QA

Quick Answer: Where Should Drawer Pulls Be Placed

Pulls should be placed horizontally on drawers. For small drawers (less than 24” wide) center the knobs or pulls in both directions. Just like on larger drawers, pulls should be placed horizontally. Knobs and pulls can also be placed centered at the very top of the drawer panel, where the drawer rail begins.

Where do you put drawer pulls?

When it comes to cabinet pulls placement for drawers under 24”, pulls are most often centered and installed in the middle of the drawer panel. This creates a really clean + high touch finishing look for your cabinetry. Like with knobs, if the drawer is 24” or wider you can add a second pull.

Do drawer pulls go in the center?

As far as the height of your drawer hardware, the classic choice is to center them vertically. With multiple drawers stacked on top of each other, choosing this placement makes each knob a little lower and harder to reach.

Where should cabinet pulls be placed?

Pulls. Pulls are another versatile option that can be installed on both cabinets and drawers. For both upper and lower cabinets, the pulls should be installed vertically 2 ½ – 3 inches in from the corner of the door. For drawers, they should be installed horizontally in the center of the door.

Where do you put knobs and handles on kitchen cabinets?

Cabinet Knob Placement on Doors The general rule is to place a knob 2 1/2″ – 3″ from the corner of the door. For upper cabinets, install knobs in the bottom corners of the door. For lower cabinets, place them in the upper corners.3 days ago.

Where do you put pulls on Shaker cabinets?

Center of the Stile: Knobs and pulls can be placed halfway up the stile of your Shaker door. Keep in mind you’ll want to be able to reach the handles, since they will be placed higher up along the stile. Just Above or Below the Corners: Place the knobs or pulls 2” to 3” from the lower or upper corner.

Should kitchen handles be vertical or horizontal?

The universal rule is that handles are placed vertically on doors and horizontally on pull-out drawers. Stand in your new kitchen and hold your handles against the drawers and cabinet doors to try out different heights and positions for each of them.

Should kitchen handles be centered?

There is no right or wrong size to choose, but we do recommend choosing pulls that have at least a 3-3/4″ center to center (the distance between the screw holes). This size looks pleasing on most cabinets, while still being large enough to grip comfortably.

Are cabinet handles supposed to be centered?

Where to Place Pulls on Cabinet Doors. On tall upper cabinets with a center rail such as tall linen cabinets or pantry cabinets, knobs and pulls should be centered horizontally on the stile and 2-1/2” up from the bottom of the cabinet door.

How do you install drawer pulls evenly?

Most drawer pulls are centered on the drawer fronts, but if the cabinet you’re working on has two or three drawers the same size and one larger one at the bottom, install the bottom knob (or pull) higher than the center of that drawer front. Install it so all the knobs on the cabinet are spaced evenly.

Do you put handles on fake drawers?

I would recommend putting pulls on the dummy drawers it allows for consistency. Good design is always consistent. It will also give the illusion that these drawers are not fake. The idea of putting a minimal intrusive towel bar works well because then it will serve more for function then aesthetics.

How long should Pulls be on cabinets?

While there is no set rule, we generally recommend that the pull length is approximately 1/3 of the cabinet or drawer width. Small Drawers that are 12” or less typically work best with a pull that is 3” to 4” long or a knob that is 1” in diameter.

Should drawers have knobs or pulls?

One preference is to use knobs for all doors and pulls for all drawers. For any large door such as a pantry and any pull-out door (including pull-out base pantries or trash pull-outs), use a pull. It is much more comfortable to open a drawer using a pull.

Are knobs or pulls better for kitchen cabinets?

In many instances, knobs make it easier to open upper cabinets. Pulls, on the other hand, offer easier operation of lower cabinets. Just take a look at this Victorian kitchen. You’ll notice that all the upper cabinets have knobs, while the majority of the lower cabinets feature pulls.

How do you measure for drawer pulls?

The length of the pull is important because you want it to be proportional to the size of your cabinet or drawers. We recommend a pull that is no longer than one-third of the total cabinet door height and no longer than one-half of the total drawer width.

How long should bar pulls?

Bar Pulls are traditionally measured center-to-center and they should not exceed 1/3 of the length of a cabinet door or width of a drawer. Pulls 3-7 inches in length will sit the most comfortably on doors less than 24 inches tall.