Table of Contents
There are no strict rules to follow when choosing whether to select a knob or a pull or both. One preference is to use knobs for all doors and pulls for all drawers. For any large door such as a pantry and any pull-out door (including pull-out base pantries or trash pull-outs), use a pull.
How do you decide on pulls or knobs?
Small Drawers that are 12” or less typically work best with a pull that is 3” to 4” long or a knob that is 1” in diameter. Large Drawers that are 30” to 48″will require a pull that is longer than 8″ or a knob that is 1″ in diameter or greater. Using two pulls or knobs for a large drawer also works great.
Can you mix knobs and pulls on kitchen cabinets?
Yes. You can mix knobs and pulls. It’s recommended to use pulls for cabinets that are higher up and knobs for lower style cabinets. Lower drawers that slide are typically fitted with a pull handle.
Are handles or knobs better?
Door knobs do not naturally give as much grip as lever handles. If doors are to be used by those that do not have much grip such as children and the elderly a door knob may make it difficult to operate that door. This is very relevant in public use buildings where we will always advise lever handles over door knobs.
Do cabinets look better with hardware?
Cabinet hardware should match existing metalwork such as your sink faucet, or appliances. This creates a unified look in any kitchen or bathroom. There is a time and place to mix and match finishes… but not with hardware.
What hardware looks good on white cabinets?
Hardware on white cabinets will stand out and steal the show, so it’s a great opportunity to go bold! If you have warm tones, go with gold, black, or bronze hardware. If you have a cold grey tone, then silver, pewter, black, and stainless steel hardware will work.
Where do knobs go on Shaker style cabinets?
Center of the Stile: Knobs and pulls can be placed halfway up the stile of your Shaker door. Keep in mind you’ll want to be able to reach the handles, since they will be placed higher up along the stile. Just Above or Below the Corners: Place the knobs or pulls 2” to 3” from the lower or upper corner.
Should my kitchen cabinet pulls match my faucet?
Most of the time the kitchen faucet should match cabinet hardware!” But, sometimes strategically placing different metals next to each other can work for you, add interest or even make a statement.
Should cabinet pulls be vertical or horizontal?
Pulls should be placed horizontally on drawers. For small drawers (less than 24” wide) center the knobs or pulls in both directions. Just like on larger drawers, pulls should be placed horizontally. Knobs and pulls can also be placed centered at the very top of the drawer panel, where the drawer rail begins.
Can I use different size pulls on kitchen cabinets?
One of the most popular options is to pick one size and use it throughout your cabinetry. There is no right or wrong size to choose, but we do recommend choosing pulls that have at least a 3-3/4″ center to center (the distance between the screw holes).
Should you put handles or knobs on kitchen cabinets?
Should I use knobs or pulls on kitchen cabinets? Whether you should use knobs or pulls for your kitchen cabinets is up to personal preference. Knobs can be the more comfortable option for cabinet doors because your hand rotates naturally as you open them.
What color knobs gray cabinets?
Silver hardware is the most common with grey cabinets as it can look sleek and refined. Nickel, chrome and stainless steel also provide that metallic detail that can pop against your cabinets.
Is gold hardware going out of style?
Gold flatware, gold fixtures and gold cabinet hardware have been trending recently, but this style of the moment is soon to be out. If you’re remodeling a bathroom or kitchen, consider sticking with timeless chrome or nickel fixtures to avoid making your home look dated.
What size should cabinet pulls be?
Determine Size While there is no set rule, we generally recommend that the pull length is approximately 1/3 of the cabinet or drawer width. Small Drawers that are 12” or less typically work best with a pull that is 3” to 4” long or a knob that is 1” in diameter.
Should cabinet hinges be painted?
This can be especially helpful if you’ve got old hinges in a funky, outdated color. But don’t just take a paintbrush to those hinges. Hinges painted with regular paint will scuff over time, leaving an eye sore. Instead have your hinges powder coated to match your cabinets.
How do you measure for cabinet pulls?
To accurately measure existing fixing centers, open your kitchen door or drawer and measure the distance between the center of each screw. This measurement should be used when specifying your new handles.5 days ago.
Where do pulls go on drawers?
When it comes to cabinet pulls placement for drawers under 24”, pulls are most often centered and installed in the middle of the drawer panel. This creates a really clean + high touch finishing look for your cabinetry. Like with knobs, if the drawer is 24” or wider you can add a second pull.
Where do you put cup pulls on drawers?
Cup Pulls: Cup pulls are only ever used on drawers, and I like to center them in the middle of the drawer slab. If you have a 5 piece drawer (top and bottom rails, inside panel, and side rails) you want to make sure the hardware itself will fit (centered) in the middle panel before purchasing and installing.
Should kitchen handles be vertical or horizontal?
The universal rule is that handles are placed vertically on doors and horizontally on pull-out drawers. Stand in your new kitchen and hold your handles against the drawers and cabinet doors to try out different heights and positions for each of them.
