Table of Contents
Where should closet rod brackets be placed?
Before installing a closet rod, it is best to place closet brackets in a position on the wall that allows for the most support. This will require a stud finder. Once wall studs have been located, closet rods and brackets can be screwed into the stud for optimal support.
Can you hang a closet rod in drywall?
You can hang a closet rod in the drywall in such a fashion that it holds your clothing without pulling out of the wall. In order to do so, it’s best to use shelf support style brackets. These brackets can be set at any point along the back wall of your closet.
How far should closet rod be from shelf?
A minimum of 10 inches is best, but it’ll depend on the size of your hangers. If there is a shelf above the rod, determine the vertical distance from the rod to the shelf; two inches should be suffice.
How long can closet rods go without support?
If your closet rod is longer than 48 inches, you will need support. However, regardless of how long the closet rod is, if you’re hanging heavier items such as winter jackets, then you will want support no matter what.
How do you hang a closet rod from the ceiling?
Draw a straight line on the ceiling at right angles to the joists using a yardstick or straightedge tool as your guide. Make the line the length of the closet rod you purchased for the project. Put the line at least 12 inches from the back wall of the closet to allow room to hang clothes hangers on the clothes rod.
Does a closet rod have to go into a stud?
It should be placed in front of a stud so you can screw into the stud to give it support. The typical height of a closet rod is from 60 to 80 inches, and both brackets should be at the same height, or the hooks you hang from the rod will slide to one end.
How much weight can a wooden closet rod hold?
Never put more than 25-pounds of clothing on one of these rods or it will fail. The motorized version works with a remote control and can hold up to 60-pounds of clothing per rod.
How much closet space do I need?
A clothes closet should have a minimum depth of at least 24 inches deep, so the clothes can clear the back wall. Shelves for women’s shoes should be spaced about 6 to 7 inches apart. Shelves for folded clothes should be placed around 12 inches apart.
How many brackets do I need for closet rod?
Adjustable Closet Rod 1 TM Page 5 TM NOTE: Recommended 16″ bracket spacing. Maximum 32″ bracket spacing. First, measure the width of your closet. Measure 11-1/2″ from the rear closet wall.
What is the standard depth of a closet rod?
Opt for a closet rod depth of at least 12 inches. You can avoid this clothing disaster by mounting the rod at least 12 inches from the rear wall of the closet. Keep in mind that the average closet has a depth of 24 inches.
Do closets usually have studs?
Closet shelves are usually anchored to the wall where the mounting screws can grab wall studs. If your walls are masonry, you likely don’t have studs at all. You’ll need the proper materials and methods to build a stud-free closet shelf.
How much weight can an average closet rod hold?
A 6-foot span of closet rod can hold certain amounts of weight, depending on its shape and what it’s made of. Six feet of oval aluminum anodized rod can hold 45 pounds. The same length of rod can hold 170 pounds if it’s made of 1 5/16-inch steel polished chrome.
How much weight can Rubbermaid shelving hold?
Total Weight Capacity: 350 lbs.
How much weight can the shelf in my closet hold?
For their closet shelving, you can typically expect to hold around 35 pounds per linear foot, unless you get the shelving with the ShelfTrack Hardware. Then, you can hold a very respectable 75 pounds per linear foot. If you get their Maximum Load Standard Shelving, you can expect to carry up to 600 pounds per unit.
How shallow can a closet be?
The standard minimum depth for a reach-in closet is 24 inches, but a closet intended to store coats or other bulky hanging items may need to be as deep as 28 inches. A closet less than 22 inches deep isn’t deep enough to allow hanging clothes.
What is a good master closet size?
A walk-in master closet should be a minimum of 7-by-10 feet, and preferably 100 sq. ft. for two users. That gives you space to line two or three walls with shelves, cubbies, and poles, and the elbow room to reach them easily.
What screws to use for closet shelves?
Yes you need to use screws. I would use 2 1/2-3″ deck screws. You need to go through 3/4″ of wood and 1/2″ of sheetrock, then into the stud at least as far. Your shelves will bow unless you put a center support.
How do you support closet shelves?
If additional support is needed to keep the shelves from sagging, either install a metal bracket in the center under each shelf, or glue and nail a piece of 1 x 2 to the front edge of each shelf.
What is the standard bedroom closet size?
A typical closet is approximately 24-inches deep. A walk-in closet should be at least 36- to 48-inches deep. The width of the closet ideally is half the width of the room, if not more. A standard 12-by-12 bedroom would ideally have a closet 6-feet wide by 48-inches deep.
How do you maximize a hanging space in a closet?
If most of your clothes are short hanging, add an extra closet rod to instantly double the amount of hanging space. Add-on, cascading and slim profile hangers are other good ways to save space. Finally, give yourself the benefit of drawers in your closet by using hanging sweater and hanging shoe organizers.
