QA

How To Stain Deck

Stain the Deck Boards Don’t stain yourself into a corner. Stain the deck boards using a paint pad applicator. Apply one coat of stain in long, even strokes. Use a paintbrush to stain between cracks and in any problem areas. Once you’re finished, clean the brushes and paint tray.

Is it better to brush or roll stain on a deck?

The agitation and friction caused by a paint brush will cause the wood to absorb more stain. So if you are spraying or rolling the stain, always back-brush it in with a brush while the stain is still wet; you’ll achieve much better penetration in to the wood.

What are the steps to staining a deck?

How to Stain a Wooden Deck First Steps. When staining your deck, first make sure it is clean and dry. Maintenance. Step 1: Sweep the Surface. Step 2: Creating a Plan. Step 3: Protect Exterior Walls. Step 4: Add Stain to Tray. Step 5: Attach Pole to Paint Pad. Step 6: Stain Deck With Paint Pad.

What is the easiest way to apply deck stain?

Apply the deck stain with a natural bristle brush. A roller gets the job done faster, but brushing helps force the stain into open grain and pores. It’s especially important to work stain into butt joints where two boards meet.

How do I stain my deck for the first time?

How To Prep for New Smooth Wood: Install wood and let weather for 1-12 months. After the waiting period, you should use a wood cleaner and a wood brightener. Let the wood dry for a few days after the cleaning. Apply 1 Coat Only of the stain! Be prepared to apply a maintenance coat in 12-18 months.

How many coats of stain should you put on a deck?

The general rule of thumb is to apply only as much deck stain as the wood can absorb. Typically this will be 2 coats, unless your dealing with extremely dense hardwoods which may only be able to absorb 1 coat of wood stain.

Should you pressure wash deck before staining?

There is a common misconception that just pressure washing a deck prior to staining is all you need to do in order to prep your deck for stain. Pressure washing can help, but if you want your stain to last, using a good deck cleaner and brightener on the deck prior to pressure washing will provide you the best result.

Do you seal a deck after staining?

Most of the time, stains also contain a protective sealant. It’s a good idea, though, to re-seal your deck (or check that it needs to be re-sealed) once a year. Water-based stains can adhere to water or oil-based coatings already present on the wooden surface.

What if it rains after I stain my deck?

If it rains within 48 hours after you apply the stain, the water will soak into the wood pores and try to displace the stain. This will result in a splotchy surface rather than an even tone. If it rains right after you apply the stain, the stain will peel and flake off.

Can you use a roller to stain a deck?

A paint roller can be used to roll stain on. A wide 18-inch roller may work well for staining a few fence or deck boards at a time but a mop or stain pad will hold more stain lessening the amount of time you have to dip back into the stain bucket.

Do I need to sand my deck before staining?

Once dry, these wood fibers can remain raised and may cause splinters. For this reason, light but thoroughly sanding your wood deck is a necessary step before staining or sealing. This crucial step will ensure that your refinishing job gives great results.

When should I stain my deck for the first time?

You can stain a new deck immediately after installing your deck, but this is not the best time to do it and here’s why: the lumber is still too wet. The best time to stain a new deck is 3 to 12 months after installing it.

What temperature should it be to stain a deck?

Helpful Stain Application Tips Apply stain only at the proper temperature. For most stains, 70 degrees Fahrenheit is the optimum, with the safety range from 50 to 90 degrees Fahrenheit.

How long after I stain my deck Can I walk on it?

In most cases a full body stain or acrylic deck finish will be dry to touch within an hour in dry, hot weather. After two hours you could take a chance and walk on it with shoes, though I’d recommend barefoot. After about 4 hours you should be able to safely walk on your deck.

How do I know when my deck is dry enough to stain?

3. Another way of checking if your wood is ready for stain is to pour a little water on the wood. If the water beads up, the lumber still too wet to be stained or painted. If the water is absorbed into the wood easily, it’s ready to be sealed or stained.

Do I have to wait 4 hours between coats of stain?

For a deeper color and sheen, wait one hour and apply a second coat. After 1 hour, the surface is dry to the touch. Wait overnight before subjecting the wood to normal use. For a deeper color and sheen, wait one hour and apply a second coat.

How do I know if my deck needs a second coat of stain?

A good rule of thumb is to lightly touch the portion that has been stained. If it feels tacky to the touch (a little sticky and not wet) then you can apply the second coat.

How long should you wait to put on a second coat of stain on a deck?

If a second coat is required, wait 4 hours between applications. Depending on temperature and humidity, allow 24 – 48 hours of dry time before using your beautifully restored deck or porch.

How many dry days do you need to stain a deck?

New wooden decks should always receive a coat of paint or stain. Generally, all new decks should dry out for at least 30 days before stain or paint is applied. Although a finish can be applied immediately after construction, more work is involved, so it’s best to let the wood fully dry before finishing.

Is it better to sand or power wash a deck?

Splintered, cracking, or just plain rough wood should be sanded first, then pressure washed to open the wood’s pores and allow penetration of the stain. Deeply grooved wood that has mold, moss and other growing things filling the cracks will need treatment with a deck and siding cleaner.

Do you sand or clean deck first?

You need to clean the deck after sanding to remove all the dust and open up the pores in the wood that get clogged when sanding.