QA

Question: How Long Should You Wait To Stain A New Deck

Depending on the wood and drying conditions, you should usually wait 4 to 8 weeks after installation before staining a deck.

How long should you wait to stain a new pressure-treated deck?

Pressure-treated lumber should be allowed to dry for at least six months before stain or any wood treatment is applied. A good test is to pour water on the boards. If it beads up, it’s still too wet. If the water soaks in, it’s ready for stain.

How do I know if my deck is dry enough to stain?

One way to clear way to check if the deck is dry enough for staining is by using a moisture meter. A moisture meter measures the amount of moisture within the wood itself. When using a moisture meter to inspect your deck lumber be sure to check in several spots along the board.

What happens if you stain a deck too soon?

Staining too soon can lead to the stain not being absorbed by the wood and result in a patchy and failed upgrade for your deck. Make sure the wood has dropped all of the excess moisture before trying to apply stain. Test to make sure that water is absorbed by the wood which ensures this drying process is done.

When Can I stain and seal a new deck?

The wood on a new deck needs to dry thoroughly before sealing or staining. If the wood came still wet with preservative, allow it to dry about 30 days before applying stain or sealer. To test the wood to see if it’s dry enough to stain or seal: Pour a little water on the wood.

How do I stain my new deck for the first time?

Stain New Deck Right Away. Apply a wood deck cleaner and thoroughly scrub and or pressure wash lightly. Neutralize with a wood brightener. These two steps will remove the mill glaze and “open” the wood pores. Apply a deck stain that is “thin” in viscosity.

How long should you wait before staining treated wood?

How long do you have to wait to stain pressure treated wood? Wait until the wood is completely dry. Depending on climate conditions, pressure-treated wood can take anywhere from a few weeks to a few months.

Can you pressure wash and stain a deck in the same day?

DPI Pressure Washing recommends you wait 72 hours following cleaning to stain your deck. Always inspect the wood before staining it. If you see moisture or some swellings still apparent in the fibers, wait another day or two. Remember that staining a wet deck will result in an uneven finish at best.

How many coats of stain do you put on a deck?

The general rule of thumb is to apply only as much deck stain as the wood can absorb. Typically this will be 2 coats, unless your dealing with extremely dense hardwoods which may only be able to absorb 1 coat of wood stain.

Do you have to power wash deck before staining?

Power washing a deck is a quick and efficient way to get it ready for painting or staining, but it isn’t a necessary prerequisite. In fact, in some situations, it isn’t even a good idea, because power washing can chip and gouge wood.

Should I stain deck boards before install?

As before, we recommend you do not stain new wood prior to installation. Instead, wait 3+ months after installation before staining new wood surfaces. This will allow the wood to weather, creating an ideal porous surface that will hold the stain better.

Can you stain treated wood right away?

Kiln dried pressure-treated lumber: Dry treated wood is ideal because you can confidently stain it right away with either oil- or water-based exterior stains. To recognize it, look for a tag or stamp that says KDAT (kiln-dried after treatment) or ADAT (air-dried after treatment).

How do you seal a brand new deck?

Applying Deck Sealer to a Wood Deck Step 1: Check the forecast. Step 2: Clear the deck. Step 3: Sand (if needed) Step 4: Remove debris. Step 5: Stir sealer. Step 6: Apply sealer. Step 7: Repeat & fine tune. Step 8: Let it dry.

Is it better to brush or roll stain on a deck?

You should use a roller brush or sprayer to apply a steady coat of quality stain, such as Olympic Elite stains or Olympic MAXIMUM stains. PRO TIP: Back brushing your stain will help the stain soak into your deck boards, allowing better, long-lasting results.

Is it better to spray or roll deck stain?

Rollers are a great option when you need to apply the stain faster, but they can be difficult to work with in hard-to-reach areas. Using a sprayer is a viable option too, but you need to make sure that the sprayer is set to low pressure and you’re spraying close to the wood.

Does pressure treated wood need to be stained?

So, even though the wood is treated, it is best to apply a stain–or at least a water repellent–as soon as your project is dry enough. The first tip for working with pressure-treated lumber is to let it dry before using it.

What happens if you don’t stain pressure treated wood?

The effects that can occur due to a lack of treatment are aesthetic in nature. After 6 months, the wood will start to lose its color and will begin to fade. Ultimately it will fade to grey or silver. This is where the wood begins to form small surface cracks or takes on a slightly scaly appearance.