QA

How To Install A Double Closet Rod

How far apart should double closet rods be?

When installing double rods, hang the top rod 80 inches from the floor and the bottom rod 40 inches from the floor. Leave at least 3 feet of space between the two rods. These systems usually work best for skirts, blouses, shirts or pants folded over a clothes hanger.

How do I add another closet rod?

Add-On Clothes Rod Here’s an easy way to add space for hanging clothes (or at least clothes that don’t require a tall space). Hang a second clothes rod from the upper rod with lightweight chain. Attach the chain to screw eyes directly or use S-hooks or carabiners.

How far should closet rod be from shelf?

A minimum of 10 inches is best, but it’ll depend on the size of your hangers. If there is a shelf above the rod, determine the vertical distance from the rod to the shelf; two inches should be suffice.

How long can closet rods go without support?

If your closet rod is longer than 48 inches, you will need support. However, regardless of how long the closet rod is, if you’re hanging heavier items such as winter jackets, then you will want support no matter what.

How do you support a closet rod?

Before installing a closet rod, it is best to place closet brackets in a position on the wall that allows for the most support. This will require a stud finder. Once wall studs have been located, closet rods and brackets can be screwed into the stud for optimal support.

How do you hang a closet rod from the ceiling?

Draw a straight line on the ceiling at right angles to the joists using a yardstick or straightedge tool as your guide. Make the line the length of the closet rod you purchased for the project. Put the line at least 12 inches from the back wall of the closet to allow room to hang clothes hangers on the clothes rod.

How do you hang a closet rod on drywall?

To securely install a closet rod in drywall: Measure the size of the space where the closet rod will go. Buy a closet dowel rod and cut it to length. Choose a wall bracket that can be positioned so that you can screw it into wall studs. Mark the place where your first bracket will be installed. Drill pilot holes.

How do you double out a closet space?

7 Genius Ways to Double Your Closet Space Add a Second Closet Rod. Use the Back of the Closet Door. Ditch Plastic Hangers. Add Shelves Above a Closet Rod. A Seasonal Shift. Double Up on Hangers With Soda Pull Tabs. Invest in a Closet System.

How do I add more storage to my closet?

10 Ways to Increase Your Closet Storage Space Add Hanger Space. One quick and easy way to store clothing, especially nice pieces, is on hangers. Install Shelving. Get Shoes Squared Away. Install Permanent Shelving. Organize That Jewelry. Add Wall Hooks. Organize with Bins. Make a Place for the Worn Clothes.

How do I add more closet space?

Instead of cutting your wardrobe in half, use these 19 small closet ideas to create twice as much space as you had before. Get a Clothing Rack. Hide Items Behind Glass Doors. Add Storage Under Clothes. Re-Organize Seasonally. Utilize Modular Shelving. Install Task Lighting. Install Sliding Doors.

How much weight can a wooden closet rod hold?

Never put more than 25-pounds of clothing on one of these rods or it will fail. The motorized version works with a remote control and can hold up to 60-pounds of clothing per rod.

Does a closet rod have to go into a stud?

It should be placed in front of a stud so you can screw into the stud to give it support. The typical height of a closet rod is from 60 to 80 inches, and both brackets should be at the same height, or the hooks you hang from the rod will slide to one end.

Do closets usually have studs?

Closet shelves are usually anchored to the wall where the mounting screws can grab wall studs. If your walls are masonry, you likely don’t have studs at all. You’ll need the proper materials and methods to build a stud-free closet shelf.

How many brackets do I need for closet rod?

Adjustable Closet Rod 1 TM Page 5 TM NOTE: Recommended 16″ bracket spacing. Maximum 32″ bracket spacing. First, measure the width of your closet. Measure 11-1/2″ from the rear closet wall.

How thick should a closet rod be?

A closet-rod dowel is usually between 1 1/4 inches to 1 3/8 inches in diameter. This diameter allows for plenty of hanging strength. It resists breakage, and will not bend when properly supported.

How deep is an average closet?

The standard minimum depth for a reach-in closet is 24 inches, but a closet intended to store coats or other bulky hanging items may need to be as deep as 28 inches. A closet less than 22 inches deep isn’t deep enough to allow hanging clothes.

What is the strongest drywall anchor?

Traditional metal toggle bolts are the strongest of the bunch, but they’re not the simplest to install because they require drilling a hole that’s approximately three times wider than the diameter of the bolt (necessary to insert the anchor).

How do you install drywall anchors?

How To: Use Drywall Anchors STEP 1: Choose the right drywall anchor. STEP 2: Twist the self-drilling wall anchor into drywall with moderate pressure. STEP 3: Turn the drywall anchor in until the lip is flush with the wall. STEP 4: Attach your rack or shelf to the wall by screwing into the drywall anchor.

What is a dual closet?

A double reach-in closet with deep sides, or a shallow closet with double doors, has a more complex layout and door arrangement than a single-door closet, and it introduces a couple of additional design challenges, according to Organized Living.

How much does it cost to extend a closet?

However, most homeowners spend an average of only $358 to remodel their closet, but prices range from $644-$1,275 on the high end. A small reach-in closet will cost less than a large walk-in closet.Closet remodel cost: National average cost $358 Low-end cost range $113-$271 High-end cost range $644-$1,275.

How much does it cost to add a closet?

The cost to build a closet averages $2,010, with a typical range between $1,079 and $2,958. Prices depend primarily on size. Walk-ins are $750 to $3,500, compared to $250 to $1,500 for a reach-in. Solid wood doors and other high-end additions can run the most.