drain Perform a Master Reset. Unplug your washer for about one minute. Test the Lid Switch Assembly. See if the Drain Hose is Kinked. Check the Drain Hose or Pump for Clogs. Clean out the Coin Trap. Check the Water Level Control. Schedule Washing Machine Repair.
How do I fix the spin cycle on my washing machine?
Redistribute an off-balanced load of laundry. Level an off-kilter washer. Check the power source. Stop using an extension cord. Inspect the spin switch. Stick to high efficiency detergent with a front-load washer. Undo any kink in the hose. Track down a blockage in the drainage system.
What causes a washer not to agitate or spin?
Common solutions for: My Washer Won’t Spin or Agitate. Inspect the drive belt to determine if it is broken or if it is loose on the pulleys. If the drive belt is broken or loose, replace it. If the lid switch assembly fails, the washer will not spin.
Can you fix a washing machine yourself?
Instead of calling in an expensive appliance technician, you can repair your washing machine by yourself. Most of these repairs require simple tools and can be performed by homeowners who have only limited appliance repair skills.
Is there a reset button on a washing machine?
Most newer washing machines come with a reset feature that allows you to restart the washer after it experiences an error code or fault. Some machines have a button you push to reset its motor. On a machine without a reset button, unplugging the washer and then plugging it back in often serves as the means to reset it.
