Table of Contents
How to Refinish a Dresser Step 1: Choose a Stain. Staining beautifies wood and helps reduce the contrast between the different types of grains in different pieces of furniture. Step 2: Remove Hardware, Drawers and Clean Surfaces. Safety Alert! Step 3: Remove Old Finish. Step 4: Apply Sanding Sealer. Step 6: Finish It.
How do you refinish a dresser without stripping?
How to restore wood furniture without sanding and stripping Remove any hardware. Wipe on mineral spirits. Clean the surface. Fix the white rings. Fill small cracks and imperfections. Try to fix the dents. Restore the colour with gel stain. Renew the lustre with a wipe-on finish.
Is it better to sand or strip furniture?
Stripping a finish is faster than sanding to remove it. But more importantly, sanding cuts through stain and patina (the color changes in wood caused by light and oxidation), and it does so unevenly. Jan 3, 2018.
Do you have to sand a dresser before staining?
Sanding and staining are important steps in achieving a professional finish on a wood dresser. Sanding smooths the wood grain during the prep phase and removes dust during the finishing phase.
Can I paint over varnished wood without sanding?
Can you paint over varnished wood without sanding? Yes. The oil based primer will stick to varnished or sealed wood. And then you can paint over it with latex paint.
How do you change the finish on wood furniture?
Method 1: Change Wood Color with a New Stain Remove the existing finish completely by sanding or stripping. Determine the wood species. Determine the undertone of the wood stains you are considering. Choose a wood stain that will either complement or counteract the existing undertone to get the look you want.
Can you hand sand a dresser?
Sanding several layers of paint off an antique dresser by hand can amount to a lot of work. Sanding a coat of varnish off a modern dresser with a power sander is a much easier task. In either case, selecting the right sandpaper for the job makes sanding more effective and the job go faster.
How do you stain a dresser without sanding?
Here are 5 Ways To Paint Furniture Without Sanding: USE A MINERAL PAINT. Mineral paint is very similar to chalk style paints in that no prep or prime is required. USE MILK PAINT + BONDING AGENT. As I already mentioned, the antique desk in this post was not prep-sanded. USE A BONDING PRIMER. USE A LIQUID SANDER/DEGLOSSER.
Do you have to remove old stain before restaining furniture?
You don’t need to remove all of the old stain to apply darker stain. But you do need to remove all of the lacquer, varnish or anything that will prevent new stain from absorbing into the wood. Your sanding block will initially glide over the old lacquer before it begins to cut into it and remove it.
How do you refinish a dresser?
How to Refinish a Dresser Step 1: Choose a Stain. Staining beautifies wood and helps reduce the contrast between the different types of grains in different pieces of furniture. Step 2: Remove Hardware, Drawers and Clean Surfaces. Safety Alert! Step 3: Remove Old Finish. Step 4: Apply Sanding Sealer. Step 6: Finish It.
What is the easiest way to remove varnish from wood?
All you need to do is start with 150-grit sandpaper and sand the entire surface. Once you’ve done that, move onto 220-grit sandpaper and repeat. This should remove the varnish. An orbital sander will make this job much easier and quicker if you’re removing varnish from a flat surface.
Do I have to sand after stripping wood?
Sanding. Even after using the chemical stripper, you’ll still need to sand the wood. While sanding doesn’t emit harmful chemical fumes, make sure you still have enough ventilation in whatever space you’re working in, as sanding does release dust and debris into the air.
What happens if you don’t sand before staining?
You need a smooth surface with no blemishes because stain will highlight scratches and dings in the wood. Always sand down to clean wood (if you have enough meat left of the wood) before applying any stain. Too fine and the wood won’t be able to accept the stain.
How much does it cost to refinish a dresser?
The average cost of $100 to $700 largely comes down to the type of furniture you’re looking to refinish and the condition of that piece.Furniture Refinishing Price Guide. Type Per Piece Price Range Dresser $300-$1,000 Bed $350-$900 Pool Table $300-$500 Kitchen Cabinets $1,600-$3,800.
Will paint stick to varnished wood?
You can paint over varnished wood as long as you use the right materials and painting process. The best paint to use is a water-based acrylic one. If you’re using an oil-based paint only use an oil-based primer, not an acrylic one. “Sweet, this means it can be done!.
How do you paint an old dresser?
Instructions Sand the Existing Finish. If your dresser has a smooth finish and is in good shape, feel free to skip this step if you are using chalk paint. Clean the Dresser and Let It Dry. Remove any dust and debris from the surface. Roll on a Coat of Paint. Trim With a Brush. Buff on a Wax Finish. Reattach Your Hardware.
What is the best paint to use on wood furniture?
For furniture, it’s best to use a satin or semigloss finish in either a latex or an oil-based paint. Never leave primer unpainted. If you choose a latex paint, a latex primer is an excellent choice for most uses. It goes on easily and blocks most stains, and it doesn’t have the odor of an oil-based primer.
Can you stain over already stained wood?
1. Staining over stain is easy and works beautifully if your applying a dark stain over a lighter stain on raw wood. 2. You can mix 2 or more stains together to make DIY custom stains.
How do you refinish wood furniture without stripping?
The key to re-staining a wood dining table top without having to strip off the original factory finish is to create a soft, faux wood grain appearance with gel stain. Followed by several coats of a durable clear sealer. It’s actually not that hard to do.
