QA

Question: How To Diy A Closet Rod And Shelf

How far should closet rod be from shelf?

A minimum of 10 inches is best, but it’ll depend on the size of your hangers. If there is a shelf above the rod, determine the vertical distance from the rod to the shelf; two inches should be suffice.

How do you support a closet rod?

Before installing a closet rod, it is best to place closet brackets in a position on the wall that allows for the most support. This will require a stud finder. Once wall studs have been located, closet rods and brackets can be screwed into the stud for optimal support.

What kind of plywood do you use for closet shelves?

The minimum thickness you need for shelves is 1/2 inch, but if you plan to load them with heavy items, use 3/4-inch plywood.

What is the standard height for a double closet rod?

If installing a double-rod closet system, mount the top rod 81-¾ inches above the floor and the lower rod 40-½ inches above the floor.

How much space should be between shelves?

The rule of thumb for spacing is 12 inches between each shelf but bump that up to 15 or 18 inches and you enhance that sense of exposure and accessibility. Length is where you’ll see the most variation.

How high do you hang a shelf?

How High Should I Hang My Shelf or Shelves? Like artwork, shelves should be hung at about eye level or about 4 to 5 feet from the floor. If you’re hanging the shelf above furniture, measure about 10 inches from the top of the desk or couch.

Do closet rods need support?

If your closet rod is longer than 48 inches, you will need support. However, regardless of how long the closet rod is, if you’re hanging heavier items such as winter jackets, then you will want support no matter what.

How much weight can a closet rod hold?

Aluminum Anodized Elite 1-5/16”: Up to 80 lbs. Stainless Steel 1-1/16”: Up to 95 lbs. Steel Polished Chrome Round 1-1/16”: Up to 110 lbs. Steel Polished Chrome Round 1-5/16”: Up to 170 lbs.

Is plywood good for closet shelves?

Plywood. Whether you are replacing old cabinet drawers or are starting a project from scratch, one of the most versatile and dependable closet shelving materials you can use is plywood. This type of wood is a terrific choice for closet shelves because it’s very strong and resistant to sagging and warping.

What wood do you use to build a closet?

A plywood sheet is the best choice for your DIY projects, because it’s lightweight, safe, and flexible. A Plywood closet is the best place to keep your wardrobe, because it’s durable, it’s strong, and it will last a very long time.

Can you use plywood for shelving?

Plywood is a popular choice in construction because of its strength and low cost. Stainable and paintable plywood are often used to make shelving, cabinets and furniture.

What do I need to build a shelf?

You’ll need: Shelf boards. The shelf boards should be at least 2cm 3/4″ thick. Supports for the shelf boards. Cleats (strips of wood) are easy and ideal for this unit. Two vertical support panels. These form the sides of the shelf unit. A top piece. A piece of hardboard for the back of the shelf unit.

How do you make a closet organizer from scratch?

Measure the Closet Space. Crafting your own DIY closet organizer is simple. Measure Pieces for Closet Organizer. You’ll use 3/4-inch plywood to make this closet organizer. Cut Shelf Supports. Cut the Shelves. Attach Shelf Support to Wall. Assemble the Central Unit. Position the Central Unit in the Closet. Install Long Shelves.

How much height do you need for double hanging?

When installing double rods, hang the top rod 80 inches from the floor and the bottom rod 40 inches from the floor. Leave at least 3 feet of space between the two rods. These systems usually work best for skirts, blouses, shirts or pants folded over a clothes hanger.

What is the average hanging space per person?

Aim for a minimum of 2.4m of wall space per person (without additional bedroom furniture). Allocate 600mm for the widest items you wish to hang, plus an extra 100mm for easy viewing. You’ll need a corridor of at least 800mm as your ‘walk-in’ space.

How many brackets do I need for a 36 inch shelf?

DETERMINE HOW MANY BRACKETS ARE NEEDED Of course, all shelves are different, but if your shelf is over 36” long, we suggest using more than 2 brackets.

How long can bookshelves be without sagging?

The eye will notice a deflection of 1/32 inch per running foot so that a fully loaded (70-80 pounds) bookshelf that is 3 feet wide, should sag no more than 3/32 inches. For most shelves made from 3/4 inch stock, a practical span is 30 to 36 inches.

How high up should a floating shelf be?

If you want to hang a shelf, artwork or a picture ledge on a wall, place it about 4 to 5 feet from the floor or at eye level. When you are hanging it above a sofa, though, measure and mark a spot that is around 10 inches from the top instead.

Where should I hang my floating shelves?

Bathroom Floating Shelves Hang open shelves in the empty wall space above the toilet or near the vanity to provide space to hold practical items, such as cosmetic brushes or extra hand towels, as well as decorative accessories like artwork and vases.

Where do you put floating shelves?

Go Perpendicular. Mix it up in the kitchen: Install floating shelves perpendicular to your countertops — it’s great for smaller nooks or spaces. This creative technique allows for the same amount of storage space as traditional, horizontal installation without adding bulk to the design.

How far can closet rod span without support?

NOTE: 48″ maximum width without support brackets. Heavy-Duty Closet Pole 1 Closet Pole Sockets 1 pkg.

How can I make my closet rod stronger?

Attach closet rod support brackets at various points along the closet rod. Use a stud finder to locate the studs in either the wall or ceiling. Drill pilot holes, using a drill and drill bit. Alternatively, use self-tapping wood screws and mount the bracket directly into the stud.

Do closet rods need to be in studs?

Basic Installation It should be placed in front of a stud so you can screw into the stud to give it support. The typical height of a closet rod is from 60 to 80 inches, and both brackets should be at the same height, or the hooks you hang from the rod will slide to one end.

Can I hang a closet rod in drywall?

You can hang a closet rod in the drywall in such a fashion that it holds your clothing without pulling out of the wall. In order to do so, it’s best to use shelf support style brackets. These brackets can be set at any point along the back wall of your closet.

Do closets usually have studs?

Closet shelves are usually anchored to the wall where the mounting screws can grab wall studs. If your walls are masonry, you likely don’t have studs at all. You’ll need the proper materials and methods to build a stud-free closet shelf.