Table of Contents
Attaching Quarter Round Because it’s finish trim, install quarter round with finish nails, which have smaller heads than standard nails. A finish nail gun, fitted with 1.5- or 2-inch finish nails, works well.
What gauge nails do you use for quarter round?
If you’re doing lighter molding, such as quarter-round at the bottom of your wall, or installing a chair rail, an 18 Gauge Brad Nailer is fine for the job.
Can I use 16 gauge nails for quarter round?
They work well on birdhouses and other thin cuts of wood. Brads are excellent for trim work, including narrow trim around windows or doors, shoe moulding and quarter-round moulding. Finish nails are versatile nails with a 15- or 16-gauge diameter. They’re designed for thicker cuts of wood.
Can you use 15-gauge nails for quarter round?
If this is the route you’ll take, a 15 ga finish nailer would be the best nail gun for quarter round since the 15 ga nails are larger which makes them ideal for nailing into bigger baseboards. Keep in mind that an angled 15 ga finish nailer reaches into tight spots better than straight finish nail guns.
What is the best size nail for trim?
The 15-gauge nails, ranging in length from about 1-1/4 in. to 2-1/2 in., are strong enough to secure door jambs and other heavy trim materials.
Do I need a nail gun to install quarter round?
When replacing quarter-round, many contractors use a nail gun and compressor. However, most homeowners only require simple hand tools to nail quarter-round baseboard trim. It is important to make your angle cuts and dry fit the quarter-round before nailing it onto the baseboard.
Can you use a brad nailer for quarter round?
The preferred tool for nailing shoe molding or quarter-round is an electric finish or brad nailer. This tool will automatically set or recess small finish nails, and can greatly speed up your work. To use a nailer, first calibrate the depth of the nailer, using a piece of waste trim on another waste board.
Which is bigger 15 gauge or 18 gauge?
The difference between them is the gauge nail that they shoot. The most common and readily available types are 15 gauge, 16 gauge, 18 gauge, and 23 gauge. The higher the number, the thinner the nail and the smaller the hole.
What is the difference between a brad nailer and a pin nailer?
For starters, brad nailers use a much larger 18 gauge nail. This nail has a much larger diameter head, which is why a brad nailer leaves a visible nail hold that must be covered with putty. Pin nailers, on the other hand, use a smaller 23 gauge nail.
How long should brad nails be?
The rule is simple: a brad should be three times as long as the thickness of the material you are fixing. Example: if the material is 15 mm thick, the brad should be 45 mm long. Choose a brad gun that takes the length of brad you need.
What size nails does a brad nailer use?
Brad nailers use smaller 18-gauge nails. Brad nails (often just called brads), are 18 gauge, which is 0.0475 of an inch. They vary in length from ½ to 2½ inches. By comparison, a 16-gauge finish nail is 0.0625-inch thick.
Should you glue or nail quarter round?
A: Quarter-round should be nailed to the base boards only. It is intended to hide gaps between the base and floor. It should also permit a little movement in the flooring. Plus, it absorbs the impact of feet and furniture legs, so you may want to replace it sometime—thus, don’t glue it.
Can you use 18 gauge nails for baseboards?
What gauge nails to use for baseboards? Based on nail size, you should be looking for anything between 15 gauge and 18 gauge. With these gauges it you can easily find nails up to 2.5” long which is an ideal length for baseboard nails.
Can you build furniture with a brad nailer?
Brad Nailers – This gun is great for woodworkers. This universal nailer can assist with most woodworking builds and other related projects. Some might use a Pin Nailer just to hold a piece of wood or material in place until the adhesive or glue dries out. This nailer is also great for thin and delicate trim.
Can you use 16 gauge nails for framing?
Though you can drive your 16d nails by hand, framing nailers speed up the job and is the way to go for wood framing in buildings and heavy construction. As you’d expect, a 16d nail gun shoots up to 3½-inches nails to fasten 2x4s and there are tons of models to choose from out there.
Should quarter round touch the floor?
It should match the flooring or match the baseboards. Buy bare wood quarter round and stain it to match hardwood floors. You could also buy primed quarter round, which is flat white, and paint it with semi-gloss paint to match the baseboard.
Can you caulk quarter round?
Caulk is an alternative to putty if you installed quarter round with a white finish. Use it sparingly to fill gaps or nail holes and wipe it with a wet fingertip or rag to make it smooth.
Is shoe molding the same as quarter round?
Quarter round is another moulding style typically paired with baseboards to cover up gaps and imperfections between the base and the floor. As such, it essentially has the same purpose as shoe moulding. However, this style of moulding is always shaped like a quarter of a circle, hence the name.
Can a finish nailer use brad nails?
Brad nails are formed from a fine, 18-gauge wire, which means they are smaller in diameter and typically have less holding strength. The benefit to an 18-gauge brad is its size. Finish nailers will run 15- or 16-gauge finish nails, in both angled and straight varieties depending on the tool.
