Table of Contents
How do you know what size Roman shades to get?
How to Measure for Inside Mount Roman Shades Measure the depth of your window frame, from the front of the opening to the glass. Measure the width of each window. Measure the height of your window opening in three places: left, center, and right. Order at the exact opening size with no deductions.
How do you measure and install outside mount blinds?
Outside-Mounted Horizontal Blinds Measure exact width where the blind is to be placed. Add at least 3 inches for overlap (1-1/2″ per side) for optimum light control and privacy. Measure exact height from the top of the proposed headrail location to the base of the sill.
How wide should outside Mount shades be?
After finding the widest point on your window, add at least 1 1⁄2 inches (3.8 cm) to each side, or 3 inches (7.6 cm) total, so the blinds have better coverage. For example, if the width of your window is 36 inches (91 cm), then get horizontal blinds that are at least 39 inches (99 cm) wide.
What size blinds do I need for a 35 inch window?
The actual width of the 35″ blinds are 34.5″ (half inch narrower) to comfortably fit inside a 35″ opening. So if your frame is exactly 34.5 inches, I would go with the 35″ blinds.
How much wider than window should Roman blind be?
Ideally Roman blinds should be fitted to the outside of the recess, extending a bare minimum of 5cms (2 ½ ”) both sides of the window.
Does it matter if Roman blinds are too long?
A roman shade will add a touch of style and elegance to any room. Approaching the problem of roman shades that are too long is not difficult. If you have roman shades that you love but they don’t fit the length of your window, you can easily make an adjustment and provide some cost effective budget decorating.
Can Roman shades be wider than window?
The roman will have to be made slightly smaller than the window width so that it can function properly and that will leave a small amount of room for light to seep into the room. One you could outside mount the roller shade (we recommend with an overlap of at least 6”) to eliminate most all of the light bleed.
How do I know what size blinds I need?
Measure both the width of the window and the height of the window. Consider adding an extra 3 inches to the width and height for optimum light control and privacy. Extending the blinds outside the window will also provide the space needed for the mounts and help the window appear larger than it actually is.
How much smaller should blinds be than the window?
Record the height of the window accurately, including any brackets or moldings you may have. Add three inches to the measurement to ensure sufficient mounting space. Deduct half an inch from the blind’s height when it extends beyond the frame. Need Mini Blinds?Jun 25, 2021.
Should blinds touch window sill?
Generally, blinds are usually fitted within a window recess and are fitting so that they touch or sit just above the window sill.
Should blinds be flush with window?
1. Measuring window frame for accurate blinds fitting. 1) Mounting flush with the wall gives a cleaner look, as it hides the depth of the window sill itself and gives a smooth surface against your wall. We recommend this in most cases if you are mostly concerned with aesthetics.
Are blinds supposed to cover trim?
While inside-mounted blinds provide good coverage, some gaps may remain on the side of the blinds as the blinds don’t cover the window trim. Outside-mounted blinds provide better coverage as they cover the entire window frame and thereby, the chances of any gaps existing on the sides become very low.
How do you measure for roller blinds on a recess?
If you want to fit roller blinds within your recess, measure the area like this: Measure the width of the window, starting at the top. Use the edges of the window recess as your guide. Now measure across the middle and bottom of the window. Take three measurements over the height of your window, too.
When measuring for an inside mount shade Which of the following is important?
The height of the window also needs to be measured in three different places: left, center, and right. These measurements should also only be taken of the inside of the frame for inside mount blinds. Like the width, the height measurement should also be rounded to the nearest ⅛” inch.
What are standard window sizes for blinds?
If you’ve ever wondered what the standard size of window blinds is, the standard window length ranges from 36 to 72 inches, and the standard width ranges from 24 to 60 inches.
Do blinds have to fit exactly?
Shades and blinds must fit precisely to a window’s measurements only if they are installed inside the window frame or opening. If the shades are installed outside of the window opening — called an outside mount — the shades typically are wider than the window by a few inches and can also be longer than the window.
Should blinds be longer than window?
In most cases, it is OK to have your blind longer than your window, even for inside mount. If you order the shade too long, it may not align properly when lowered to the sill of your window. Measuring a Window for Inside Mount. An inside mount blind should fit the window measurements perfectly.
Do Roman blinds look better inside or outside recess?
In summary. In summary, for Venetian, roller and vertical blinds, we would recommend they be hung from within the recess. However, Roman blinds would be better suited outside the recess, as they are able to let more light enter into the room.
