QA

Quick Answer: How To Replace A Tub Spout

Is it easy to replace a tub spout?

Replacing a slip-on spout is easy: Just loosen the setscrew (usually with a hex wrench) and pull the spout off the copper pipe that protrudes from the wall. Twist the spout as you pull and be gentle so you don’t loosen any pipe connections inside the wall. Ideally, the new spout will fit perfectly onto the old pipe.

Are tub spouts universal?

Tub spout tips: Although there are only two kinds of tub spout types (threaded and slip) there are several “sizes” (lengths) in each group. This is where your patience is important. Not every store carries every length in each type. When we refer to size we do not mean the overall length of the spout.

What are the different types of tub spouts?

There are 5 main types of bathtub spouts. These are: Diverter bathtub spouts. Non-diverter bathtub spouts. Slip-on bathtub spouts. Threaded bathtub spouts. Bathtub spouts with a brass adapter.

Can’t get my tub spout off?

The first step is to cut through any caulk between the spout and wall. Then grip the spout near the wall with a 10-inch pipe wrench and try again with a little more gusto. Push counter-clockwise, using steady pressure. If that approach doesn’t work, you’ll need to cut off the spout with a hacksaw.

How do you measure a bathtub spout?

Measure. Measure the length of your tub spout from the back edge of the spout to the front where the threads start on the inside of the spout. Then measure the distance from the surface of the wall to the back of the threaded elbow inside the wall. Total the two and add 1/4 inch.

What is universal fit tub spout?

Fits a wide variety of tub/shower stems with help of a set of included adapters, a wrench and plumber’s tape. This product is a tub spout with diverter. The chrome finish of this tub spout with diverter will freshen up your bathroom and create a bright and relaxing feel.

What is standard tub spout size?

Tub Spout in Polished Chrome.

How do you remove a tub spout without screws?

Turn the bathtub faucet spout counterclockwise with the pipe wrench until you can twist the spout by hand. Remove the wrench and finish unthreading the spout by hand and remove it from the wall.

How do you replace a tub faucet with no access panel?

How to Replace Tub Faucets With No Wall Access Turn off the water valves at the main incoming water pipe. Remove the cap on the faucet handle and loosen the screw underneath with an Allen wrench. Pry out the clip around the cartridge with a pair of needle-nose pliers. Install a new cartridge inside the faucet head.

How far should tub spout stick out?

According to the installation manual for the spout, the nipple for the spout should be installed a min of 3/8″ to a max of 3/4″ past the finished wall.

What is the difference between a diverter and non diverter tub spout?

A diverter tub spout is designed with a mechanism inside that allows water to flow upward, which creates the necessary pressure to start a shower. A non-diverter tub spout, by its very name, works in the contrary direction of a diverter type tub spout.

Can you use PEX for bathtub spout?

I gather that 1/2″ PEX isn’t suitable to connect a tub/shower valve to the tub spout because the internal diameter of the PEX and especially its fitting is too restrictive, which will cause the shower to dribble while using the tub spout.

How much is a tub spout?

The national average materials cost to install a bathtub spout is $95.14 per spout, with a range between $85.36 to $104.92. The total price for labor and materials per spout is $193.86, coming in between $153.39 to $234.34.

Why is my new tub spout leaking?

Remove the spout and check for cracks in the inner pipe or clogs that could cause the water to build up and shoot backward. Corroded shower pipes can also lead to water leaking in the walls and out around the tub spout, if there are holes in the caulking, making it appear like the tub spout is leaking.

How do you remove an old Roman tub faucet?

Removing Old Roman Tub Faucet Loosen the screw located on the back of the spout’s base with a hex key. Then, pull straight up on the spout to remove it and/or unscrew any remaining base elements. You may need to slide a putty knife underneath the spout to loosen the putty first.

How do you remove a Moen Roman tub spout?

Step One-Will the Spout Fit? Remove the round plug button from behind the spout. Use a 5/32″ Hex wrench to remove the Hex screw from behind the spout. Pull up on the spout to remove the old spout. This may be difficult to remove due to sealant or putty around it. Measure the spout shank.

How do you remove a Roman tub faucet handle?

Faucet handles can be removed similarly with a screw on the handle’s back or top under a decorative cap. Use a flat-blade screwdriver to remove this cap. Or, the base can be unscrewed when turned counterclockwise by hand or with channel locks. Finally, scrape off any remaining putty on the tub surface.