QA

Question: What Is The Best Way To Level A Hot Tub On Uneven Concrete

Leveling a hot tub that is on uneven concrete can be done with simple shims if the slope is less than one inch. For steeper slopes, leveling will require more involved solutions such as custom-built pads of wood, sand or gravel, or even a new concrete pad.

How do you make a level pad for a hot tub?

Concrete Pad Remove all the grass and dig down at least 6 – 8 inches to prepare the base for your concrete spa pad. layer with crush stone and wire mesh to keep the concrete from shifting or cracking. Pour your concrete and finish level for your hot tub water line to be level when in place.

How level does a hot tub base need to be?

Concrete Base You can also add a deck or patio trim around the bottom if there is visible concrete that you find unsightly. We recommend a concrete pad that is at least 10cm thick. We also recommend the concrete to be sloped at 1.5cm per 3.5m, this ensures water runs off the pad and prevents pooling.

How much of a slope can a hot tub sit on?

There should be a maximum of ½” (1.27cm) slope in an 8′ (2.44m) run. Do not use shims to level the spa, this could create tension on the spa shell which might result in damaging your spa. Because your spa pad must provide continuous support for the entire base of the spa, you should never level it with shims.

Does a hot tub have to be completely level?

Once a hot tub has been filled with water and bathers, it can weigh over 8,000 pounds. Any surface dips can create stress on the hot tub shell, which can lead to cracking. When leveling a hot tub, it is important to ensure that the surface is completely flat but also that water drainage can easily occur.

How do I level my yard for a hot tub?

Place a layer of gravel on the leveled spot. The thickness of the layer will depend on the size and weight of your hot tub, but a layer four to six inches thick should be adequate for most hot tubs. Extend the gravel out around the tub in all directions, to avoid having a muddy area around your hot tub.

What is the best base to put a hot tub on?

A concrete surface is an excellent base for your hot tub as this material is extremely sturdy and long-lasting. If you have an existing patio made of concrete bricks, make sure it’s in good condition and is level (not angled for drainage). A customized poured concrete pad is an even better choice.

How do you level a hot tub with gravel?

Gravel should be completely flat and level before placing the hot tub to avoid damage. Take extra care to level it with your shovel and ensure there are no high spots.

Can you put hot tub on gravel base?

An alternative to a prefab concrete pad is to use a layer of gravel for the hot tub base. Gravel has two main advantages, it is good for drainage and easy to install. So yes, a hot tub can sit on gravel! To find out more about hot tub installation requirements, download a hot tub buyer’s guide.

What is a spa leveler?

The Spa Level-R™ is a solid, secure base used to level your hot tub. It elevates your hot tub off the ground to encourage proper water run-off which will: Protect the hot tub base from wood rot damage. Eliminate green mildew stains on your concrete.

Should a hot tub pad be sloped?

The spa pad should be at least the size of the spa. If you are going to pour cement pad put a slight slope in it so that water won’t pool under the spa. A 3/4″ slope in a 10 foot wide cement pad is adequate. If you use bricks or patio blocks, they should set on at least a 3″ base of sand, pea gravel or crushed stone.

Can you put a hot tub on pavers?

A hot tub can be placed on pavers, but ensure that they can bear the weight of the hot tub, including water and persons. Ensure that the floor is level and solid. Most pavers are laid at an angle to improve rainwater removal. Such a slope is not suited for a hot tub.

How long should concrete cure before putting a hot tub on it?

They said one week is the MINIMUM; they said it takes up to 28 days for the concrete to completely cure, so they recommend 28 days before putting something really heavy (like a hot tub) on it.

What is a hot tub pad?

Spa pads are wonderful hot tub accessories that provide a sturdy base for most hot tubs, while still allowing for flexibility in location. People who opt for an indoor hot tub typically use spa pads so that they won’t need to do any major renovations, however, spa pads can be implemented outdoors as well!Oct 30, 2019.

What should I put under my hot tub?

Gravel is an excellent choice for a hot tub base. It’s relatively cost-effective and easy to install, plus it’s very good for drainage. This is important because you need to make sure any rain water or overspill from your hot tub is able to drain away from the base. And unlike concrete, gravel won’t crack over time.

Can you put a hot tub directly on the ground?

Outdoor hot tub placement, such as decks, concrete or brick patios, is common. However, the hot tub can be placed on any solid, uniform, level surface. Do not place your hot tub on grass or bare ground.

Can I use shims to level a hot tub?

Leveling a hot tub that is on uneven concrete can be done with simple shims if the slope is less than one inch. For steeper slopes, leveling will require more involved solutions such as custom-built pads of wood, sand or gravel, or even a new concrete pad.