QA

Quick Answer: Why Is My Schlage Lock Not Working

Check and Replace Batteries As mentioned, your Schlage keypad lock may not function correctly if the batteries are weak. Though most Schlage keypad locks come with a low battery indicator that notifies you when the batteries are low, it may happen unannounced sometimes—probably due to low-quality batteries.

Why is my Schlage lock not unlocking?

Restore Factory Settings to Fix Any Glitch Here’s how to do that: Step 1: Remove the battery cover and disconnect the battery. Step 2: On the keypad, press and release the Schlage button. Step 3: Now, within 10 seconds, reconnect the battery, press and hold the Schlage button until it lights green and the lock beeps.

Why did my Schlage stop working?

Your Schlage Connect Keypad may malfunction if the batteries are low. So if your keypad suddenly stops working, the first step to resolving this issue is to replace the batteries in your lock. So replace the batteries in your lock to see if that resolves the issue.

Why is my keypad door lock not working?

If the keypad buzzes twice after a code is entered and the door fails to unlock, this means the keypad is not communicating with the lock. A reset should fix this issue. If you find that the issue is the lock, try rebooting the lock first. To reboot the lock, remove one battery from the lock and replace it.

Why is my Schlage lock not working after battery change?

For the most part, your Schlage keypad lock may stop working if the batteries are low or completely drained. If your lock suddenly stops working, the first thing to do is replace the batteries and then try to operate it again. Also, check if the battery connector is disconnected and get it properly connected.

Why is my Schlage lock blinking orange?

Orange flashes indicates lock is in the middle of a programming sequence.

Why would my power locks stop working?

An inoperative power door lock can be caused by the switch, solenoid, wiring problem or mechanical problem within the linkage of the affected door. If all of the door locks are inoperative, start your diagnosis at the fuse box. Inspect the fuse that protects the door lock circuit to ensure it is not blown.

What happens if Schlage lock battery dies?

All Schlage electronic locks are battery operated, so they will continue to work during a power outage. If the battery is dead and you need to unlock the door, you can perform an emergency battery jump start.

How do you reset a Schlage keypad lock?

So first how to Reset Schlage Keypad lock? Disconnect the batteries. Press and hold the Outside Schlage Button. While holding the Outside Schlage Button, Reconnect the batteries. Release the Outside Schlage Button. To check that the lock was reset, press the Outside Schlage Button and enter one of the Default User.

How do you reset a Schlage lock?

Reset the Schlage lock by engaging the reset button if one is available, or by disconnecting the battery. Once the cover and housing are removed, if the button is there, simply press and hold it until the red light isn’t flashing anymore. Release it and wait until the lock resets itself and the light turns blue.

Why is my Schlage Lock blinking red?

The Schlage button flashes red continuously. What does this mean? The battery is dead. You will need to replace the battery immediately.

How long do batteries last in Schlage locks?

The Schlage Touch is powered by a 9V battery and because it is a standard electronic lock, the battery life will last two years with a low-battery warning that will alert you long before the battery is completely drained.

What kind of battery does a Schlage door lock use?

How do I change the batteries? The Schlage Connect™ Smart Deadbolt requires four new AA alkaline batteries, installed on the interior side of the lock. Remove the black battery cover on the interior side of the lock by sliding it up.

Why is my Schlage lock blinking yellow?

Flashing red X: The battery is critically low. Flashing yellow dot after entering a user code: The battery is low. Flashing inside Schlage button: The battery is low.

What does the Schlage button do?

Located on the outside of the door. Used to enter codes for programming and unlocking. The inside lever can be rotated at any time to retract the latch. The outside lever can be rotated at any time, but will only retract the latch when the lock is unlocked.

How do you open a Schlage lock with a dead battery from the outside?

How do you unlock a Schlage Control lock that has a dead battery? Touch a new high-quality alkaline 9-volt battery to the contacts below the bolt throw. Wait for 1 red light and then 3 green lights with 3 beeps. Present a valid credential. Rotate the bolt throw away from the door edge. Replace the batteries.

Is there a fuse that controls the door locks?

There are three primary components of the power door lock system that can fail, resulting in a useless power door lock: Blown fuse: A fuse is a low resistance resistor that creates overcurrent protection. When the actuator gets the signal from the power door lock switch, a small motor turns the gears.

Why is my driver side door not locking?

The key fob battery is dead: This is one of the most common reasons why your car door lock is not working. If your locks aren’t working, replacing the battery in the key fob could solve the issue. A fuse is blown: If one door doesn’t work, but others do, the problem could be a blown fuse.