Table of Contents
Measure from the wall behind the toilet to the center of one of the closet bolts (which hold the toilet down). If the toilet has four closet bolts, measure to the center of one of the rear ones. Then measure from the center of the mounting holes to the back of the new toilet you’re considering.
How do I know if my toilet is 10 or 12?
If your toilet has four bolts rather than the standard two, you’ll measure to the center of the rear bolts. The standard rough-in measurements are 10, 12 and 14 inches. If your measurement is in between these intervals, round your number down to the nearest standard measurement.
How do you measure toilet rough-in?
The rough-in measurement of a toilet refers to the span between the wall behind the toilet and the center of the waste pipe. To measure the rough-in for your toilet, measure from the wall behind the toilet to the middle of the bolt caps (the caps holding your toilet to the floor).
What is the standard size of a toilet?
Standard toilet dimensions are typically between 28–30″ deep, roughly 20″ wide, between 27–32″ high, and have a rough-in between 10–14″.
How do I know what kind of toilet I have?
The number: Look under the water tank lid (on the bottom), or on the inside walls of the tank. * The number on the lid may or may not be the same as the in the tank or the number of the complete toilet model.
Can you replace a 10-inch rough-in toilet with a 12-inch?
The rough-in for your bathroom plumbing should match the rough-in for the toilet. Even if a toilet is designed for a 10-inch rough-in, you can still install it in a space with a 12-inch rough-in.
Can you replace a 14 inch rough in toilet with a 12-inch rough in toilet?
Replace a 14-inch rough-in toilet with a 12-inch rough-in toilet. You can definitely replace a toilet with a rough-in of 14 inches with one with a rough of 12 inches. The problem with this method is that a 2-inch gap will be left between the toilet tank and the wall. Install an offset toilet flange.
What does 12-inch rough in size mean for toilets?
The toilet rough-in refers to the distance from the finished wall to the center of the toilet’s floor drain or waste outlet. Most toilets have a rough-in of 12 inches, although it’s not uncommon for older homes to have an unusual size such as 10″ or 14″. Rear-outlet toilets are configured a bit differently.
How far from the wall should a toilet rough in Be?
In general, the toilet rough-in distance is 12″ from the center of the toilet flange to the back wall for a typical toilet. There should also be a minimum of 15″ from the centerline of the toilet to any wall or object on either side of the toilet.
Are toilets universal size?
Are there different sizes of toilet? Yes, toilets come in a range of different sizes, that’s why it’s important to measure your existing toilet seat before you buy.
How do you measure a 10-inch or 12 inch rough-in for a toilet?
Take the cover off of the toilet tank, and lay the toilet on its side to access the underside of the base. Measure from the back edge of the base to the center of the closet hole, or drain hole. Note if the measurement is 10 inches or 12 inches.
Do commodes come in different sizes?
Commode seats can come in different designs and sizes, which is also something to consider. For example, they may come in an oval shape, like a standard toilet seat, or a more elongated, square shape. Elongated seats are often better for larger users, as they can offer more support and comfort.
Is my toilet almond or biscuit?
A: If your kitchen has white appliances, compare to those. A: White paper test: Compare by holding a piece of white paper or an envelope next to your toilet. If your toilet is White, the paper will match. If your toilet is Almond, Biscuit, Bone, Natural, etc., you’ll see a difference.
What are the three types of toilet?
There are three main types of toilets that you need to look out for: Wall Hung toilets. Close Coupled toilets. Back To Wall toilets.
What are the different types of toilets?
Toilet Types Explained Double Cyclone Flush. Double cyclone flush toilets are the latest option on the market. Pressure Assisted Toilets. Gravity-Flush Toilet. Composting Toilets. Waterless “Dry Sanitation” Toilet. Upflush Toilet. Portable Toilets. Two-Piece Toilets.
Can you use a 12 inch rough in toilet?
12 Inch Rough In Toilet A 12 inch rough in is the most common measurement in bathrooms. This size allows for the most variety in the shape of the bowl and style of the toilet you purchase. Even though this is the most standard measurement, don’t forgo measuring (at least twice) before buying a new toilet.
Can you move a toilet over a few inches?
Yes, you can actually move a toilet. Even moving a toilet by a few inches without having to make a new hole in the floor is possible. You can use an offset toilet flange to move the toilet by a couple of inches on any side. This will allow you to use the same wastewater line and in turn help to save you a lot of money.
How do I make sure my new toilet will fit?
If the base of the new toilet is shorter than the distance between the rear bolt holes and the wall, it should fit. In small bathrooms where space is tight, also measure from the sides of the flange bolts to the sidewalls or other objects to assure side-to-side clearance.
What is the difference between a 12 and 14 rough in toilet?
While 12-inch rough-ins are more generally common than 14-inch rough-ins, they both have their merits, and sometimes you need to reduce the space taken up behind the tank, which is where a 14-inch rough-in comes in handy. So if you’re looking to install 14-inch rough-in toilets, then you’ve come to the right place.
