QA

Quick Answer: Where To Put Drawer Pulls

Most drawer pulls are centered on the drawer fronts, but if the cabinet you’re working on has two or three drawers the same size and one larger one at the bottom, install the bottom knob (or pull) higher than the center of that drawer front. Install it so all the knobs on the cabinet are spaced evenly.

Where do pulls go on drawers?

When it comes to cabinet pulls placement for drawers under 24”, pulls are most often centered and installed in the middle of the drawer panel. This creates a really clean + high touch finishing look for your cabinetry. Like with knobs, if the drawer is 24” or wider you can add a second pull.

Do drawer pulls go in the center?

As far as the height of your drawer hardware, the classic choice is to center them vertically. With multiple drawers stacked on top of each other, choosing this placement makes each knob a little lower and harder to reach.

How far apart should drawer pulls be?

There is no right or wrong size to choose, but we do recommend choosing pulls that have at least a 3-3/4″ center to center (the distance between the screw holes). This size looks pleasing on most cabinets, while still being large enough to grip comfortably. 5″ pulls are also an excellent choice.

Where do you put pulls on Shaker cabinets?

Center of the Stile: Knobs and pulls can be placed halfway up the stile of your Shaker door. Keep in mind you’ll want to be able to reach the handles, since they will be placed higher up along the stile. Just Above or Below the Corners: Place the knobs or pulls 2” to 3” from the lower or upper corner.

Where should pantry cabinet pulls be placed?

Pulls are another versatile option that can be installed on both cabinets and drawers. For both upper and lower cabinets, the pulls should be installed vertically 2 ½ – 3 inches in from the corner of the door. For drawers, they should be installed horizontally in the center of the door.

Where do knobs go on vanity drawers?

For standard drawers, the correct cabinet knob placement is typically with knobs centered vertically, so they will be in the center of the panel. For extra deep drawers, you may install knobs centered in the top third of the drawer or on the top rail if you prefer.

Should kitchen handles be vertical or horizontal?

The universal rule is that handles are placed vertically on doors and horizontally on pull-out drawers. Stand in your new kitchen and hold your handles against the drawers and cabinet doors to try out different heights and positions for each of them.

How do you install drawer pulls evenly?

Most drawer pulls are centered on the drawer fronts, but if the cabinet you’re working on has two or three drawers the same size and one larger one at the bottom, install the bottom knob (or pull) higher than the center of that drawer front. Install it so all the knobs on the cabinet are spaced evenly.

Are cabinet handles supposed to be centered?

Where to Place Pulls on Cabinet Doors. On tall upper cabinets with a center rail such as tall linen cabinets or pantry cabinets, knobs and pulls should be centered horizontally on the stile and 2-1/2” up from the bottom of the cabinet door.

Where do handles go on cabinet doors?

When it comes to installing cabinet door handles (either knobs or pulls), they are always placed on the opposite side from the door hinges. You’ll specifically want to place them anywhere between 1” and 4” from the top or bottom edge of the door.

How do you measure for drawer pulls?

The length of the pull is important because you want it to be proportional to the size of your cabinet or drawers. We recommend a pull that is no longer than one-third of the total cabinet door height and no longer than one-half of the total drawer width.

What size pulls for 30 inch drawers?

Small Drawers that are 12” or less typically work best with a pull that is 3” to 4” long or a knob that is 1” in diameter. Large Drawers that are 30” to 48″will require a pull that is longer than 8″ or a knob that is 1″ in diameter or greater. Using two pulls or knobs for a large drawer also works great.

How do you decide between knobs and pulls?

There are no strict rules to follow when choosing whether to select a knob or a pull or both. One preference is to use knobs for all doors and pulls for all drawers. For any large door such as a pantry and any pull-out door (including pull-out base pantries or trash pull-outs), use a pull.

Where should cabinet handles be placed?

Cabinet knobs are placed opposite of door hinges. On wall cabinets, knobs are usually placed 2-1/2” to 3” from the bottom corner of the door. On base cabinets, they are placed 2-1/2” to 3” from the upper corner of the door. If your drawer is 24” or wider, you may choose to place a second knob.

Where should I place my appliance pulls?

Pulls are another popular hardware option that can be installed on both cabinets and drawers. The placement of the pull should be vertical and 2 ½ – 3 inches in from the corner of the door on both upper and lower cabinets. For drawers, pulls are installed horizontally in the center of the door.