QA

Quick Answer: Where Does The Red Wire Go On A Ceiling Fan With Remote

Connect the red wire from the ceiling to the black wire in the fan. Cap off the black and white wire from the output side of the remote receiver module. So the white wire on the receiver is capped? @user38908 The blue (or black depending on how you want it) coming out if the remote module would be capped.

What do I do with the red wire when installing a ceiling fan?

A red wire up in the ceiling fan junction box usually indicates that the wiring has been installed which provides separate switch for the light and a separate switch for the fan motor. If your ceiling fan does not have a light fixture, then simply cap off the red wire and attach the fan motor to the black wire.

Can I connect red and black wires together?

Red Electrical Wires These wires are typically used for switch wiring as well as the interconnection between smoke detectors hard-wired into the power system. You can link two red wires together, or you can link a red wire to a black wire. Since red wires conduct current, they are considered hot.

What does the red wire connect to?

Black or red wires always carry power from the service panel (breaker box) to your home’s devices. What are Red Wires? Red wires are usually used as secondary hot wires. Red wires are also hot and should be clearly marked to avoid the dangers of electrocution.

Can I connect red and black wires together ceiling fan?

If you have black and red wires in the ceiling fan power box, the are likely from the same branch circuit source, one black wire in the wall switch box, and then black and red from the double switch to the fan ceiling box. This way you can run the fan and the fan light kit separately. Don’t connect them together.

What is the red wire on a ceiling light?

How to Connect the Red Wire for a Ceiling Light Fixture. The red wire is most likely a spare wire that was intended to be used when wiring for a ceiling fan. Typically when a ceiling fan is installed the red wire is most commonly used for the light and the black is commonly for the fan motor.

Where does the red and black wire go?

Black goes to the lead coming from the wall switch for the fan motor. Red connects to both the light kit “hot” wire, likely blue or red, and the lead coming from the wall switch for the lights. The other leads from the light kit need to be connected accordingly, white to the neutrals and green to the grounds.

Which wire is live red or black?

The live wire is brown in new systems and red in old systems. The neutral wire is blue in new systems and black in old systems.

What would happen if you switched the black and red wires?

If you switched the wires, what would happen? Red is positive charge, black is negative charge. If you aren’t running if you aren’t connected correctly.

Does the red wire connect to black or white?

Sheathed cable with a red wire always is accompanied by a black wire, a white wire and a bare wire. Very old homes may have cable that excludes the bare wire.

What color wires go together for a ceiling fan?

The black wire is the hot wire that leads to the switch. The white wire is neutral and completes the electrical circuit. Copper or green wire is the ground wire and keeps your fan from experience power surges.

Where does the red wire go on an outlet?

The red wire (switched hot wire) going to the outlet, wires into the other side of the switch and the white wires (neutral), tie together to complete the return side of the circuit. One of the most common wiring configurations your going to find with outlets are shown in the diagram below.

What is the red wire in a 3 way switch?

Red wire: The second hot/traveler wire is the red wire that serves the same purpose as the black wire between the two switch boxes. Depending on toggle switch configuration, either the red wire or the black wire will be hot if the light is on, but not both.

How do you attach a red wire to a ceiling light?

Test the wires in the ceiling box with a voltage tester. Turn off the power to the circuit, either by flipping a switch or turning off the breaker in the main panel that controls the circuit. Twist a wire cap onto the red wire, then push it into the box.

Can I just cap the red wire?

If you don’t have a fan, simply put a cap on the red wire, and connect the light normally to the black wire. You will then have a switch which does nothing. This is fine. Do not splice the existing wires together as another answer suggests.

Can I connect a black and red wire in the ceiling with a black wire in the light fixture?

If the red and black wires are connected together already and energized, yes you can do that but you will need a pull chain light or a remote control, if they are not switch controlled.

Is red and black wire the same?

Standard House Wiring Colors In the standard wire color code, the hot wire in a cable with two conductors plus ground is black, and the extra hot wire in a three-conductor set is red.

What Colour is red wire?

The live Red becomes Brown. The Neutral Black becomes Blue. The Earth wires continue to be Green and yellow.

Can a red wire be neutral?

You CANNOT use a red wire for a neutral. Unless you are in Canada and have a “heating circuit” cable with only a red and black there should definitely be a white wire present.