QA

How To Install An Inground Sprinkler System

Can I install my own sprinkler system?

Many homeowners choose to hire a contractor to install a sprinkler system, as constructing a DIY sprinkler system can be a challenging project for someone to complete on their own. However, with the right supplies and a little know-how, you can construct your own sprinkler system and save some money on labor costs.

How difficult is it to install a sprinkler system?

The hardest part of installing a DIY sprinkler system is laying all the underground water-supply piping. That is, if you dig the trenches by hand. Just push the saddle down onto the pipe at each sprinkler head location, then twist the handle to puncture the piping, so water can flow to the sprinkler.

How much does it cost to install a sprinkler system?

Sprinkler System Cost Sprinkler system installation costs $2,540 on average, or typically between $1,706 and $3,525. The size of your yard and the quality of the materials make the biggest difference in price, with larger sprinkler irrigation systems costing nearly $10,000 per acre.

Does a sprinkler system add value to your home?

If you are wondering whether a sprinkler system can add value to your home, the answer is yes, absolutely! Adding a sprinkler system is an investment that can add upwards $3,000 of value to your home. It adds curb appeal, convenience, and water efficiency features to your home for the market.

How deep should you bury a sprinkler system?

Dig for Your Sprinkler System The trenches will be relatively shallow, usually 6 to 12 inches deep, depending on your area’s freeze cycles and frost severity. The trench must also be deep enough to allow the sprinklers to retract underground to prevent breakage from lawn machines.

Can you run a sprinkler system off a hose bib?

By connecting a “Y” shaped hose connector to your hose bib, also called a faucet, you’ll also be able to use the bib for hooking up a sprinkler for the kids without disturbing your sprinkler system.

Are sprinkler systems worth it?

Benefits of getting a sprinkler system Sprinkler systems make lawn and yard maintenance easy and convenient. Without one, you’ll need to manually water your grass to keep it from drying out. A sprinkler system could also add value to your home and make it easier to sell, especially if you have a larger lot.

What size PVC pipe should I use for sprinkler system?

If you choose to use PVC pipe for your irrigation laterals, make sure to use pipe that is at least 3/4″ thick. 1/2″ inch laterals clog very easily. If you choose to use fittings, most common PVC fitting types work fine.

How much does it cost to install a Rainbird sprinkler system?

Rain Bird sprinkler systems cost $2,000 to $5,000 with professional installation, including a rain sensor and automated controller.

How long does it take to install a sprinkler system?

How long does it take to install the sprinkler system? Usually 3 – 4 hours depending on the size of the job. 90% of installations are completed in one day.

How much does a sprinkler system add to water bill?

That might not sound like a lot, but your sprinkler system uses about 12 gallons of water per minute, which works out to 2,160 gallons or $13 over three hours. A leak in the system will spike your water bill even higher.

What add the most value to a home?

What Home Improvements Add the Most Value? Kitchen Improvements. If adding value to your home is the goal, the kitchen is likely the place to start. Bathrooms Improvements. Updated bathrooms are key for adding value to your home. Lighting Improvements. Energy Efficiency Improvements. Curb Appeal Improvements.

What do I need to know before installing a sprinkler system?

5 Things to Know Before Installing an Irrigation System Different Types of Sprinkler Heads. There are a wide range of sprinkler heads that are used in irrigation systems. You May Need a Building Permit. Different Types of Irrigation Systems. Cost of an Irrigation System. Excavating Your Yard.

Should irrigation valves be buried?

Valves can be grouped together in manifolds, or installed individually – and valves should always be buried inside a plastic irrigation valve box. Never bury a valve directly in the dirt.

Should I flush sprinkler head ground?

If the old riser fitting came out with the old head, remove it and screw it onto the new head. Then test-fit the new head by screwing it into the water line. The top of the head should be flush with the ground, not sticking up into the grass.

How deep should a drip line be?

PVC pipe needs to be at least 12 inches deep, while the poly tubing used for drip irrigation only needs to be six inches deep. Digging trenches is hard work, so make the most of them by using the same trench for different landscaping needs.

How do you tap into an existing water line?

Situate the water line tapping saddle onto the pipe and clamp into place. Begin rotating the tap screw until it pierces the piping. Slowly unscrew the tapping screw and remove saddle device.

How do you tap into a water main?

It involves placing a tapping fitting onto a water main, in addition to a gate or ball valve that will control the water. After the fitting and valve are in place, the main is then tapped, with the valve being closed before the drill is detached.

How do you tap into a water line?

how to Tap Into The Main Water Supply Line Shut off your water supply at the meter. Dig to expose the service line. Tie into the service line, between. Remove a section of pipe, leaving a gap. Slip the tee over each end of the pipe. Tighten the compression nuts.