QA

How To Level An Intex Pool

Does Intex pool have to be perfectly level?

Any more than two inches is unacceptable. Intex pools that are three inches off or more will not last and no one should be swimming in one. In an extreme case, the pool will collapse from the pressure. If your above ground pool is off by three inches or more, it needs to be taken down, leveled and reinstalled.

What do I put under my Intex pool to level?

What to Put Under Above Ground Pools? Interlocking Foam Tiles. Carpet. Intex Ground Cloth. Flooring underlayment. Carpet padding. Sand.

How do you set up an Intex ground pool uneven?

To set up your Intex pool on uneven ground, Start by outlining your pool on the floor. Use a stake and place it at the center of the place then tie a string to it. Measure the string to the radius of the pool and add 1 foot to the measurement.

What happens if your pool isnt level?

The water will press with more force on one section of the pool than the others. This uneven weight distribution can buckle, twist or even collapse the pool wall, resulting in property damage and injury to anyone in or around the pool when it fails.

What happens if my above ground pool isnt level?

If an above ground pool is not level, the water’s weight can cause damage to the walls and liner. As a result, your pool will collapse, potentially causing property damage or personal injury. Properly leveling your pool can be tricky, so can fixing your unlevel pool.

How do you Relevel an above ground pool?

Drain some water. You are going to be lifting the lower side of the pool, so you need to get rid of some of the weight. Remove blocks. When you installed the pool, you put leveling blocks under the slab. Raise the wall. Replace blocks. Repeat. Fill the hole. Refill the pool.

How do you level a sloped yard for a pool?

Place stakes or sticks at areas that slope or are off-grade. You’ll need to dig away these area in order to create level ground for the pool. Dig away soil instead of building up low patches. Always dig away slopes and high spots to make them level with lower areas, even if it takes more work.

How do you level an uneven ground pool?

STEP 1: Determine your location and remove any large rocks or debris. STEP 2: Place 2x4s on the site and place a level on top. STEP 3: Add or take away soil until the ground is level. STEP 4: Repeat the process until the entire area is flat. STEP 5: Rake any remaining rocks or debris and tamp the ground.

Does an above ground pool have to be perfectly level?

Traditional above ground swimming pools are leveled at their bottom track. The bottom of an above ground pool doesn’t have to be level. Some will “dish out” the bottom of their pool so it is gradually deeper in the very center and that’s cool as it may make it easier to maintain the pool later on.

What can I use to level my pool?

The best tool to get the job done is a lawn roller, which you can rent easily from most garden centers. Go over the entire base for your pool, and pack it down flat. Then it’s time to bring out your level. Your goal here is to ensure nothing has changed and you’ve still got everything completely flat.

How do you prepare the ground for an Intex pool?

The Right Way: Mark the perimeter of your pool, and add 1 foot of extra space to all sides. Use a line level to measure at 12-36 points around the pool. Then use flat shovels or a sod cutter machine to remove turf and lower the high spots. Add a one inch layer of sand.

Can you partially bury an above ground pool?

The walls of an above ground pool typically consist of a thin aluminum wall that holds the pool liner. You will generally find above ground pool retailers willing to partially bury an above ground pool, but you can expect to leave at least half of the pool out of the ground.

Can you put an Intex pool on a slope?

The short answer is yes. By working with professional pool builders and landscapers, you can pursue pool installation even when you’re dealing with a slope.

How long does it take for an above ground pool to settle?

With just 1-2 helpers, and some simple hand tools and a drill, you can have an above ground pool installed and filling with water from the hose in 1 day. If you have a sloping hillside or drainage issues or are sinking a pool into the ground, it’ll take 2 days of work.

How many bags of sand do I need for a 15 foot pool?

How Much Sand Will I Need For Pool Installation? Amount for Sand Base with SAND COVE Amount for Sand Base with FOAM COVE 12′ Round 1.00 0.75 15′ Round 1.50 1.00 18′ Round 2.00 1.50 21′ Round 2.50 2.00.