Table of Contents
10 Tips and Tricks to a Fast and Cool-Looking Pinewood Derby Car Bake your block. Max out your weight at the regulation 5 ounces. Use all of the graphite (dry lubricant is usually allowed). Sand and polish your wheels and axles. Check alignment. Spend time on sanding. Use a high-quality paint. Add decals!.
What makes the fastest pinewood derby car?
The Black PRO Car is our fastest pinewood derby car. It pushes the Speed Limit! It is track-tested car ready to race featuring our race winning PRO friction-free BSA Ultra-Lite graphite-coated wheels and PRO BSA graphite-coated grooved axles.
Should you bake your pinewood derby car?
Should I bake the pinewood derby block? The short answer is no, do not bake the block. The idea behind baking the block is to remove moisture which will make the block lighter. Baking might remove more moisture but the block will quickly re-absorb the moisture after it is out of the oven and cooled down.
What is the fastest pinewood derby car time?
We used ultralight wheels and grooved axles. It was very fast. Nobody even came close to us. Our best time was 2.516 seconds on a 35 foot aluminum track.
What is the best weight for a pinewood derby car?
First, the basics: Your car should weigh as much as it’s allowed. In most races, a Pinewood Derby car’s weight is limited to 5 ounces. If your car weighs less than that, add coins or other weights. As far as where you should attach those weights to your car … well, let’s just say opinions differ.
Do heavier pinewood derby cars go faster?
Much has been written about the physics of pinewood derby cars, and this is one rare case in racing where heavy = fast. Aerodynamics have little effect in such a short race, but weight does and putting the weight at the back of the car will make your car faster on the flat of the track.
What shape makes a car go faster?
The shape of the chasis is similar to an upside down airfoil. The air moving under the car moves faster than that above it, creating downforce or negative lift on the car. Airfoils or wings are also used in the front and rear of the car in an effort to generate more downforce.
Do fenders help pinewood derby?
Pinewood Derby Fenders / Air Guides Add pizzazz to your pinewood derby car with our sleek fender accessories! Fenders improve air flow over the wheels resulting in a few milliseconds of advantage, during a tight race. Both front and rear fenders are available and are typically used together.
Where should the center of gravity be on a Pinewood Derby car?
The ideal placement for the center of gravity is 7/8-in. in front of the rear axle. Too far forward and you’ll lose potential energy (P=9.8mh or the energy caused by the item’s position). Too far back and your car will pop a wheelie, ruining any chance for a win.
How much weight does paint add to Pinewood Derby car?
Paint only adds a few grams (hundredths of a ounce). We generally weight up to 4.9 oz and then do the last weight adjustment at check-in.
What is the average time for a Pinewood Derby car?
Pinewood Derby Results. The average times with just weight added was 3.288 seconds. There was 0.188 seconds between the fastest and slowest car, about 23 inches. The average time was 2.994 seconds, about 44 inches faster than without graphite (0.353 seconds).
What is the best paint for a Pinewood Derby car?
ByBrittney. Pinewood Derby cars were painted over 100 times, and we selected the best paints for them. Sand and paint are the best way to apply these high gloss acrylic paints – they do not require primer or wood sealer. Water is the base of all of our paints.
Why does my Pinewood Derby car wobble?
Pinewood Derby Wheels Wobble are a very common issue. Derby wheels are made with an injection molding process. Because they are not machined from raw material, flaws such as concentricity (wobble) will cause a wheel to wobble because the bore is not aligned with the outer diameter. No wheel mold is safe from flaws.
Is it better to put weight on top or bottom of pinewood derby car?
Best Location to Weight Your Pinewood Derby Car When deciding on where to weight your car, you should try to reach a final balance point of the car 1 inch or less in front of the rear axle. Placing the weight lower on the car also gives greater stability.
How can I make my derby car faster?
10 Tips and Tricks to a Fast and Cool-Looking Pinewood Derby Car Bake your block. Max out your weight at the regulation 5 ounces. Use all of the graphite (dry lubricant is usually allowed). Sand and polish your wheels and axles. Check alignment. Spend time on sanding. Use a high-quality paint. Add decals!.
Can I add weight to my pinewood derby car?
The heavier your pinewood derby car, the faster it will go. Most race rules limit the weight to 5 oz so you want your car as close to the limit as possible. The Wedge block will need about 2.5 oz of additional weight to bring it up to the 5 oz limit. Then add the weights until the total is 5 oz.
