QA

What Is The Roof Rake

A roof rake is an excellent way to clear excess snow from the top of your home. Comprised of an extending handle and a blade, these simple tools allow you to remove snow from your roof while keeping both feet on the ground. Scoop blades are designed to be placed at the top of the roof and dragged towards the ground.

What is the difference between a rake and a gable?

An Eave is defined as the edge of the roof that overhangs the face of a wall. This is the portion of the roof that protrudes beyond the side of a house or building. In contrast, a Gable (or Rake) is the overhang of a building that occurs on the side that is topped by a gable roof.

What is the difference between eave and rake?

Eaves—The lower edge of a roof (often overhanging beyond the edge of the house). Rake—The slanting edge of a gable roof at the end wall of the house. Ridge—The horizontal line at the top edge of two sloping roof planes.

What is the rake area of a roof?

A rake is the sloped part of the end of the gable in gable roofs, or the trim for gables. Rakes are another area on the exterior of your home (in addition to soffits and fascia) that can be customized to match the trim of your home. They can be intricate or simple in design, flat or sloped.

Should I use a roof rake?

If your roof is flat or has a low slope, roof raking is definitely a must once the snow gets to be about 6 inches or more. If your roof has a higher pitch, it’s still something to consider, especially if the snow is wet and heavy and it is building up.

What is a rake gable?

Also known as rake trim, gable trim is a finishing piece of metal flashing used along the edges of a metal roof line where the edge of the metal roof panel meets the endwall panels.

Is rake edge necessary?

Without a drip edge, water may end up beneath the shingles and may cause damage to various parts of the home. Though your home may not have originally had a drip edge installed, drip edges are now required by most building codes across North America to protect homes from damage.

What is roof overhang called?

Soffit: The underside of the eaves, or roof overhang, which can be enclosed or exposed.

What is a rake overhang?

The American Wood Council’s 2012 Wood Frame Construction Manual defines rake overhang as “The horizontal projection of the roof measured from the outside face of the gable endwall to the outside edge of the roof.” Section 2.1. 3.4.

What is an eave in roofing?

An eave is the edge of the roof that overhangs the exterior siding. Parts of an eave include the soffit, which is the underside of your roof’s eaves, and the fascia, the vertical facing board.

What is the rake from?

The Rake is a monster in the online horror fiction genre, creepypasta. It is depicted as an unusually tall, hairless, pale, humanoid creature who generally crouches or crawls on all fours.

What is a house rake?

A roof rake always angles down. Terms are used to break down the various areas of a roof and a “rake” is one of many roof sections. The rake is not exactly on the roof. It is a term that describes the sloped sides of a gable end. The rake can be flat with no overhang, or it can overhang the gable end like an eave.

What is rake flashing?

Gibraltar’s Gable Rake Flashing is a professional trim product designed to cover the exposed ends of metal roofing panels. Gable Rake Flashing is applied over metal panels along the rake edge to direct rain water away from the fascia.

Does roof rake damage shingles?

Use a snow rake for pitched roofs (available at most hardware stores) to remove snow from your roof. Start from the edge and work your way into the roof. Try to shave the snow down to a 2 or 3 inches on the roof instead of scraping the roof clean, which will risk damage to your shingles or other roof covering.

Are roof rakes safe for shingles?

Never, never use a roof rake or try to shovel snow off a slanted roof. It will do no good, will not cure ice dams, is extremely hazardous, and can harm asphalt shingles, and in your case, slate shingles. And it will take away snow that is a natural insulator as long as it stays on your house.

Do roof rakes prevent ice dams?

Using a long-handled roof rake to removing the snow from at least at lower 4 feet of roof edge can help prevent ice dams from forming. This is the only safe way to remove snow from a roof; never get onto a roof to remove snow in the winter.

What are rake rafters supported by?

what is a gable/rake lookout? framing member fastened to a common rafter and cantilevered outward over the gable rafter to support the rake rafter. where are the gable studs? vertical studs extending from the cap plate on the wall to the underside of the gable rafter.

What is a raking truss?

Raking Truss: This is a gable-end truss, which has the top chord lowered, by the width of the top chord, to allow outriggers to be placed over the top to support the barge and eaves.