QA

Quick Answer: What Is A Soda Blaster

A soda blaster is a self-contained system that includes a blast generator, high pressure compressed air, moisture decontamination system, blast hose, and a blast nozzle. The blasting material consists of formulated sodium bicarbonate (also known as baking soda).

What is the difference between a soda blaster and a sandblaster?

Sand blasting is applied using much greater pressure than soda blasting. Soda blasting may use only 20psi, but sand blasting can use anywhere from 70 to 120psi. Sometimes, however, soda blasting can offer more advantages in rust removal. Not only can it remove the rust, but it prevents it from forming again.

Are soda blasters any good?

Soda blasting is particularly effective at removing light rust, mill scale, spray-paint graffiti, and fire damage soot without damaging the base material underneath.

Can you soda blast with regular baking soda?

Can I use regular baking soda like I see in the grocery store? No. While all baking soda is chemically the same (NAHCO3) only ARMEX is formulated for use as a blast media and only ARMEX is manufactured by ARM & HAMMER™.

Is soda blasting harmful?

It is benign if ingested, inhaled, or if it comes into contact with skin. Unlike chemical cleaning solvents, soda blasting does not involve toxic fumes or the danger of skin burns.

What soda is used in soda blasting?

Soda blasting is a method of removing surface contaminants and coatings by using sodium bicarbonate (baking soda). Compressed air from specialized blasting machines propel particles against the surface to be cleaned.

Is soda blasting messy?

Soda Blasting is Messy Because soda is a crystalline powder the fine dust residue resulting from the blasting process is extremely difficult, if not impossible to remove from blasted metal surfaces and small spaces. This fine powder residue finds its way into electrical components and wiring harnesses.

Will a soda blaster remove rust?

Does BAKING SODA BLASTING remove rust? Sodablasting will remove light surface rust only. It will neutralize any remaining rust but will not bring the surface back to shiny metal. This limited time allows us to safely remove the rust without damaging or warping the metal.

Can you use glass beads in a soda blaster?

ProTip: Garnet, slag abrasive, and glass beads all rate about 6.0 on the Mohs Scale. Garnet and slag are not recommended for blasting cabinets; yet glass beads are one of the most used recycle abrasives. Unfortunately, increasing abrasive blasting pressure can cause the glass beads to break apart.

Can soda blasting remove paint?

Soda blasting can be used wet or dry to remove paint, corrosion, biological contaminants, oil, grease, carbon and many other coatings. Sodium Bicarbonate is a non-hazardous food grade material that is 100% water soluble and environmentally safe.

What is soda blasting good for?

Soda blasting can be used for cleaning timber, wood, oak beams, oak floors, doors, stairs & banisters, cars, boat hulls, masonry, and food processing equipment. Soda blasting can also be used to remove graffiti and to clean structural steel.

What are the benefits of soda blasting?

What’s the advantage of soda blasting? Cleaning & De-Coating in One Step. Unique Cutting Action. No Pre-Cleaning Required. No Need to Re-Profile Steel. Reduced Solid Waste. Natural Rust Inhibitor. Reduced Clean-Up costs. Benefits In Waste Disposal.

Can I use sand in a soda blaster?

Yes you Can Soda Blast in a Regular Sandblaster While it is possible it is not an ideal situation for two primary reasons. However, while these enhanced features of a soda blast pot are nice, a regular sandblaster can be used for soda blasting.

Can I use regular sand for sandblasting?

No, abrasives which contain more than 1% free silica are forbidden. In the past, blast cleaning operations were done with silica sand. The term sandblasting originates from those days.

What size compressor do I need for soda blasting?

Working at 100 PSI, the recommended compressor sizes are: #2 1/8-inch nozzle: 20 CFM. #3 3/16-inch nozzle: 45 CFM. #4 1/4-inch nozzle: 81 CFM.

Can breathing in baking soda hurt you?

At low levels, inhaled sodium bicarbonate is unlikely to cause any health effects. However, direct inhalation of large amounts can cause sneezing or coughing. That’s why it’s still a must to use dust masks or respirators, even if you’re only blasting away with baking soda.

Can you soda blast indoors?

Soda Blasting Indoors, soda produces a heavy dust which can cause visibility problems in enclosed spaces and necessitates full containment, negative air pressure and ventilation, especially when dealing with mold, where it is critical that dislodged spores don’t circulate to unaffected areas.

How long does it take to soda Blast?

“For most boats, the entire process takes one to two days and most of that time is the setup.” Armstrong recommends that the hull also is lightly sanded after blasting to remove any remaining soda residue or paint that might have been only partially blasted off.

Is soda blasting expensive?

Soda blasting uses expensive material and therefore is the most costly method of the three.

Can you reuse soda blasting media?

This means you can only use it one time. Either because of the low hardness of the media, the force with which it is being propelled, the hardness of the surface being blasted, or a combination of each – the blast media disintegrates into particulates that are too small to be reused.

Can you use walnut shells in a soda blaster?

Any chrome, plastic, rubber, trim, and other parts must be removed from the car or masked-off before blasting. Alternatively, less-aggressive medias, such as Walnut Shell, will do a great job at removing paint. Soda is a perfect choice for steel, aluminum, plastic and fiberglass.

Can you soda blast an engine?

Yes, you can soda blast a complete engine but we don’t recommend it. This is because soda blasting uses highly pressurized water and air to clean surfaces. The pressure can push small particles through seals and into the engine. As soon as these particles enter the engine they can cause serious damage.

Can you soda blast with pressure washer?

Safely remove mildew, oil and grease, and even graffiti by using baking soda with your pressure washer. Baking soda designed for “soda blasting” can be purchased from industrial cleaning suppliers for large projects or, for smaller projects, a small box of a baking soda from the grocery store can be used.