Table of Contents
How do you support a closet rod?
Before installing a closet rod, it is best to place closet brackets in a position on the wall that allows for the most support. This will require a stud finder. Once wall studs have been located, closet rods and brackets can be screwed into the stud for optimal support.
Do closet rods need support?
If your closet rod is longer than 48 inches, you will need support. However, regardless of how long the closet rod is, if you’re hanging heavier items such as winter jackets, then you will want support no matter what.
How can I increase hanging space in my closet?
10 Ways to Squeeze a Little Extra Storage Out of a Small Closet Double your available hanging space by adding an extender rod. Store clothes on shelves more efficiently with shelf dividers. Double your shelf space with under shelf baskets. Hooks are your very best friend.
How many brackets do I need for closet rod?
Adjustable Closet Rod 1 TM Page 5 TM NOTE: Recommended 16″ bracket spacing. Maximum 32″ bracket spacing. First, measure the width of your closet. Measure 11-1/2″ from the rear closet wall.
What are closet rods made of?
Strength: HARDWARE DECOR offers closet rods constructed of three different materials: steel, stainless steel and aluminum. Closet rods made from steel are chrome plated. In addition to being the strongest, they are also very resilient.
How far should closet rod be from shelf?
A minimum of 10 inches is best, but it’ll depend on the size of your hangers. If there is a shelf above the rod, determine the vertical distance from the rod to the shelf; two inches should be suffice.
How deep should closet rod be?
Opt for a closet rod depth of at least 12 inches. You can avoid this clothing disaster by mounting the rod at least 12 inches from the rear wall of the closet. Keep in mind that the average closet has a depth of 24 inches.
How much weight should a closet rod hold?
A 6-foot span of closet rod can hold certain amounts of weight, depending on its shape and what it’s made of. Six feet of oval aluminum anodized rod can hold 45 pounds. The same length of rod can hold 170 pounds if it’s made of 1 5/16-inch steel polished chrome.
How much does it cost to extend a closet?
However, most homeowners spend an average of only $358 to remodel their closet, but prices range from $644-$1,275 on the high end. A small reach-in closet will cost less than a large walk-in closet.Closet remodel cost: National average cost $358 Low-end cost range $113-$271 High-end cost range $644-$1,275.
How much space do hanging clothes need?
Shelves for folded clothes should be placed around 12 inches apart. 84 inches is considered the minimum height to hold double hanging rods. Blouses and shirts will take up about 1 inch of rod space, pants and skirts around 1 1/4 inches and dresses, jackets and suits about 2 to 3 inches.
How much weight can a screw hold in drywall?
Screws Help Hold the Weight on Drywall Using several screws that are #4 or larger into a wall stud can hold up to 100 pounds or more. You want to make sure they can go at least 1 inch into the stud to be secure. If you are hanging a shelf that will have books on it, this is the perfect hardware.
How much weight can drywall anchors hold?
Toggle bolts are the types of drywall anchors that can support up to 50 pounds, while steel hollow-wall anchors have a drywall anchors weight limit of up to 100 pounds.
Is it possible for a wall to have no studs?
Can a wall not have studs? The answer is no—a wall must have studs to ensure structural support. However, there are some variations in how a wall can be framed and where you will locate studs.
Can you hang closet rod with drywall anchors?
To securely install a closet rod in drywall: Drive screws into the wall stud or drywall anchor, securing the bracket in place. Repeat this process for additional brackets, making sure they are level with the first bracket. Set your closet rod in place and use it to hang your clothing.
Does a closet rod have to go into a stud?
It should be placed in front of a stud so you can screw into the stud to give it support. The typical height of a closet rod is from 60 to 80 inches, and both brackets should be at the same height, or the hooks you hang from the rod will slide to one end.
What kind of pipe do you use for a closet rod?
A length of galvanized steel or black iron pipe makes an unassuming and easily deployed closet rod. You’ll need a custom-cut length of pipe, which you can get at any hardware store. The service technician can also rethread the cut end for you so you can screw a threaded flange onto each end.
Are round or oval closet rods better?
Holds Clothes Better The oval pole allows the hanger to twist on the pole as there is very little pole surface contacting the hanger. The round pole is bit larger and holds the clothes more in line with one another. Your closet professional should have both to show you so you can decide.
Can you use a shower rod in a closet?
Yes, you can use a shower Curtain Rod for a closet. Since most of the shower openings are akin to the length of the tub, the rod just does not fit into the rack brackets. Well, you don’t need to worry as many curtain rods are adjustable. Adjust your curtain rod to fit into your rod holders.
How long is a hanger?
Standard-sized adult hangers measure 17-18 inches. Our over-sized hangers measure 19″ wide, giving more support to heavy coats or larger jackets.
What is the average hanging space per person?
Aim for a minimum of 2.4m of wall space per person (without additional bedroom furniture). Allocate 600mm for the widest items you wish to hang, plus an extra 100mm for easy viewing. You’ll need a corridor of at least 800mm as your ‘walk-in’ space.
How wide is a coat hanger?
Coat hangers are typically 19 inches wide — add a heavy coat and it’s cramped at 24 inches. Coat closets should have a minimum of 28 inches of depth — 30 inches is ideal — to prevent sleeves and bulky coats from interfering with the closet door.
