Table of Contents
Use 1 1/4 inch nails for quarter round (with typical 3/4 inch thickness), shoe molding, trim molding over laminate floors, and plywood flooring. Use a size less than 2 inches for paneling, typically 1 inch to 1 5/8 inches. Use shorter nails for board and batten. Less than 1 1/5 inches is ideal.
What size nails do you need for quarter round?
Attaching Quarter Round Because it’s finish trim, install quarter round with finish nails, which have smaller heads than standard nails. A finish nail gun, fitted with 1.5- or 2-inch finish nails, works well.
What size brad nails should I use?
The rule is simple: a brad should be three times as long as the thickness of the material you are fixing. Example: if the material is 15 mm thick, the brad should be 45 mm long. Choose a brad gun that takes the length of brad you need.
Can I use 16-gauge nails for quarter round?
They work well on birdhouses and other thin cuts of wood. Brads are excellent for trim work, including narrow trim around windows or doors, shoe moulding and quarter-round moulding. Finish nails are versatile nails with a 15- or 16-gauge diameter. They’re designed for thicker cuts of wood.
Can you use 18 gauge Brad nails for baseboards?
What gauge nails to use for baseboards? Based on nail size, you should be looking for anything between 15 gauge and 18 gauge. With these gauges it you can easily find nails up to 2.5” long which is an ideal length for baseboard nails.
Can you use 18 gauge nails for quarter round?
If you’re doing lighter molding, such as quarter-round at the bottom of your wall, or installing a chair rail, an 18 Gauge Brad Nailer is fine for the job.
Can I use brad nails for quarter-round?
What Size Brad Nails For Quarter Round? Most quarter round is installed with finish nails. To avoid having to use putty to fill in holes, some professionals do use brad nails. To install quarter round, use nails that are 1 1/4 to 2 inches in length, depending on the thickness of the material.
What is a 18 gauge brad nailer used for?
18-gauge brad nailers shoot a thin nail between 3/8” to 2” depending on the model. They leave a smaller hole thanks to their small head and so are less likely to split thinner wood. They’re the ideal nailer for attaching casing to window and door jambs because they’re less likely to blow out the connections.
What is the difference between a 16 gauge and 18 gauge brad nailer?
Brad nails (often just called brads), are 18 gauge, which is 0.0475 of an inch. By comparison, a 16-gauge finish nail is 0.0625-inch thick. While the difference doesn’t seem like very much, the shorter length is a good indicator that a brad nail won’t hold material of the same maximum thickness as finish nails.
What nail gun is best for quarter round?
For the most part, the best tool for nailing quarter-round is a brad nailer. Brad guns shoot thinner nails from the smaller 5/8-inch to 2-inches, which are fine for attaching light moldings such as quarter rounds – you don’t want to split the molding or leave visible holes.
What is the difference between a brad nailer and a pin nailer?
For starters, brad nailers use a much larger 18 gauge nail. This nail has a much larger diameter head, which is why a brad nailer leaves a visible nail hold that must be covered with putty. Pin nailers, on the other hand, use a smaller 23 gauge nail.
Is 18 gauge nailer good for trim?
18-gauge brad nailer It’s perfect for standard trim, furniture making and odd jobs around the shop. Models that shoot brads up to 1-1/4- in. are common, but I strongly recommend spending a few bucks more for a gun that can handle brads up to 2 in.
Can you hang shiplap with Brad nails?
Shiplap can be installed directly to sheet rock/drywall. Simply mark the stud locations for nailing the shiplap or you can apply a construction adhesive such as liquid nails. Use a nail gun with 18 gauge 1 3/4”long brad nails. Nail through the top flange which is the longer of the two flanges.
Is shoe molding the same as quarter round?
Quarter round is another moulding style typically paired with baseboards to cover up gaps and imperfections between the base and the floor. As such, it essentially has the same purpose as shoe moulding. However, this style of moulding is always shaped like a quarter of a circle, hence the name.
Should I nail or glue quarter round?
A: Quarter-round should be nailed to the base boards only. It is intended to hide gaps between the base and floor. It should also permit a little movement in the flooring. Plus, it absorbs the impact of feet and furniture legs, so you may want to replace it sometime—thus, don’t glue it.
What’s the difference between 16-gauge and 18 gauge nails?
The 16-gauge finish nail has a 0.0625-inch-thick shank and is typically supplied in 1 to 3½-inch lengths. Because it is thicker, it holds better than 18-gauge brads. Also, it can be used to fasten thicker, denser pieces of wood.
Can you use 16-gauge nails for framing?
Though you can drive your 16d nails by hand, framing nailers speed up the job and is the way to go for wood framing in buildings and heavy construction. As you’d expect, a 16d nail gun shoots up to 3½-inches nails to fasten 2x4s and there are tons of models to choose from out there.
Can you use 18 gauge nails for framing?
Common nails are made with a heavier-gauge wire, typically about 5/32” thick. They’re generally used in house framing, where strength is important. Box nails have thinner-gauge shanks—about 1/16” which are best for fastening nonstructural things like trim, shingles, and siding.Choosing the Right Nail for the Job. Gauge Common 16 0.06 18 0.05 23 0.03.
