QA

Question: Why Is My Joint Compound Cracking 2

The most common cause of cracking in freshly applied drywall mud is when it is applied too thickly. This exacerbates the issue with evaporation-based drying and can even crack curing compounds. Past this point, applying more drywall mud will cause the cracking to worsen if done improperly.

Why are my drywall seams cracking?

Cracks form due to stress placed on the seams. These cracks tend to occur around high-stress areas like windows, door frames, and corners. This stress can come from many sources. Temperature fluctuations can cause the drywall to expand and contract creating stress that cracks the seams.

How do you know if joint compound is bad?

There is just no getting around the fact that all brands of drywall mud will decompose. When they do, they produce a very foul smell, and you can visually see the presence of black mold. Here is another illustration: In the above image it is easy to see the black mold forming on the side of the bucket.

How long does it take for thin coat of joint compound to dry?

How long does it take joint compound to dry? Under conditions of a temperature of 70° and 70% humidity, joint compound should dry in about 24 hours. Higher humidity and/or lower temperatures will slow drying time.

Should I worry about hairline cracks?

Severe – cracks up to 25mm wide could be a sign of structural damage and should be inspected and repaired by a professional. Very severe – any crack above 25mm in width indicates serious structural damage and will need major repair work, which could include underpinning and rebuilding.

Should joint compound be thinned?

Drywall mud, or joint compound, is applied in a thin finish coat and textured to give the walls more dimension. The mud comes as a thick paste in either a bucket or bagged in a box. It’s too thick to use for texturing as it is, so it first requires thinning with water.

How can you tell if a crack is structural?

As the name suggests, structural cracks occur because of poor construction sites, overloading or poor soil bearing.Telltale signs of structural cracks in your foundation are:

  1. Stair-step cracks.
  2. Cracks on foundation slabs or beams.
  3. Vertical cracks that are wide at the bottom or top.
  4. Cracks measuring 1/8″ in width.

Can you rehydrate joint compound?

Unfortunately you cannot re-wet drywall compound and get a usable product. It will break down in to a rough slurry, but the consistency will never be smooth enough to get a descent finish.

What happens if you paint over wet joint compound?

Before the pros paint walls, they fill holes and patch cracks with joint compound. But if you paint directly over the patched areas, the compound will suck the moisture out of the paint, giving it a flat, dull look; a problem called “flashing.” And those spots will look noticeably different than the rest of the wall.

What is the difference between drywall mud and joint compound?

Drywall mud, also called joint compound, is a gypsum-based paste used to finish drywall joints and corners in new drywall installations. It’s also handy for repairing cracks and holes in existing drywall and plaster surfaces.

How do you fix dry joint compound?

After the compound dries, it can be sanded smooth with sandpaper. If you leave a can or open container of spackling compound exposed to air long enough, it will harden and become too hard to spread. Don’t throw it out, however. Revive it with water.

Can I use smelly joint compound?

Yeah it does go bad. The life of it is about 2 to 6 months after it has been opened. Bare in mind that if you use smelly drywall compound thinking the smell will go away the answer is no.

Does joint compound have a shelf life?

The Shelf Life of Drywall Joint Compound. Shelf life: 12 months from production code date when stored properly. HOWEVER, 9 months is if the mud has been unopened, and strored in ideal conditions. The drywall mud will deteriorate much, much sooner if opened and stored in less than ideal conditions.

Can I still use moldy joint compound?

In truth, mold spores are ubiquitous in this world and will grow anywhere under proper conditions, i.e. continually moist conditions. Cured dry joint compound does not fit that situation at all. Also if you have mold in your compound just throw it away.

How thick can you apply joint compound?

Start by laying a thick bed of joint compound down the center of the seam. Then smooth it down to a consistent thickness of about 1/8 in. with your 5- or 6-in.

Will thick joint compound dry?

Will thick joint compound dry? Joint compound should generally be allowed to dry for 24 hours between coats and before sanding, painting or priming. High humidity levels and warm temperatures both increase drying times, however.

When can you paint over joint compound?

When can I paint over joint compound? Joint compound should generally be allowed to dry for 24 hours between coats and before sanding, painting or priming.

What happens if joint compound is too thick?

Generally the biggest prolem with appling ready mix j/c too thick is it will crack as it shrinks and dries. If it doesn’t crack it should be fine. I always try to apply a skim coat as thin as possible both to avoid any problems and to save on material . . It is also easier to control and have a level skim coat job.

Can I paint wet joint compound?

At the far end, drywall mud, also known as joint compound, needs to dry for 24 hours between each coat and before sanding, priming, and painting. The 24 hour drying time recommendation can be applied to nearly all factors.

Will paint fill hairline cracks?

For deeper hairline cracks, you may want to use a filler to fill up the cracks before applying a new layer of paint in the affected area. However, if an extensive area has been affected, you will need to scrape off the paint and then sand the entire area to even out the edges before applying a fresh coat of paint.

Can I dry joint compound with a hair dryer?

Answer: Yes you can use a hair dryer or a heat gun to dry the mud on a sheetrock repair faster. When drywall mud (or joint compound) dries it shrinks a little, and if you dry it too fast it can sometimes crack. This is fine and won’t hurt anything, but it does mean you will have to fill the crack with more mud.