QA

Question: What Size Wood For Deck

For the deck surface, you can use 2x4s, 2x6s, or 5/4x6s. The 5/4 decking (pronounced “five-quarter”), available in cedar and pressure-treated fir, is 1 inch thick and 5-1/2 inches wide with rounded edges that make for a splinter-free surface.

What is the best size wood for decking?

Select 5/4×6 inch deck boards to fasten in a perpendicular pattern to joists spaced 12” or 16” on-center (OC), or diagonally on 12” OC joists. Use 2×6 planks for 16” or 24” OC joists, or if running diagonally to 16” OC joists. For high traffic decks, 2×6 planks offer a more solid and safer surface.

Should I use 2×4 or 2×6 for deck?

If you use 2x4s for deck joists, it may cost more money and work in the long run. The material costs more than if you purchase 2x6s because the 2x4s can’t span as far, and you must create more beams and footings for support. You also can’t include guardrails and stairs with 2x4s as your support.

What is the standard size for deck boards?

Deck boards are typically 12 or 16 feet long, roughly 5-½ inches wide and about an inch thick – though specific dimensions can depend on the style of board you choose. Composite decking can come with two bottom profiles.

Should I use 2×6 or 2×8 for deck?

For upper-level decks, 2×10 is recommended as the minimum size to use for strong guard post connections. 2×6 joists should only be used on ground-level decks that do not require, and will not provide for, any guards. Most decking is not strong enough to support longer spans than 16″.

Can I use 1×6 for decking?

Never use 1×6 or 5/4×6 material in close to ground applications. Spacing between boards: You must allow space for your deck boards to expand when they take on moisture, as they will inevitably do when exposed to wet weather, rain or high humidity.

Is 4×2 OK for decking?

4 x 2 Timber Rail / Joist. These decking joists are the most common sized framing timber for decking. They provide a solid structure for fixing your decking boards too. When making your decking frame you should use a 400mm spacing between your timber joists.

Can I use 2×6 for deck boards?

Wood decking is commonly available in 2×6 and 5/4 x 6 profiles. 5/4 x 6 is produced specifically for decking and is milled with a radius edge or bull nose. 2×6 is thicker and is stronger, but is also more expensive. Spacing between deck boards provide a few critical functions.

What lumber Do I need to build a deck?

The three common choices when it comes to wood decks are redwood, cedar and pressure-treated wood that can be made of various types of wood species. Redwood and cedar are both naturally insect and rot resistant and have a natural look, but each has its own inherent issues.

How thick should decking boards be?

Most composite brands have the same thickness, but softwoods and hardwoods will range from 1″ to 2″ thick for decking. Softwoods should be at least 1 1/4 inches thick for a 16″ on center span. 2 inches thick will allow for a 24″ on center span.

How many deck blocks do I need for a 12×12 deck?

Calculating Out How Many Deck Blocks for a Floating Deck Deck Dimension Square Feet of Deck Number of Deck Blocks 12″ x12″ Supporting 2000 lbs 8×8 64 4 8×10 80 4 10×10 100 4 10×12 120 6.

Can I use 2×8 for deck joists?

2×8 for joists will be fine, with 16″ OC. Should use 2×10 for beams but 2×8 will be fine as well. If you are worried you can triple the 2×8 for the beams but double will be sufficient. You should put the beams at 7 and 14 feet out from the house, with the piers you should do 3 per beam with spacing of 1, 7, 13.

How many decking boards do I need for a 10×10 deck?

For a 10×10 square deck, you would therefore need twenty-two 10′ deck boards. Dimensions for deck boards can vary depending on the look you want and the deck board type you use. However, the most common is a 5/4” thick by 6” wide deck board of any length.

What is a 5 4 deck board?

5/4″ decking is thinner than 2×6 boards. Both with a deceptively different material thickness. 2×6 Deck Boards actual Dimensions 1.5″ x5. 5.” 5/4 Decking Actual Dimensions 1″ x 5.5.”.

How far can a 2×8 span for a deck?

Depending on various factors, the maximum span for a 2×8 floor joist is 16′ 6”. The maximum span for roof rafters is 23′ 9”. For headers, the maximum span is 11′ 2”. Finally, a single deck beam has a maximum span of 5′ 11” and double maxes out at 8′ 9”.

How far can a 2×8 span without support?

Based on different manufacturers’ specifications, the maximum span a 2×8 LVL is from 12′ to 15′. Spans are also affected by the species of wood used in the manufacture of the laminated joists, with western woods edging out eastern woods in unsupported span distance.

Can I use 2×8 for deck boards?

Q: Can I use 2×8 treated lumber as deck boards? A: No, that’s a not a good idea. Lumber wider than 6 inches should not be used as a flat surface. Wide, flat boards have a tendency to pool rain water, which can lead to cupping problems.

How thick is a 1×6 deck board?

Nominal vs. Actual 1x Lumber 1×6 3/4 x 5-1/2 1×8 3/4 x 7-1/4 1×10 3/4 x 9-1/4 1×12 3/4 x 11-1/4.

Can you use 1 inch boards for a deck?

The deck board thickness of all TimberTech Multi-Width Decking is 1”, making these boards ideal for builds with standard 16” joist spacing (but unsuitable for commercial applications with 24” spacing).

Should deck boards have a gap?

When using wood decking, you want a gap of at least 1/8 of an inch after your decking has dried out. If you’re using decking that’s already been dried out, you can leave a 1/8-inch gap when you install. Many decks will use “green” wood, or wood that hasn’t been dried down or kiln dried.