Table of Contents
Deck boards are typically 12 or 16 feet long, roughly 5-½ inches wide and about an inch thick – though specific dimensions can depend on the style of board you choose. Composite decking can come with two bottom profiles. Solid bottom boards are most common and maximize strength.
What size boards are best for decking?
Width: Six-inch wide boards are ideal in most cases. Four inch wide material takes longer to install, creates more gaps and requires a lot more fasteners—but you can use it. Eight inch wide boards, because of their greater width, have more of a tendency to crack and cup; avoid using them.
What size are treated deck boards?
x 16 ft. Standard Pressure-Treated Decking Board.
Can I use 2×6 for deck boards?
Wood decking is commonly available in 2×6 and 5/4 x 6 profiles. 5/4 x 6 is produced specifically for decking and is milled with a radius edge or bull nose. 2×6 is thicker and is stronger, but is also more expensive. Spacing between deck boards provide a few critical functions.
Should I use 2×4 or 2×6 for deck?
If you use 2x4s for deck joists, it may cost more money and work in the long run. The material costs more than if you purchase 2x6s because the 2x4s can’t span as far, and you must create more beams and footings for support. You also can’t include guardrails and stairs with 2x4s as your support.
Can I use 1×6 for decking?
Never use 1×6 or 5/4×6 material in close to ground applications. Spacing between boards: You must allow space for your deck boards to expand when they take on moisture, as they will inevitably do when exposed to wet weather, rain or high humidity.
Should I use 2×6 or 2×8 for deck?
For upper-level decks, 2×10 is recommended as the minimum size to use for strong guard post connections. 2×6 joists should only be used on ground-level decks that do not require, and will not provide for, any guards. Most decking is not strong enough to support longer spans than 16″.
How many deck boards do I need for a 12×12 deck?
For example, a 12-foot x 12-foot deck of 5/4 x 6 pressure treated wood decking on 16 inches on center spacing of joists will require: A 12-foot long deck with joists 16 inches on center will require 10 joists. 20 fasteners x 26 (number of rows of decking) = 520 fasteners. Add 10 percent to be safe.
How many decking boards do I need for a 10×10 deck?
For a 10×10 square deck, you would therefore need twenty-two 10′ deck boards. Dimensions for deck boards can vary depending on the look you want and the deck board type you use. However, the most common is a 5/4” thick by 6” wide deck board of any length.
Should deck boards have a gap?
When using wood decking, you want a gap of at least 1/8 of an inch after your decking has dried out. If you’re using decking that’s already been dried out, you can leave a 1/8-inch gap when you install. Many decks will use “green” wood, or wood that hasn’t been dried down or kiln dried.
Should you leave a gap between deck boards?
Proper deck board spacing should have a 1/8-inch gap after the decking has dried out. If you install your decking using wet boards, pressure-treated decking that has not yet dried out, then you should install them with no gap as a gap will be created as they dry and shrink.
Can you use 1 inch boards for a deck?
Certain tropical hardwoods, like Ipe, for example, are hardier than common pressure-treated woods like cedar or pine. So what size are deck boards made of different types of wood? The standard thickness for all types of wood is 1”, however, for weaker woods, choosing a thicker board can give you a sturdier feel.
Is 4×2 OK for decking?
4 x 2 Timber Rail / Joist These decking joists are the most common sized framing timber for decking. They provide a solid structure for fixing your decking boards too. When making your decking frame you should use a 400mm spacing between your timber joists.
What lumber Do I need to build a deck?
The three common choices when it comes to wood decks are redwood, cedar and pressure-treated wood that can be made of various types of wood species. Redwood and cedar are both naturally insect and rot resistant and have a natural look, but each has its own inherent issues.
What is a 5 4 deck board?
5/4″ decking is thinner than 2×6 boards. Both with a deceptively different material thickness. 2×6 Deck Boards actual Dimensions 1.5″ x5. 5.” 5/4 Decking Actual Dimensions 1″ x 5.5.”.
How thick is a 1×6 deck board?
Nominal vs. Actual 1x Lumber 1×6 3/4 x 5-1/2 1×8 3/4 x 7-1/4 1×10 3/4 x 9-1/4 1×12 3/4 x 11-1/4.
How wide is a 1×6 deck board?
The same is true of pine. A 1×6, for example, actually measures 3/4″ x 5 1/2″.
How far can a 2×8 span for a deck?
Depending on various factors, the maximum span for a 2×8 floor joist is 16′ 6”. The maximum span for roof rafters is 23′ 9”. For headers, the maximum span is 11′ 2”. Finally, a single deck beam has a maximum span of 5′ 11” and double maxes out at 8′ 9”.
How far can a 2×8 span without support?
Based on different manufacturers’ specifications, the maximum span a 2×8 LVL is from 12′ to 15′. Spans are also affected by the species of wood used in the manufacture of the laminated joists, with western woods edging out eastern woods in unsupported span distance.
What is deck blocking?
Deck Blocking And Bridging Probably, the most commonly used technique is to install small pieces of material in a zig-zag pattern between the perimeter joists to create a rigid rim joist that prevents bounce and increases the strength of the rail attachment.
How many Trex boards do I need for a 12×12 deck?
(Choose from 8, 12, 16, or 20 ft board lengths. Choose which board best fits the dimensions of the deck.Decking Materials. Board length Boards required 8 FT 206 12 FT 137 16 FT 103 20 FT 83.
How many square feet does a 16 foot deck board cover?
EXAMPLE: Say you’ve chosen the 16-foot standard width deck board. First, take the width (5.5 inches) and convert it into feet by dividing it by 12 inches, which gives you 0.45 feet. Then multiply 0.45 by 16 to get the board’s area: 7.33 square feet.
