QA

Where To Buy Pegboard

Do they sell pegboard at Home Depot?

Pegboard – Storage & Organization – The Home Depot.

Why is pegboard so expensive?

Wood pegboards are the most expensive type of pegboard because they have a decorative look. Metal pegboards are usually made of aluminum or stainless steel. Because of how heavy these panels are, they’re strong enough to hold large tools.

What size is standard pegboard?

Pegboard is produced from hardboard and HDF (High Density Fiberboard). Standard patterns offered are 1″ x 1″ OC, 1/2″ x 1/2″ OC, 1″ x 2″ OC, and 1″ x 3″ OC. Hole sizes are 9/32″ diameter (nominal 1/4″) and 3/16″ diameter (nominal 1/8″).

How much space do you need behind Pegboard?

Pegboard needs about 1/2 in. of ‘standoff’ space behind it so the hooks can be inserted. Plastic and metal pegboard panels have this space built in, created by the L-shape flanges at the edges.

What can I use instead of pegboard?

Plywood. Bolt plywood to the wall where you need to hang items for easy access. Sheets of plywood can be cut to any size and bolted to the wall to form an inexpensive pegboard alternative. Tools are then hung on nails instead of hooks.

What kind of pegboard is best?

Best Overall: Dorman Hardware 29993 Plastic Pegboard. Best Metal: Wayfair Basics Steel Pegboard Panel, Set of 2. Best for Garages: Wall Control Galvanized Steel Pegboard Pack. Best for Tools: Seville Classics Steel Pegboard Set, 24 x 48 inches. Best for Kitchens: Umbra Peggy Adjustable Storage System For Kitchen.

How do I know what size pegboard I have?

Pegboard holes come in two sizes: either the larger 9/32 inch holes or the smaller 3/16 inch holes. The larger 9/32 holes are for accommodating 1/4 inch peg hooks but can also hold the smaller 1/8 inch peg hooks.

How do you make pegboard look good?

Frame it! Building a frame is a great way to give a finished look to the edges so your pegboard looks more polished. If you aren’t into building your own, you can also have a custom frame built for it at a framing shop or buy as large a frame as you can find and then cut your pegboard to that size.

What thickness is pegboard?

Two common thicknesses for pegboard hangers are 1⁄8″-dia. and 3⁄16″-dia., both of which fit into standard pegboard hole configurations.

Can you Mount pegboard on drywall?

Pegboard goes up pretty easily and can be installed over drywall or even bare studs (such as in an unfinished garage). The trick to installing it is to create a 1/2-inch or larger gap between the wall and the back of the pegboard.

Can pegboard be painted?

When painting pegboard, we would recommend using a paint gun (or spray paint) over rollers. When using rollers, it will be much easier to get the pegboard holes clogged up, which makes it harder to fill your board with all your pegboard accessories once it’s painted. Ideally, you’ll use a professional paint sprayer.

Can I make my own pegboard?

Drill a hole through each point you’ve marked, making sure you drill all the way through the wood. Ensure you use a bit that is the same size as your dowelling, so the pegs fit in securely. This step is completely optional (you might like the raw wood look), but I think paint adds a bit of personality to the pegboard.

How can I organize my tools without pegboard?

Hang a Pegboard Storage Wall Step 1: Find the area where you want to put your pegboard. Step 2: Locate the studs in your wall using a stud finder and mark them with a pencil. Step 3: Mount your pegboard in place and secure it via the studs. Step 4: Finish securing your pegboard to the wall with standard drywall screws.

Are Pegboard holes universal?

Yes, but the holes need to be a quarter inch in diameter. (Pegboard comes in two hole sizes: 3/16 and 1/4.) Pegboard hole spacing is standardized so the hooks will fit.

Does pegboard come in colors?

The custom color pegboard is available at many discount department stores as well as online. The panels come in a sleek galvanized gray metal, painted white, green, red, orange, black or gray.

How do you cut a pegboard without a saw?

If you have no circular saw for cutting a pegboard, you can use a utility knife for straight cutting a pegboard. You can even use a utility knife for cutting circles in a pegboard. What is pegboard made of? The pegboard is mostly composed of materials like compressed wood fiber, resin, with a coated thin layer of oil.

What size dowel fits into pegboard?

Doweling at that small diameter should not be too long or else it could snap under excess weight. Cut each piece no longer than 3 inches. Wider tools may require a slightly longer peg, but cut those pieces separately. Most tools will be well supported with 3-inch dowel.

Can you wallpaper over pegboard?

Wallpaper is my favorite way to decorate pegboard. It comes in a variety of colors and patterns, and is very easy to install (even easier and less time than paint!).

Can pegboard be cut?

Jigsaw or circular saw: Using a jigsaw or circular saw is the best way to cut pegboard. For cutting pegboards, you need to use the proper size blade for the saw. You have to select the blade with fine sharp teeth for ensuring a clean cut through the pegboard.

How strong is pegboard?

Pegboard manufacturers state the standard 3/16″ pegboard can safely hold 100 lbs of weight. The pegboard I tested showed a single peg can hold over 150 lbs without tearing or pulling away from the wall.

How do you build a pegboard wall?

Step 1 – Locate Wall Studs to Attach Pegboard. Step 2 – Cut and Attach 1×3 Around the Perimeter of DIY Pegboard Wall. Step 3 – Attach the Middle 1×3 Boards. Step 4 – Frame Around Wall Plug. Step 5 – Install the Largest Pegboards Pieces First. Step 6 – Install the Remaining Smaller Pegboard Pieces.